Chapter 8. Vm/Pc Messages; How To Use This Chapter; Identifying Issuing Component - IBM Professional Series User Manual

Chapter 8. VMjPC Messages
How To Use This Chapter
This chapter lists messages alphabetically by the first words
of the message.
Note: Some messages begin with a replacement value, such
as:
userid NOT IN REMOTE DIRECTORY
When the message is issued, 'userid' is replaced with an
actual userid. Since we cannot tell what this userid will be,
we cannot alphabetize the message. All messages that start
with a replacement value are listed at the beginning of the
Message Explanation section.
Identifying Issuing Component
This Chapter contains messages issued by the following
components of VM/PC:
• VM/PC CMS - These messages are listed here followed
by the identifier (DMSxxxx). The xxxx is replaced by a
number, like OOIE, if the message has a number. (See
Note that follows.)
VM/PC CP - These messages are listed here followed
by the identifier (DMKxxxx). The xxxx is replaced by a
number, like OOIE.
• CP Termination Messages - These messages are listed
here followed by the identifier (DMKxxxT). The xxx is
replaced by a number.
• VMPCSERV - These messages are listed here followed
by the identifier (SERV).
Note: Not all possible VM/PC CMS Messages are
explained here. A complete list of CMS messages is given in
Chapter 8. VM/PC Messages 8-1