Startup Failures - IBM Professional Series User Manual

Startup Failures
During the start up period, VMjPC can detect and report
the following types of failures:
STORAGE ERROR, See VM
j
PC Users Guide RC
=
2670
A storage error was detected, press the F 1 key to
attempt a retry. If the retry is successful, the problem
may be intermittent. Record the numbered code (RC)
for reference and continue processing.
If the retry is unsuccessful, call your technical
coordinator or run the diagnostics described in the
'Diagnostic Testing' section of the PC XT
j 370 Guide to
Operations.
• PROCESSING UNIT ERROR, See VMjPC Users Guide
RC
=
2680
A processing unit error was detected, press the F 1 key to
attempt a retry. The recovery actions are the same as for
the STORAGE ERROR described above.
• HARDWARE ERROR, See VMjPC Users Guide RC
=
2681
An undetermined hardware error was detected, press the
Fl key to attempt a retry. The recovery actions are the
same as for the STORAGE ERROR described above.
nnnnnnn File Not Found, See VMjPC Users Guide RC
=
2695
A file that is necessary to complete the start up process
could not be found. nnnnnnn is the file name. It must be
reloaded from the distribution diskette. Notify your
technical coordinator or refer to the procedures in
Chapter 2 (or Chapter 3 if you have recently
~
reconfigured your system).
nnnnnnn File Bad, See VM
j
PC Users Guide RC
=
2696
4-22
VMjPC Users
Guide