Pressure Roller Cleaning Roller - Gestetner B070 Service Manual

3.11.9 PRESSURE ROLLER CLEANING ROLLER

[B]
[A]
B070R505.WMF
1. Open both front doors and pull out the fusing unit.
2. Screw [A].
3. Pull out the pressure roller cleaning roller assembly [B] to dislodge it from the
pins [C].
4. Two spring plates [D] ( x 1 each).
5. Replace the pressure roller cleaning roller [E] and shaft [F] (bearings x 1,
spacer x 1).
Re-assembly
• Fit the holes [G] (rear then front) of the pressure roller cleaning roller unit bracket
onto the pins [C].
• While turning the pressure roller cleaning roller assembly counterclockwise, push
the pressure roller cleaning roller assembly to the rear until it locks in place, then
secure it with the screw [A].
SM
CÓPIA NÃO CONTROLADA
[G]
3-113
CÓPIA NÃO CONTROLADA
FUSING UNIT
[C]
[D]
[E]
[F]
B070R506.WMF
B070/B071