Include - IBM Professional Series User Manual

noted. If a PC file with 100 bytes is to be imported, the
resultant CMS file will have 2 records of 80 bytes each,
with the second record padded with x'OO' to a length of
80.
3. If the EOL option is used, the maximum LRECL value
which may be specified is 65535. If the NOEOL option
is used, the only restriction on the LRECL value is the
size of your virtual machine, since an I/O buffer this size
must be acquired.
4. A file which has been exported, translated to ASCII, and
subsequently imported may differ from the original file,
due to the translate tables used in the file
transformations. The NOASCII options should be used
to avoid problems caused by this transformation.
Appendix
~,
"ASCII to EBCDIC Conversion" on page
E-l lists the EBCDIC-ASCII conversion tables which
are used in this translation.
Messages and Return Codes:
DMSIMP002E File 'd:filename.ext' not found RC=28
DMSIMP003E Invalid option 'option' RC=24
DMSIMP024E File 'fn ft fm' already exists -- specify
'replace' RC=28
DMSIMP029E Invalid parameter 'parameter' in the option
'option' field RC=24
DMSIMP037E Disk 'mode' is read/only RC=36
DMSIMP042E No fileid(s) specified RC=24
DMSIMP048E Invalid mode 'mode' RC=24
DMSIMP054E Incomplete fileid specified RC=24
DMSIMP062E Invalid
*
in fileid RC=20
DMSIMP070E Invalid parameter 'parameter' RC=24
DMSIMP105E Error 'nn' writing file 'fn ft fm' on disk RC=100
DMSIMP622E Insufficient stora~e available RC=41
DMSIMP804E Invalid PC fileid d:filename.ext' RC=20
DMSIMP805E Import terminated, file 'd:filename.ext'
truncated RC=100
DMSIMP807S Drive d not ready. Make drive ready and press enter
DMSIMP907E I/O error on file 'd:filename.ext' RC=256
DMSSTT048E Invalid mode 'mode' RC=24
DMSSTT062E Invalid character 'char' in fileid 'fn ft fm' RC=20
DMSSTT069E Disk 'mode' not accessed RC=36
INCLUDE
Use the INCLUDE command to read one or more TEXT
files (containing relocatable object code) from disk and to
load them into virtual storage, establishing the proper
linkages between the files. A LOAD command must have
been previously issued for the INCLUDE command to
produce desirable results. For information on the CMS
Chapter 7. VM/PC Commands 7-97