Chapter 4. Getting Started; Invoking Vm/Pc - IBM Professional Series User Manual

Chapter 4. Getting Started
Invoking VMjPC
VM/PC runs on your IBM Personal Computer XT/370 as a
DOS 2.00 application. The required files were copied when
you installed VM/PC according to the instructions in
Chapter 2, "Installing VM/PC" on page 2-1. You start
VM/PC by entering the command VMPC in either of these
ways:
If
you want to start VM/PC every time you start DOS,
you can enter the command by using the automatic
program execution procedure described in the Disk
Operating System manual.
• If you want to start VM/PC via keyboard entry, you can
enter the command and press the ENTER key in
response to the DOS prompt ( C
».
For example:
C >VMPC
After you enter the VMPC command, you see an
introduction screen which contains the product name and the
IBM copyright statement.
Chapter 4. Getting Started
4-1