Fusing Entrance Guide - Gestetner B070 Service Manual

6.16.2 FUSING ENTRANCE GUIDE

The entrance guide [A] for this machine is adjustable for thick or thin paper by
changing the screw position from the upper to the lower.
With thin paper, set the entrance guide in the upper position. This slightly lengthens
the paper path, which prevents the paper from creasing in the fusing unit.
With thick paper, set the entrance guide in the lower position. This is because thick
paper does not bend as easily, and is therefore less prone to creasing. In addition,
the lower setting allows more direct access to the gap between the hot and
pressure rollers. This prevents thick paper from buckling against the hot roller,
which can cause blurring at the leading edge of the copy.
In this model, the transfer belt improves paper transport and stabilizes the paper
path to the fusing entrance. This reduces the chance of paper creasing due to
paper skews in the fusing unit.
Use the screws to adjust the guide plate position. Since there are very few reasons
to change the guide plate position, there is no guide plate position adjustment lever
for customer use.
SM
CÓPIA NÃO CONTROLADA
6-129
CÓPIA NÃO CONTROLADA
FUSING
[A]
B070D009.WMF
B070/B071