Installation Of Mfp Controller Options - Gestetner B070 Service Manual

1.12 INSTALLATION OF MFP CONTROLLER OPTIONS

1.12.1 OVERVIEW
To facilitate the installation of MFP options, 6 slots for boards and 3 slots for SD
cards are provided on the side of the controller box. Each board or SC card must
be inserted into its assigned slot. The slot assignment of each item is listed in the
table below, and a decal with the same information is attached to the controller box
cover.
MFP Option Slot Assignment
Slot Decal Name
A1 External CTL
A2 Tandem
B1 File Format Converter
B2 Parallel (1284)
B3 1394/802.11b/USB2.0
B4 Ethernet
C1 Printer/Scanner
C2 Option PDL
C3 Service
The large slots [A] are for boards (cards) and the
small slots [B] are for the SD cards. Slot C3 [C] is
on the other side of the controller box.
SM
CÓPIA NÃO CONTROLADA
INSTALLATION OF MFP CONTROLLER OPTIONS
Description
I/F board for an external controller such as EFI
Copier Connection Kit B328
MLB (Media Link Board) B609
IEEE 1284 Centronics Parallel Interface B580
IEEE 1394 (FireWire) B581
IEEE 802.11b (Wireless LAN) B582
USB 2.0 B596
Note: Only one of the cards can be inserted at a time.
NIC Kit B580 (100Base TX/10BaseT)
NIC Board B594 (100Base TX/10BaseT)
SD card for Printer/Scanner Kit B580
SD card for PS3 B613
SD card for Machine Firmware update by the customer
engineer.
[B]
1-75
CÓPIA NÃO CONTROLADA
[A]
[C]
B580I101.WMF
B070/B071