IBM Professional Series User Manual page 307

dvcadr NOT DEFINED; SPACE NOT AVAILABLE
(DMK091E)
The temporary device has not been defined because
sufficient blocks could not be found to allocate it.
mode (cuu) is not available from the remote server
(DMS803E)
The remote server has been restarted, and no longer has
a link for you to the requested disk. Link to the disk
again and re-try the ACCESS.
mode (cuu) read-only (DMS723I)
The specified disk is accessed in read-only mode.
name ENVIRONMENT DOES NOT EXIST (DMK044E)
The control program cannot find the environment that
you have entered.
name ENVIRONMENT EXCEEDS STORAGE
(DMK170E)
The environment you entered is larger that your virtual
machine storage size. Either enter another environment
that will fit within that storage size or re-define your
virtual machine storage size.
'nnn' FB-512 blocks formatted on disk 'mode(cuu)'
(DMS732I)
This message tells you how many blocks have been
formatted on the specified disk.
'option' and 'option' are conflicting options (DMS066E)
The specified options are mutually exclusive. Reissue the
command specifying only one of the options.
'option' option specified twice (DMS065E)
The option was specified more than once in the
command line. Reissue the command specifying the
option only once.
userid dvcadr NOT LINKED; ALREADY DEFINED
(DMKIIOE)
The device you entered was not linked because your
virtual machine configuration already has a device with
the same address.
8-4 VM/PC Users Guide