IBM Professional Series User Manual page 29

If
you wish, you can simply let the installation program
lead you from here.
If
not, or if something happens you
don't understand, you can read the rest of these
instructions.
NOTE:
If,
at any time during installation processing,
something happens that seems to be an error, or if a
screen is presented that is not described in the
step-by-step instructions, refer to the section
"If
Something Goes Wrong?" later in this chapter.
After you press ENTER, the installation program
displays a logo screen and asks you to press ENTER to
continue.
• STEP 3. Press ENTER.
After pressing ENTER, the installation program makes
sure that the files it needs are on your C disk. The
program also checks to see if you are already using files
that have the same names as it intends to use temporarily
during the installation process. If everything is alright, it
copies several temporary files from the distribution
diskette to your C disk, and you see:
IBM V M / P C
INS TAL L A T ION PRO CEO U REM E S SAG E
The installation process has completed its preliminary checking of your
system. So far, everything is in order.
Several temporary files will now be copied to your C disk. These files
will be used to continue the installation process.
DO NOT REMOVE the diskette in drive A until told to do so.
After reading this message, press ENTER.
After you see the above screen, continue with STEP 4.
2-6
VM/PC Users
Guide