Modmap; Nucxdrop; Nucxload - IBM Professional Series User Manual

MODMAP
Use the MODMAP command to display the load map
associated with the specified MODULE file. The format of
the MODMAP command is:
I
MODmap
I
fn
For a complete description of the MODMAP command,
refer to the VMjSP CMS Command and Macro Reference.
NUCXDROP
Use the NUCXDROP command to cancel nucleus
extensions and release the storage occupied by the
corresponding program. The NUCXDROP command uses
the NUCEXT function which is described in detail in the
Function section of the publication VM j SP CMS Command
and Macro Reference.
The command format is:
I
NUCXDROP
~~amel
name2 ....
~
For a complete description of the NUCXDROP command,
refer to the VMjSP CMS Command and Macro Reference.
NUCXLOAD
Use NUCXLOAD to install nucleus extensions. The
command loads either an ADCON-free, serially reusable, or
relocatable module into free storage and installs it as a
nucleus extension. The nucleus extension is invoked by
issuing the name of the nucleus extension. The
NUCXLOAD command uses the NUCEXT function which
is described in detail in the Function section of the
publication VM j SP CMS Command and Macro Reference.
The format of the command is:
7-102 VM/PC Users Guide