AFL2-W15B-H61
3.13.6 USB Device Connection
NOTE:
User must install the USB 3.0 driver before connecting a USB device to
the system or else the system may not recognize the connected
device.
There are three USB 2.0 connectors and two USB 3.0 connectors on the AFL2-W15B-H61.
To connect a USB device, please follow the instructions below.
Step 1:
Locate the USB connectors. The locations of the USB connectors are shown
in Chapter 1.
Step 2:
Align the connectors. Align the USB device connector with one of the
connectors on the AFL2-W15B-H61. See
Figure 3-31: USB Device Connection
F igure 3-31.
9 2 3 H
Page 47