Rear Covers And Controller Box Door; Opening The Controller Box - Gestetner B070 Service Manual

3.3.4 REAR COVERS AND CONTROLLER BOX DOOR

[B]
[A]
Rear Covers
1. Disconnect the ADF connector [A].
2. Rear upper cover [B] ( x 4).
3. Rear lower cover [C] ( x 4).

Opening the Controller Box

1. Remove the screws on the left [D] ( x 3).
2. Swing open the controller box.
NOTE: To close the controller box door, fasten the top screw first to ensure
that the holes for the other two screws are aligned correctly with the
holes of the machine frame, then fasten the other two screws.
SM
CÓPIA NÃO CONTROLADA
[C]
3-9
CÓPIA NÃO CONTROLADA
DOORS AND COVERS
[D]
B070R911.WMF
B070/B071