Auto Off Mode; Entering Auto Off Mode; Disabling Auto Off Mode - Gestetner B070 Service Manual

ENERGY CONSERVATION MODES

6.18.4 AUTO OFF MODE

Auto off mode is used only if no optional printer/scanner unit is installed.

Entering auto off mode

The machine enters auto off mode when one of the following is done.
• The auto off timer runs out after the last job (User Tools – System Settings –
Timer Setting – Auto Off Timer: default setting is 90 min)
• The operation switch is pressed to turn the power off
What happens in auto off mode
When the machine enters auto off mode, the fusing lamps and all dc supplies
except +5VE/12VE (+5V/12V for energy saver mode) turn off.
Returning to stand-by mode
The machine returns to stand-by mode when the main operation switch is pressed.
Operation Energy
Switch Saver LED
Off Off

Disabling auto off mode

If the user wishes to disable auto off mode, use the following user tool: User Tools
– System Settings – AOF (change the setting to 'OFF').
B070/B071
CÓPIA NÃO CONTROLADA
Approx.
Fusing Temp. Recovery
Room Temp.
(Fusing lamp off)
6-156
CÓPIA NÃO CONTROLADA
System
+5V
Time
360 s Off
Note
Only +5VE/+12VE is
supplied to the
Controller, MB, HDD.
SM