Dip Sw Leds And Test Point Leds - Gestetner B070 Service Manual

5.13 DIP SW LEDS AND TEST POINT LEDS

5.13.1 DIP SWITCHES
BCU
NO. NA EUR/A
1 OFF
ON
2 OFF ON
3 OFF OFF
OFF OFF
4
OFF OFF
5
6 OFF OFF
OFF OFF
7
OFF OFF
8
ADF Main Board
DPS100
4 3 2 1
0 0 0 0 Normal operating mode
0 0 0 1 Motor Test: Transport motor – Forward
0 0 1 0 Motor Test: Transport motor – Reverse
0 0 1 1 Motor Speed Adjustment (Automatic)
Original stop position adjustment – Single-sided original mode
0 1 0 0
0 1 0 1 Original stop position adjustment – Double sided original mode
1 0 0 0 Free Run: Single-sided original mode with skew correction
1 0 1 0 Free Run: Single-sided original mode without skew correction
0 1 1 0 Free Run: Double-sided original mode
Others Do not select
IEEE 802.11b (Wireless LAN) (Option)
NO. NA EUR/A
1 --- ---
IEEE 1394 (FireWire) (Option)
NO. NA EUR/A
1 --- ---
MCU
DIP SW No.1 must be ON, and all others (No.2 ~ No.4) OFF.
SM
CÓPIA NÃO CONTROLADA
DIP SW LEDS AND TEST POINT LEDS
COMMENTS
NA: Only SW1 Set to ON, Others OFF.
EUR/A: Only SW2 set to ON, Others OFF
Do not change these settings.
Description
"SADF" LED turns on when one of DIP switch turns on.
COMMENTS
Not used with this machine.
COMMENTS
Not used with this machine.
5-123
CÓPIA NÃO CONTROLADA
(No original skew correction)
B070/B071