Gestetner B070 Service Manual page 53

[A]
6. Set the optics dust filter [A].
7. Loosen the two screws of the bracket [B].
8. Attach the original exit tray at [C] ( x 2, M4 x 12) and [D] ( x 1, M 4 x 8)
NOTE: To prevent damage to moving parts inside the machine, never use
these long screws (M4 x 12) to fasten any exterior cover.
9. Re-tighten the screws of the bracket [B] ( x 1).
10. Re-attach the right upper cover ( x 4).
11. Remove the tape from the operating instructions holder and attach it to one of
the front doors.
12. At the back of the machine, connect the ADF to the copier body.
13. Plug in the power cord, turn the main switch on, then follow the instructions
printed on the inside cover of the front door to install the toner bottles.
SM
CÓPIA NÃO CONTROLADA
B070I506.WMF
1-19
CÓPIA NÃO CONTROLADA
COPIER (B070/B071)
[D]
[C]
B070I018.WMF
[B]
B070/B071