The Password Screen; Function Menu Screen - IBM Professional Series User Manual

A-Z
0-9
. and:
(The Configurator converts lowercase to
uppercase for you.)
(These characters are allowed only in
filenames)
No leading blanks are permitted in USERIDs, passwords and
filenames. No imbedded blanks are permitted for any item.
If
you do enter an invalid character, the system will reject it.
You can then correct the error and enter it again.
The Password Screen
After reading in the Configuration file, or determining that it
needs to build a new one, the Configurator presents you with
a screen that prompts you for your password. This is the
password that is required in order to see or change the
Configuration file.
The Configuration file installed with VM/PC requires a
password of "SYSTEM."
To continue, type the password and press ENTER.
If, for whatever reason, you choose not to continue, you can
return to DOS simply by pressing function key 10 (FlO).
Your Configuration file will not be changed.
Function Menu Screen
After providing the proper password, you will see the
FUNCTION MENU screen, which is considered the main
screen presented by the Configurator program. This screen,
shown below, gives you a choice of six functions. To choose
a function, type the number of the function you wish to
perform, a number from 1 to 6, and press ENTER.
3-6
VM/PC Users
Guide