IBM Professional Series User Manual page 188

FORM
form
specifies the form name for the spool file. The form
name is a 1-8 alphanumeric value. If FORM is not
specified, the file is created with the form name
indicated by the last SPOOL command.
HOLD
overrides the SPOOL NOHOLD option and places
the spool file in HOLD status. The file is released by
issuing a CHANGE command with the NOHOLD
operand.
NOHOLD
overrides the SPOOL HOLD option making the file
immediately selectable for spool processing.
DIST
[distcode]
specifies the distribution code the spool file is to be
given.
NAME
fn
[ft]
assigns identification to the file in the CMS format
of filename and filetype. If ft is not specified, it is
set to blanks.
Usage Notes:
1. The HOLD /NOHOLD options take precedence over
the current spool attributes.
2. The CLOSE command has no effect if the CONT is one
of the current spool attributes.
Responses:
PRT FILE
spoolid
SPOOLED
This response indicates the spoolid created. This
response will not appear if you have issued the CP
SET IMSG OFF command.
PRT FILE SPOOLED TolFOR
userid
This response indicates the spool file has been
routed to the Remote Server. This response will not
appear if you have issued the CP SET IMSG OFF
command.
Chapter 7. VM/PC Commands 7 -15