Sort - IBM Professional Series User Manual

SORT
Note: &STACK HT and SET CMSTYPE HT have the same
effect when interpreted by the CMS EXEC processor.
Similarly, &STACK RT and SET CMSTYPE RT are
equivalent for the CMS EXEC processor. However, when
using EXEC 2, the commands &STACK HT and &STACK
R T cause the characters "HT" and "R T" to be placed in the
program stack and do not affect the console output. These
characters must be used by a program or cleared from the
stack. Otherwise, you will receive an "UNKNOWN
CP / CMS COMMAND" error message when they are read
from the program stack.
Usage Notes:
1.
If
you issue the SET command specifying an invalid
function and the implied CP function is in effect, you
may receive message DMKCFS026E OPERAND
MISSING OR INVALID.
2.
If
an invalid SET command function is specified from an
EXEC and the implied CP function is in effect, then the
return code is -0003.
Responses: None. To determine or verify the setting of a
function, use the QUERY command.
Messages and Return Codes:
DMSLI00021 FILE
'fn'
TXTLIB NOT FOUND RC=O
DMSSET014E INVALID FUNCTION
'function'
RC=24
DMSSET026E INVALID PARAMETER
'parameter'
FOR
'function'
FUNCTION RC=
DMSSET031E LOADER TABLES CANNOT BE MODIFIED RC=40
DMSSET047E NO FUNCTION SPECIFIED RC=24
DMSSET048E INVALID MODE
'mode'
RC=24
DMSSET050E PARAMETER MISSING AFTER
'function'
RC=24
DMSSET061E NO TRANSLATION CHARACTER SPECIFIED RC=24
DMSSET070E INVALID PARAMETER
'parameter'
RC=24
DMSSET098w CMS OS SIMULATION NOT AVAILABLE Rc=4
DMSSET100W SYSTEM NAME
'name'
NOT AVAILABLE Rc=4
Use the SORT command to read fixed-length records from a
CMS input file, arrange them in ascending EBCDIC order
according to specified sort fields, and create a new file
containing the sorted records. The format of the SORT
command is:
7-118 VM/PC Users Guide