If Something Goes Wrong; Dos Facilities Missing; Vm/Pc Temporary Files Already Exist - IBM Professional Series User Manual

If Something Goes Wrong?
The VM/PC installation process is designed to be trouble
free. In the step-by-step instructions above, we have talked
about the screens you are expected to see and the actions
you are supposed to take when everything goes as intended.
If, for whatever reason, something happens that you cannot
find described earlier in this Chapter, we suggest you read
this section. If you cannot find the explanation you need
here, or elsewhere in this manual, refer to the Personal
Computer XT /370 Guide to Operations.
DOS Facilities Missing
If
you see this screen:
IBM V M / P C
INS TAL L A T ION PRO C E D U R E M E S SAG E
The procedure which copies the VM/PC system from the distribution
diskettes to your fixed disk uses DOS commands and facilities.
The installation procedure was UNABLE TO FIND one or both of the
DOS commands (BASICA or RESTORE) that it needs.
To use the VM/PC Installation Procedure, you will have to
1) copy the DOS commands onto your fixed disk, and
2) restart the installation procedure.
you need to review the list of items that must be checked
before beginning the installation process (in the "Before You
Begin" section earlier in this chapter). After doing so, start
the installation process over again at STEP 1.
VMjPC Temporary Files Already Exist
If
you see this screen:
Chapter 2. Installing VM/PC 2-19