Replacing Toner Cartridge - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

3 Maintenance
Emptying the Hole Punch Waste Container (for Finisher-C1 or Finisher-C1 with Booklet
Maker).........................................................................................................................................73
Replacing Stamp .........................................................................................................................74

Replacing Toner Cartridge

The following messages are displayed on the touch screen depending on the amount
of toner remaining. Replace the toner cartridge according to the message.
Please order a Toner
Cartridge.
The Toner Cartridge needs
to be replaced.
3
*1 The remaining page yield for copy/print jobs is applicable when A4 paper LEF (
Use a broom or a wet cloth to wipe off spilled toner. Never use a vacuum cleaner
for the spills. It may catch fire by electric sparks inside the vacuum cleaner and
cause explosion. If you spill a large volume of toner, contact your local Fuji Xerox
representative.
Never throw a toner cartridge into an open flame. Remaining toner in the cartridge
may catch fire and cause burn injuries or explosion.
If you have a used toner cartridge no longer needed, contact your local Fuji Xerox
representative for its disposal.
Important • When you replace a toner cartridge, toner may spill and soil the floor. We recommend laying
60
Message
Remaining Page Yield
Approx. 4,000 pages
value is an estimate and varies depending on the conditions such as the content printed, dot
coverage (area coverage), paper size, paper type, copy/print density, output image type, and the
machine operating environment.
WARNING
paper on the floor beforehand.
• The use of toner cartridges not recommended by Fuji Xerox may degrade image quality and
performance. Use only toner cartridges recommended by Fuji Xerox.
• When the remaining amount of toner is low, the machine may stop printing and display a
message. If this occurs, replace the toner cartridge to resume copying or printing.
• Replace toner cartridge while the machine is on.
• When the machine is in Energy Saver mode, exit Energy Saver mode by pressing the
<Energy Server> button on the control panel before you replace the toner cartridge.
• When you replace the toner cartridge, press the <Machine Status> button and check the
current status for the toner cartridge even when the control panel is lit.
• After the message "Replace the toner cartridge" appears on the touch screen, copy or print
density may be reduced slightly.
• If a partially used toner cartridge is used, a message appears and the number of pages that
you can copy or print displayed on the screen may differ considerably.
*1
You do not need to replace the
toner cartridge immediately.
Order the toner cartridge
displayed on the screen.
- The machine will stop. Replace
the toner cartridge with a new
one.
Solution
) is used. The