Table of Contents
Advertisement
Properties and command line options
Table 5 describes the properties and command line options specific to this probe. For
information about generic probe properties and command line options, see the IBM Tivoli
Netcool/OMNIbus Probe and Gateway Guide, (SC23-6387).
Table 5. Properties and command line options (1 of 4)
Property name
AckSystemId string
AckUserId string
Agentheartbeat
integer
AlarmFilter string
AlarmIrpName
string
ClearSystemId
string
ClearUserId string
Command line option
-acksystemid
string
-ackuserid string
-agentheartbeat
integer
-alarmfilter
string
-alarmirpname
string
-clearsystemid
string
-clearuserid
string
Description
Processing system on which the IRP
Manager runs. This is used by the
acknowledge_alarm CLI function.
The default is "".
Name of the user acknowledging the
alarm. This is used by the acknowledge_
alarm CLI function.
The default is "".
Frequency (in seconds) with which the
probe checks the status of the IRP agent.
The default is 60.
Filter the alarm IRP uses to limit the alarms
sent to the probe.
The default is "".
Name of the Alarm IRP Agent.
The default is 32.111-3 V6.5.
Name of the IRP Manager that supports the
user who clears the alarms using the CLI.
It can be used to identify the system, such
as system 6, or it can contain no
information such as "".
The default is "".
For more information on CLI, see
"Command line interface" on page 7.
Name of the user clearing the alarms used
by the CLI function of the probe.
The identity can be a human operator such
as "John Smith", or a group such as
"Team Six", or it can contain no
information such as "".
The default is "".
For more information on CLI, see
"Command line interface" on page 7.
Probe for Nortel CNM
11
Advertisement
Table of Contents
