Sp6-Nnn Peripherals - Gestetner B070 Service Manual

SERVICE PROGRAM MODE TABLES
⇒

SP6-nnn Peripherals

SP
6006 DF Registration Adjustment
001
002
003
004
6007 ADF Input Check
001
002
003
6008 ADF Output Check
6009 DF Free Run
6016 ADF Motor Speed Auto Adjustment
6105 Staple Position Adjustment
B070/B071
CÓPIA NÃO CONTROLADA
Number/Name
Side-to-Side
Leading Edge (Thin Original)
Leading Edge (Duplex 1st)
Leading Edge (Duplex-2nd)
Group 1
Group 2
Group 3
CÓPIA NÃO CONTROLADA
Function/[Setting]
Adjusts the printing side-to-side registration
in the ADF mode.
[-3~+3 / 0 / 0.1 mm]
•
Use the " /*" key to toggle between + and –.
Adjusts the original stop position.
[-10~+10 / 0 / 0.13mm]
•
Use the " /*" key to toggle between + and –.
Adjusts the original stop position against
the original left scale in one-sided original
mode, and the first side of duplex originals.
[-29~+29 / 0 / 0.13mm]
•
Use the " " key to toggle between + and –.
Adjusts the original stop position against
the original left scale for the second side of
duplex originals.
[-29~+29 / 0 / 0.13mm]
•
Use the " " key to toggle between + and –.
Displays the signals received from sensors
and switches of the ADF. ( 5.4.2)
Displays the signals received from sensors
and switches of the ADF. ( 5.4.2)
Displays the signals received from sensors
and switches of the ADF. ( 5.4.2)
Turns on the ADF electrical components
individually for testing. ( 5.5.2)
Performs an ADF free run in two-sided
original mode. Press "1" to start.
This is a general free run controlled from
the copier
After pressing the Start key, the machine
automatically adjusts the speeds of the
ADF motors in the following order:
Feed-in motor →
Transport Motor →
Feed-out Motor (High) →
Feed-out Motor (Low)
Adjusts the stapling position in the main
scan direction
[-3.5~+3.5 / 0 / 0.5 mm]
•
Use the " " key to toggle between + and –.
A larger value causes the stapling position
to shift outward.
5-52
Rev. 6/2004
SM