Installing The Transfer Belt - Gestetner B070 Service Manual

[B]
[A]
[G]
[G]
B070R556.WMF
5. Turn the belt drive roller holder [A] clockwise (front view) and remove the
transfer belt [B].
6. Clean both sides of the transfer belt with a dry cloth.
CAUTION: Do not use alcohol.
Before Installing or Replacing the Transfer Belt
Clean the following items with alcohol:
• Belt drive roller [C]
• Belt roller [D]
• Bias roller [E]

Installing the Transfer Belt

1. Position the transfer belt at the center of the belt roller [D] so both marks [F] are
visible.
2. Position the transfer belt under the bias terminals [G] (see the previous page).
SM
CÓPIA NÃO CONTROLADA
[C]
[D]
3-69
CÓPIA NÃO CONTROLADA
TRANSFER BELT UNIT
[E]
B070R023.WMF
[F]
B070R524.WMF
B070/B071
[G]