3.10 PICK-UP SOLENOID
1. Remove the rear, front, and top covers. (!3.2)
2. Remove the pick-up solenoid [A] ( x 2, x 1, harness clamp x 1)
NOTE: When re-installing the solenoid, make sure that the arm of the solenoid is
positioned above and in contact with the plate of the pick-up roller shaft
below. To confirm correct installation, manually move the solenoid to the
left and right. When the solenoid plunger is moved, the pick-up roller
should move up and down smoothly.
SM
CÓPIA NÃO CONTROLADA
REPLACEMENT AND ADJUSTMENT
[A]
13
CÓPIA NÃO CONTROLADA
B512R013.WMF
B512