Gestetner B070 Service Manual page 191

B070R015.WMF
7. Install the 1st scanner and adjust the position with the positioning tools [A].
8. Secure the 1st scanner with the scanner wire bracket [B] ( x 1).
9. Tighten the tension bracket [C] and remove the tape.
10. Remove the positioning tools. After sliding the scanner to the right and left
several times, set the positioning tools to check the scanner wire bracket and
the tension bracket again.
11. Reassemble the scanner and do the scanner and copy adjustments (!3.15)
SM
CÓPIA NÃO CONTROLADA
[A]
3-33
CÓPIA NÃO CONTROLADA
SCANNER UNIT
[B]
[C]
B070R013.WMF
B070/B071