Maclib - IBM Professional Series User Manual

fm
is the filemode of the module to be loaded. If not
specified, or specified as an asterisk, all your disks are
searched for the file.
Usage Note:
You can use the LOADMOD command when you want to
debug a CMS MODULE file. After the file is loaded, you
may set address stops or breakpoints before you begin
execution with the START command; for example:
loadmod progl
cp trace
i
210ae.4
start
Responses: None.
Messages
and Return
Codes:
DMSMODOOIE NO FILENAME SPECIFIED RC=24
DMSMOD002E FILE 'fn ft' NOT FOUND RC=28
DMSMOD032E INVALID FILETYPE 'ft' RC=24
DMSMOD070E INVALID PARAMETER 'parameter' RC=24
DMSMOD104S ERROR 'nn' READING FILE 'fn ft fm' FROM DISK RC=100
DMSMOD109S VIRTUAL STORAGE CAPACITY EXCEEDED RC=104
DMSMODl16S LOADER TABLE OVERFLOW RC=104
DMSSTT048E INVALID MODE 'mode' RC=24
DMSSTT062E INVALID CHARACTER 'character' IN FILEID 'fn ft fm' RC=20
MACLIB
Use the MACLIB command to create and modify CMS
macro libraries. The format of the MACLIB command is:
7-100
VM/PC Users
Guide