Scanner Service Table - Gestetner B070 Service Manual

SERVICE PROGRAM MODE TABLES

5.2.3 SCANNER SERVICE TABLE

SP Number/Name
1001 System
001 Model Name
002 Scanner Firmware Version
003 Scanner Firmware Number
004 Detail Model Name
1002 Error Log Display
1004 Compression Type
1005 Erase Margin
1006 Auto Reset Timer
1007 Store Priority
2002 Text Mode Setting
001 MTF Filter Coefficient
(Main scan)
002 MTF Filter Coefficient
(Sub scan)
003 MTF Filter Strength
(Main scan)
004 MTF Filter Strength
(Sub scan)
2002 005 Smoothing Filter
B070/B071
CÓPIA NÃO CONTROLADA
Displays the model name.
Displays the scanner firmware version.
Displays the firmware's part number.
Displays the detail model name.
Displays the error log data.
Selects the compression type for binary
picture processing.
[1-3/1/1]
1: MH, 2: MR, 3: MMR
Creates an erase margin for all edges of the
scanned image.
If the machine has scanned the edge of the
original, create a margin.
[0 – 5/0/1mm]
Adjusts the auto reset timer for the scanner
function.
If this is "0", the auto reset function is
disabled.
[0, 10 – 99/60/1s]
Selects the default setting of the store priority
when the main switch is turned on.
[1 – 3/1/1]
1: Send only
2: Store only
3: Send + Store
Selects the MTF filter coefficient in the main
scan direction for Text mode.
Select a higher number for a stronger filter.
If this is "0", the MTF filter is not applied.
[0~13/7/1]
Selects the MTF filter coefficient in the sub
scan direction for Text mode.
Select a higher number for a stronger filter.
If this is "0", the MTF filter is not applied
[0~13/7/1]
Selects the MTF filter strength in the main
scan direction for Text mode.
Select a higher number for a stronger filter.
[0~7/2/1]
Selects the MTF filter strength in the sub scan
direction for Text mode.
Select a higher number for a stronger filter.
[0~7/2/1]
Selects the smoothing pattern for Text mode.
A larger value is smoother. A smaller value
could cause moiré to appear in the image.
[0~7/0/1]
5-68
CÓPIA NÃO CONTROLADA
Function/[Setting]
SM