Paper Sizes By Feed Station - Gestetner B070 Service Manual

SPECIFICATIONS

1.3 PAPER SIZES BY FEED STATION

The tables on the next three pages describe how paper size detection operates,
depending on the geographical area, namely, North American, Europe/Asia, and
China.
Here are important notes and the key for reading these tables.
General Notes
Symbol Meaning
! Tandem Tray
"
A3/DLT Kit B331 Installed
#
Main Machine Universal Trays
$
%
& LCT B511
'
(
Bypass Tray B512 (Installed on LCT B511)
Key
Trays !, ", ' are fixed trays and do not support automatic paper size detection.
Use this key for columns
Symbol Meaning
Paper size must be selected with an SP code.
)
*
A Custom Size must be selected with an SP code.
#, $, %, &
Trays
selected by manually setting the dial on the tray.
position of the actuator plates. Use this key for columns
Symbol Meaning
Paper size is detected automatically by paper size detection sensors.
+
Set dial setting to ,, move the fences to the correct positions for the paper
)
size, then select paper size with the Tray Paper Settings button.
Setting the dial to , and moving the size fences does not detect the paper
-
size. Select paper size with the Tray Paper Settings button.
(
Tray is the optional Bypass Tray B512. Use this key for column
Symbol Meaning
Paper size is detected automatically by the position of the side fence and one
+
paper length sensor.
Paper size can be detected after the operator selects the bypass tray as the
feed source, pushes  on the operation panel, then select the paper size with
)
the Tray Paper Settings button.
NOTE: The side fences and end fence can be adjusted freely to accept any paper
size. However, only a limited number of standard paper sizes can be
detected automatically. For details, refer to Column 8 (
Tray B512 manual ("Paper Size Detection").
B070/B071
CÓPIA NÃO CONTROLADA
!, ", '.
are universal paper cassettes.
CÓPIA NÃO CONTROLADA
#, $:
%, &:
Paper size depends on the
#, $, %, &.
7-6
Paper size can be
(.
(
) and the Bypass
SM