PAPER FEED
3.10.18 TANDEM TRAY SIDE REGISTRATION
[B]
B070R656.WMF
Normally the side registration of the image can be adjusted in the SP mode.
If the punch hole positions are not aligned from a particular feed station, however,
you can manually adjust the side registration by changing the tray cover position
for that tray, and then adjust the side registration of the image with SP1002 001
Side-to-side Registration - 1st Tray (Copier Tandem Tray).
1. Pull out the tray and remove the right inner cover [A].
2. Loosen the screws and adjust the position of the plate [B].
Adjustment range: 0 ± 2.0 mm adjustment step: 1.0 mm/step
B070/B071
CÓPIA NÃO CONTROLADA
3-98
CÓPIA NÃO CONTROLADA
[A]
SM