IBM Professional Series User Manual page 289

RELPAGE ON
releases page frames of storage and sets them to binary
zeros after the following commands complete execution:
COPYFILE, COMPARE, MACLIB, SORT, TXTLIB,
UPDATE, and the program product language processors
supported by VM/PC.
RELPAGE OFF
does not release pages of storage after the commands
listed in the RELP AGE ON description complete
execution. Use the SET RELP AGE OFF function when
debugging or analyzing a problem so that the storage
used is not released and can be examined.
OSSIM ON
loads the OSSIM module into CMS free storage to
provide the services of OS Simulation. This command is
normally used in the SYSPROF exec (system profile
exec) which is normally executed when CMS is started.
OSSIM OFF
may be used to unload the OS Simulation services of
CMS.
INPUT
a xx
translates the specified character "a" to the specified
hexadecimal code "xx" for characters entered from the
terminal.
INPUT
xx
yy
allows you to reset the hexadecimal code "xx" to the
specified hexadecimal code "yy" in your translate table.
Note: If you issue SET INPUT and SET OUTPUT
commands for the same characters, issue the SET
OUTPUT command first.
INPUT
returns all characters to their default translation.
OUTPUT
xx a
translates the specified hexadecimal representation "xx"
to the specified character "a" for all "xx" characters
displayed at the terminal.
OUTPUT
returns all characters to their default translation.
7 -116
VM/PC Users Guide