Load; Loadmod - IBM Professional Series User Manual

LOAD
LOAD
Use the LOAD command to read one or more CMS TEXT
files (containing relocatable object code) from disk and to
load them into virtual storage, establishing the proper
linkages between the files. The format of the LOAD
command is:
fn... [(options ... [)]]
options:
[~~~~~AR
] [RESET
~ en~ry~
] [OR I GIN
~ ~~~~~c~
]
[~~~AP
]
[~6~~PE
]
[~~y
NV ]
[~~~EP
]
[~gl~TOJ
[
LIBE ] [START]
[QYE ]
[RLDSAVE]
NOLIBE NODUP
The RLDSA VE option controls whether the CMS loader
saves relocation information in an internal buffer as the text
files are loaded.
If
this information is saved, the GENMOD
command will append it to the CMS module when it is
created. This information is used by the NUCXLOAD
command, if the module is loaded as a nucleus extension, to
relocate the module to the area where it has been loaded.
For a complete description of the LOAD command, refer to
the VM / SP CMS Command and Macro Reference.
LOADMOD
I
LOADMod
Use the LOADMOD command to load a MODULE file into
storage. The file must be in the format which is created by
the GENMOD command. The format of the LOADMOD
command is:
Where:
fn
is the filename of the file to be loaded into storage. The
filetype must be MODULE.
Chapter 7. VM/PC Commands 7 -99