Rfid Reader Installation (Optional); Figure 3-7: Back Cover Retention Screws; Figure 3-8: Internal Cover Retention Screws - IEI Technology afl2-w15b-h61 Introductory Manual

3.6 RFID Reader Installation (Optional)

An optional RFID reader can be installed in the AFL2-W15B-H61. To install the RFID
reader, follow the instructions below.
Step 1: Remove a total of ten (10) retention screws from the back cover (

Figure 3-7: Back Cover Retention Screws

Step 2: Remove the seven (7) retention screws securing the internal aluminum cover to
the chassis (

Figure 3-8: Internal Cover Retention Screws

Page 26
F igure 3-8).
8 9 4 H
AFL2-W15B-H61
F igure 3-7).
8 9 3 H