1.1.3 MINIMUM SPACE REQUIREMENTS
Place the copier near the power source, providing clearance as shown below. The
same amount of clearance is necessary when optional equipment is installed.
Copier + Finisher + LCT + By-pass Tray
400 mm (16")
Copier + Finisher
400 mm (16")
NOTE: The controller box door on the back of the machine swings open and can
be removed. (!1.2.3) Door removal is required only if the machine cannot
pass through a narrow door.
SM
CÓPIA NÃO CONTROLADA
200 mm (8")
555 mm (22")
555 mm (22")
1-3
CÓPIA NÃO CONTROLADA
INSTALLATION REQUIREMENTS
30 mm (2")
B070I410.WMF
200 mm (8")
30 mm (2")
B070I023.WMF
B070/B071