LCT (B511)
CAUTION
All anti-condensation heaters are disconnected from the AC drive board
before shipping. Before plugging in the AC harness connector, make sure
that the main switch of the copier is switched off and that the power cord is
unplugged.
12. Connect the AC harness connector [A] to the AC drive board [B].
NOTE: The main switch must be switched off when the heater AC harness
connector is connected to the AC drive board, in order for the transfer
anti-condensation drum heater to switch on/off with other optional
heaters.
13. Hang the harness on the clamp under the AC drive board.
B070/B071
CÓPIA NÃO CONTROLADA
1-40
CÓPIA NÃO CONTROLADA
[B]
[A]
B511I133.WMF
SM