Usb Device Connection; Figure 4-35: Serial Device Connector - IEI Technology PPC-3708A-N270 User Manual

Figure 4-35: Serial Device Connector

Secure the connector. Secure the serial device connector to the external
Step 3:
interface by tightening the two retention screws on either side of the connector.
S t e p 0 :

4.12.4 USB Device Connection

To connect a USB 2.0 or USB 1.1 device, please follow the instructions below.
Locate the USB connectors. The locations of the USB connectors are shown
Step 1:
in Chapter 2.
Align the connectors. Align the USB device connector with one of the
Step 2:
connectors on the bottom panel. See Figure 4-36.
Page 60
PPC-37xx-N270 Panel PC