IBM Professional Series User Manual page 17

• ASCII to EBCDIC Conversion (those interested in data
representation)
• Distribution Diskette Contents. (those interested in file
names)
The VM / PC User's Guide has the following parts:
1. Introduction - This is an overview of the VM/PC
system.
It
tells what you need, what you get, and how
the pieces interact. All users should read this chapter.
2. Installing Your System - This is a step-by-step procedure
to follow when bringing up your VM/PC system. All
users who must install VM/PC should read this section.
If VM/PC has already been installed on your Personal
Computer, you need not read this chapter.
3. Configuring Your System - This tells why you might, and
how you would, configure your system.
It
includes a
step-by-step example of a basic configuration process.
All users should read at least the introduction to this
chapter.
4. Getting Started - This tells what to do to begin using
VM/PC on your Personal Computer.
It
explains the
Keyboard (and how to use it), the terminal screen (and
how to read it), Session Selection, Logon, and the
History Buffer. All users should read this chapter.
5. Using VM/PC Commands to Do Work - This
documents commonly used VM/PC commands, grouped
by task. There are descriptions of which commands to
use to do work for you and examples of how you would
use them. All users should read this chapter.
6. Remote Services - Information on Remote/Local
sessions, Upload/Download, and Local and Remote
Spooling. Anyone who needs to install the Remote
Server program to enable a Remote/Local session
should read this chapter. If the Remote Server has
already been installed at the remote system, you need
not read the installation section. Anyone who wants
further information about using Remote/Local sessions
should read this chapter.
1-4
VM/PC Users
Guide