IBM Professional Series User Manual page 156

INSTALL exec was invoked by the CMS user's profile with
a delay value of 100. When you restart the installation, you
should invoke the INSTALL exec with a larger delay value
(150 or 200). If the installation continues to fail, you should
continue to increase the delay value. Prior to re-starting the
installation, you should erase any files created by the install
process on your remote system A-disk.
VMPCSERV installation places 15 files on your remote VM
system. If you have files there with the same names as those
VMPCSERV is trying to install, the installation will fail.
Before installing VMPCSERVyou must rename or erase any
files on your remote VM system that have these filenames
and filetypes:
•
DISPAX TEXT
•
DISPIO TEXT
•
GENPCSER EXEC
•
HEXIN ASSEMBLE
•
HSTCMS TEXT
•
HSTCOM TEXT
•
HSTFSR TEXT
•
HSTGMEAC TEXT
HSTGMELN TEXT
HSTHYPE TEXT
HSTLOGO TEXT
•
HSTSPL TEXT
HSTVSI TEXT
•
VMPCSERV EXEC
•
VMPCSERV MODULE
If the uploading of one or more text files in part 2 of the
install fails, but the HEXIN module has been created
successfully on your remote system, you can restart the
install process by issuing the command "PROFILE" on the
local session, and skip part 1 of the install. You may also
load the text files in part 2 of the install selectively if only 1
or 2 of the files was not loaded successfully. Before
restarting the installation, you should erase any of the text
files uploaded to your remote system which you will be
trying to upload again.
Chapter 6. Remote Services 6-7