Start; State/Statew; Synonym - IBM Professional Series User Manual

START
I
SORT
f i 1 e i d 1 f i 1 e i d2
For a complete description of the SORT command refer to
the VM/SP CMS Command and Macro Reference
publication.
For an example of using the SORT command, see "eMS
SORT Command" on page 5-24.
Use the START command to begin execution of eMS
programs that were previously loaded. The format of the
START command is:
START
[ e~try
[args ... ] ]
(opt ion [)]
option:
NO
For a complete description of the START command, refer to
the VM/SP CMS Command and Macro Reference.
STATEjSTATEW
Use the STATE command to verify the existence of a eMS
file on any accessed disk; use the STATEW command to
verify the existence of a eMS file on any accessed
read/write disk. The formats of the STATE and STATEW
commands are:
I
ISTATE
t
1STATEW \
For a complete description of the STATE/STATEW
command, refer to the VM/SP CMS Command and Macro
Reference.
SYNONYM
Use the SYNONYM command to invoke a table of
synonyms to be used with, or in place of, eMS and
user-written command names. You create the table yourself
using an editor. The form for specifying the entries for the
table is described under "The Synonym Table."
Chapter 7. VM/PC Commands 7 -119