Close - IBM Professional Series User Manual

CLOSE
Close
3. When issued from a local session, the CHANGE
command only applies to files that are on the local spool
queue. You must issue the VM/SP CHANGE command
from the remote session to change files that are on the
remote spool queue.
4. Spool Files whose corresponding data file cannot be
found will be placed in HOLD status and cannot be
changed to NOHOLD.
Response:
nnnn FILE(S) CHANGED
This response indicates the number of files changes;
if none are changed nnnn will be NO. This response
will not appear if you have issued the CP SET IMSG
OFF command.
Use the CLOSE command to indicate that the current spool
data is to be collected into a spool file. The format of the
CLOSE command is:
Printer FORM form
h~~adr
\ IHOld
l
[Dlst
l
urge
Where:
PRINTER
PRT
~WHo
l<ti
distcodel [NAme fn [ftl;]
closes the printer spool file.
dvcadr
closes the specified spool device.
PURGE
immediately purges the spool file. No spool file is
created.
7-14 VMjPC Users Guide