IEI Technology AFL2-17AB-H61 Series User Manual
  1. Manuals
  2. Brands
  3. IEI Technology Manuals
  4. Touch Panel
  5. AFL2-17AB-H61 Series
  6. User manual

IEI Technology AFL2-17AB-H61 Series User Manual

Flat bezel panel pc
Hide thumbs Also See for AFL2-17AB-H61 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
AFL2-17AB-H61
MODEL:
AFL2-17AB-H61 S e rie s
Flat Bezel Panel PC with 2nd/3rd Generation Intel® Core™ i7/ i5/ i3 and
Pentium® processor, Touch Screen, Wi-Fi, USB, Dual GbE LAN ,
Re v. 1.30 - 9 De c e m b e r, 2016
RS-232/422/485, 2M pixels Camera,
HD Audio and RoHS
Us e r Ma n u a l
Us e r Ma n u a l
Page I

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AFL2-17AB-H61 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for IEI Technology AFL2-17AB-H61 Series

Summary of Contents for IEI Technology AFL2-17AB-H61 Series

  • Page 1 AFL2-17AB-H61 MODEL: AFL2-17AB-H61 S e rie s Flat Bezel Panel PC with 2nd/3rd Generation Intel® Core™ i7/ i5/ i3 and Pentium® processor, Touch Screen, Wi-Fi, USB, Dual GbE LAN , RS-232/422/485, 2M pixels Camera, HD Audio and RoHS Us e r Ma n u a l Us e r Ma n u a l Page I Re v.
  • Page 2 AFL2-17AB-H61 Re vis io n Date Version Changes 9 December, 2016 1.30 Updated for R13 25 April, 2014 1.23 Update Section 5.13.2: Panel Mounting 24 July, 2013 1.22 Update the Note for CPU temperature alert LED in Section 1.2.1.1: LED Indicators 14 May, 2013 1.21...
  • Page 3 AFL2-17AB-H61 Co p yrig h t COP YRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
  • Page 4 AFL2-17AB-H61 Ma n u a l Co n ve n tio n s WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product.

  • Page 5: Table Of Contents

    AFL2-17AB-H61 Ta b le o f Co n te n ts 1 INTRODUCTION ......................1 1.1 O ........................2 VERVIEW 1.1.1 Model Variations ....................3 1.1.2 Features ......................3 1.1.3 Light Fanless Technology Design ..............4 1.2 F ......................5 RONT ANEL 1.2.1.1 LED Indicators ....................
  • Page 6 AFL2-17AB-H61 3.1.1 Packing List ..................... 20 3.2 O ....................... 21 PTIONAL TEMS 4 INSTALLATION ......................24 4.1 A ..................25 STATIC RECAUTIONS 4.2 I ..................25 NSTALLATION RECAUTIONS 4.3 I ..............26 NSTALLATION AND ONFIGURATION TEPS 4.4 HDD I ....................26 NSTALLATION 4.5 K-T ............
  • Page 7 AFL2-17AB-H61 5.2 I ................. 58 NTERNAL ERIPHERAL ONNECTORS 5.2.1 Auto-Dimming Connector ................58 5.2.2 Battery Connector .................... 59 5.2.3 BIOS Programming Connector ................ 60 5.2.4 Bluetooth Connector ..................61 5.2.5 CPU Fan Connector ..................61 5.2.6 DDR3 SO-DIMM Slots ..................62 5.2.7 Debug Port Connector ..................
  • Page 8 AFL2-17AB-H61 6 SYSTEM MAINTENANCE ..................91 6.1 S ..............92 YSTEM AINTENANCE NTRODUCTION 6.2 A ..................92 STATIC RECAUTIONS 6.3 T ....................93 URN OFF THE OWER 6.4 O ....................93 PENING THE YSTEM 6.4.1 Removing the Back Cover ................93 6.4.2 Removing the Internal Aluminum Cover ............
  • Page 9 AFL2-17AB-H61 7.5.1 Northbridge Configuration ................124 7.5.2 Southbridge Configuration ................125 7.5.3 Integrated Graphics ..................129 7.5.4 ME Subsystem ....................130 7.6 B ........................132 7.7 S ........................ 134 ECURITY 7.8 S & E ......................135 8 COOLING MANAGEMENT CONSOLE (ICMC) ............ 137 8.1 O .......................
  • Page 10 AFL2-17AB-H61 Lis t o f Fig u re s Figure 1-1: AFL2-17AB-H61 Flat Bezel Panel PC ................ 2 Figure 1-2: AFL2-17AB-H61 Front View ..................5 Figure 1-3: LED Indicators ......................5 Figure 1-4: Function Keys ......................7 Figure 1-5: AFL2-17AB-H61 Rear View ..................8 Figure 1-6: AFL2-17AB-H61 Bottom Panel ...................
  • Page 11 AFL2-17AB-H61 Figure 4-17: Chassis Support Screws ..................39 Figure 4-18: Secure the Panel PC ....................39 Figure 4-19: Cutout Dimensions ....................40 Figure 4-20: Tighten the Panel Mounting Clamp Screws ............41 Figure 4-21: Mounting screw location ..................42 Figure 4-22: Stand Mounting .......................42 Figure 4-23: Arm Mounting Retention Screw Holes ..............43 Figure 4-24: Arm Mounting ......................44 Figure 4-25: Audio Connector .....................45 Figure 4-26: HDMI Connection ....................46...
  • Page 12 AFL2-17AB-H61 Figure 5-22: LOGO LED Connector Location ................76 Figure 5-23: Mini USB Connector Location (MINUSB2) ............77 Figure 5-24: Mini USB Connector Location (MINUSB1) ............77 Figure 5-25: PCIe Mini Card Slot Location .................78 Figure 5-26: Power Button Connector Location ................79 Figure 5-27: RFID Connector Location ..................80 Figure 5-28: SATA 3Gb/s Drive Connector Location ..............81 Figure 5-29: SATA Power Connector Locations ...............82 Figure 5-30: Speaker Connector Location .................83...
  • Page 13 AFL2-17AB-H61 Lis t o f Ta b le s Table 1-1: AFL2-17AB-H61 Model Variations ................3 Table 1-2: LED Indicators ......................6 Table 1-3: Function Key Descriptions ..................8 Table 1-4: System Specifications ....................12 Table 4-1: HDMI Pinouts ......................47 Table 4-2: LAN1 Pinouts ......................48 Table 4-3: LAN2 Pinouts ......................48 Table 4-4: RS-232 Serial Ports Pinouts (COM1, COM2) ............50 Table 4-5: RS-422/485 Serial Port Pinouts (COM3) ..............50...
  • Page 14 AFL2-17AB-H61 Table 5-19: LOGO LED Connector Pinouts ................76 Table 5-20: Mini USB Connector Pinouts (MINUSB2) ...............77 Table 5-21: Mini USB Connector Pinouts (MINUSB1) ...............78 Table 5-22: Power Button Connector Pinouts ................79 Table 5-23: RFID Connector Pinouts ..................80 Table 5-24: SATA 3Gb/s Drive Connector Pinouts ..............81 Table 5-25: SATA Power Connector Pinouts ................82 Table 5-26: Speaker Connector Pinouts ..................83 Table 5-27: Touch Panel Connector Pinouts ................84...
  • Page 16 AFL2-17AB-H61 Lis t o f BIOS Me n u s BIOS Menu 1: Main ........................103 BIOS Menu 2: Advanced ......................105 BIOS Menu 3: ACPI Configuration ....................105 BIOS Menu 4: RTC Wake Settings ....................106 BIOS Menu 5: TPM Configuration .....................108 BIOS Menu 6: CPU Configuration .....................109 BIOS Menu 7: CPU Configuration .....................110 BIOS Menu 8: IDE Configuration ....................111 BIOS Menu 9: Intel TXT(LT) Configuration ................112...

  • Page 17: Introduction

    AFL2-17AB-H61 Chapter In tro d u c tio n P a g e 1...

  • Page 18: Overview

    AFL2-17AB-H61 1.1 Ove rvie w Figure 1-1: AFL2-17AB-H61 Flat Bezel Panel PC The AFL2-17AB-H61 is a 2nd/3rd generation Intel® Core™ i7/ i5/ i3 and Pentium® processor powered flat bezel panel PC with a rich variety of functions and peripherals. The AFL2-17AB-H61 is designed for easy and simplified integration into kiosk and point-of-sales (POS) applications.

  • Page 19: Model Variations

    AFL2-17AB-H61 1.1.1 Mo d e l Va ria tio n s The model variations of the AFL2-17AB-H61 Series are listed below. Model No. Touch Screen Intel® Core™ i5 Dual Core 2xxxT CPU AFL2-17AB-H61-i5/R-R13 Resistive Touch (Above 2.7GHz), TDP 35W Intel® Core™ i3 Dual Core 2xxxT CPU...

  • Page 20: Light Fanless Technology Design

    1.1.3 Lig h t Fa n le s s Te c h n o lo g y De s ig n AFL2-17AB-H61 series panel PCs are designed with light fanless technology. The light fanless technology utilizes K-type thermocouple temperature sensor to detect environment temperature and control fan operation, enhancing system stability and remote environment control.

  • Page 21: Front Panel

    1.2 Fro n t P a n e l The front side of the AFL2-17AB-H61 is a flat bezel panel TFT LCD screen surrounded by a PC/ABS plastic frame. The LED light bars are for AFL2-17AB-H61 series only. Figure 1-2: AFL2-17AB-H61 Front View 1.2.1.1 LED In d ic a to rs...

  • Page 22: Table 1-2: Led Indicators

    AFL2-17AB-H61 LED In d ic a to r De s c rip tio n Shows power status. Power Orange: Standby mode. Blue: Power-on mode. AT/ATX Mode Shows the power mode status. Controlled by the AT/ATX power mode switch. Blue: CPU temperature is normal. CPU Temperature Alert Red: CPU temperature is too high.

  • Page 23: Function Keys

    AFL2-17AB-H61 NOTE: The CPU temperature alert LED shows in red when the CPU temperature reaches 80ºC. If the CPU temperature alert LED shows in red, the user must lower the environments temperature or close some running applications to cool down the CPU. 1.2.1.2 Fu n c tio n Ke ys The corresponding Function Keys are located under the bottom right hand corner of the LCD screen (Figure 1-4).

  • Page 24: Rear Panel

    AFL2-17AB-H61 Ke y Co m b in a tio n Fu n c tio n Ke y De s c rip tio n Power On/Off Fn + Brightness Up Note: To power on the system, hold down the Fn + Brightness Up buttons for 3 seconds.

  • Page 25: Left Side Panel

    AFL2-17AB-H61  1 x 9V ~ 36V DC power jack  6 x Function keys  1 x HDMI port  1 x K-type connector  1 x Power button  1 x Reset button  1 x RJ-45 LAN connector ...

  • Page 26: Right Side Panel

    AFL2-17AB-H61  2 x Audio jacks (Line out, MIC)  1 x RJ-45 LAN connector  1 x USB 2.0 connector Figure 1-7: AFL2-17AB-H61 Left Side Panel 1.6 Rig h t S id e P a n e l The right side panel of the AFL2-17AB-H61 provides access to the CD-ROM (optional) (Figure 1-8): Figure 1-8: AFL2-17AB-H61 Right Side Panel 1.7 S ys te m Sp e c ific a tio n s...
  • Page 27 AFL2-17AB-H61 Max. Resolution 1280 (W) x 1024 (H) Brightness (cd/m Contrast Ratio 1000:1 LCD Color 16.7M Pixel Pitch (H x V) (mm) 0.264(H) x 0.264 (V) Viewing Angle (H-V) 170° / 170° Backlight MTBF (hr) 50,000 (LED backlight) Touch Screen 5-wire resistive type with RS-232 interface (selected models only) projected capacitive type with USB interface (selected models only) Touch Controller...

  • Page 28: Table 1-4: System Specifications

    AFL2-17AB-H61 Storage Temperature -20ºC ~ 60ºC Humidity 10% to 95% (non-condensing) IP level IP 64 compliant front panel Power Supply 120W power adapter Input: 100V AC ~ 240V AC @ 50 / 60 Hz Output: 19V DC Power Requirement 9V ~ 36V DC Power Consumption 19V@5.3A (Intel®...

  • Page 29: Detailed Specifications

    AFL2-17AB-H61 Chapter De ta ile d S p e c ific a tio n s P a g e 13...

  • Page 30: Dimensions

    AFL2-17AB-H61 2.1 Dim e n s io n s The AFL2-17AB-H61 dimensions are shown below.  Width: 418.0 mm  Height: 378.0 mm  Depth: 65.0 mm Figure 2-1: AFL2-17AB-H61 Dimensions (mm) P a g e 14...

  • Page 31: Intel ® Core ™ Desktop Processor

    AFL2-17AB-H61 2.2 In te l® Co re ™ De s kto p P ro c e s s or An Intel® 2nd/3rd generation Core™ i7/i5/i3 or Pentium® processor is installed in the system. The Intel® mobile processor interfaces with the H61 chipset through a Direct Media Interface (DMI) and a Flexible Display Interface (FDI).

  • Page 32: Lan Connectivity

    AFL2-17AB-H61 Figure 2-2: Serial Ports 2.4.2 LAN Co n n e c tivity The AFL2-17AB-H61 has one RJ-45 LAN connector on the bottom panel and one RJ-45 LAN connector on the left side panel. Figure 2-3: RJ-45 Ethernet Connector (Bottom Panel) P a g e 16...

  • Page 33: External Usb Connectors

    AFL2-17AB-H61 Figure 2-4: RJ-45 Ethernet Connector (Left Side Panel) The PCIe LAN from the Intel® H61 chipset of the AFL2-17AB-H61 is interfaced to the Realtek RTL8111E PCIe gigabit Ethernet (GbE) controllers. The RTL8111E controllers are connected directly to the RJ-45 connectors and provide external GbE connectivity. 2.4.3 Exte rn a l US B Co n n e c to rs There are two USB 2.0 connectors and two USB 3.0 connectors on the bottom panel and one USB 2.0 connector on the left side panel of the AFL2-17AB-H61.

  • Page 34: Audio

    AFL2-17AB-H61 Figure 2-6: External USB Ports (Left Side Panel) 2.5 Au d io 2.5.1 Au d io Co d e c Co n tro lle r The integrated HD Audio compliant audio controller on the Intel® H61 PCH is integrated to a Realtek ALC892 audio codec.

  • Page 35: Unpacking

    AFL2-17AB-H61 Chapter Un p a c kin g P a g e 19...

  • Page 36: Unpacking

    AFL2-17AB-H61 3.1 Un pa c kin g To unpack the flat bezel panel PC, follow the steps below: WARNING! The front side LCD screen has a protective plastic cover stuck to the screen. Only remove the plastic cover after the flat bezel panel PC has been properly installed.

  • Page 37: Optional Items

    AFL2-17AB-H61 Power adapter (P/N: 63000-FSP120AAB-RS) Power cord (P/N: 32702-000401-100-RS) Power transfer cord (P/N: 32000-089400-RS) Infrared remote controller (P/N: 7Z000-SLPCB005-RS) IO bracket (P/N: 41013-0290C2-00-RS) Temperature sensor cable (P/N: 32133-004300-100-RS) (P/N: 43125-0002C0-00-RS) M3 screw pack (P/N: 44013-030041-RS) M4 screw pack (P/N: 44033-040061-RS) Utility CD (P/N: 7B000-000956-RS) One Key Recovery CD...
  • Page 38 AFL2-17AB-H61 Ite m Im a g e Panel Mounting Kit (P/N: AFL2PK-17A) Wall mounting kit (P/N: AFLWK-19B) Rack Mounting Kit (P/N: AFL2RK-17A) (P/N: ARM-31-RS) Stand (P/N: STAND-A19-RS/STAND-A21-R10/STAND-C19-R10) Magnetic Stripe Reader (P/N: AFL2P-12AMSR-U-R10) Slim DVD Burner (P/N: AFL2-DVD-KIT01-R10) Trusted Platform Module (TPM) (P/N: TPM-IN01-R11) P a g e 22...
  • Page 39 AFL2-17AB-H61 EM RFID Reader (P/N: AFL2-EM-RFID-KIT01-R10) Mifare RFID Reader (P/N: AFL2-MF-RFID-KIT01-R11) OS: Win 7 Embedded (DVD-ROM) (P/N: AFL2-17A-H61-WES7P-R13 (for Projected Capacitive Touch) AFL2-17A-H61-WES7E-R13 (for Resistive Touch) If any of these items are missing or damaged, contact the distributor or sales representative immediately.

  • Page 40: Installation

    AFL2-17AB-H61 Chapter In s ta lla tio n P a g e 24...

  • Page 41: Anti - Static Precautions

    AFL2-17AB-H61 4.1 An ti-s ta tic P re c a u tio n s WARNING: Failure to take ESD precautions during the maintenance of the AFL2-17AB-H61 result permanent damage AFL2-17AB-H61 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the AFL2-17AB-H61.

  • Page 42: Installation And Configuration Steps

    AFL2-17AB-H61  Anti-static Discharge: If a user open the rear panel of the flat bezel panel PC, to configure the jumpers or plug in added peripheral devices, ground themselves first and wear and anti-static wristband. 4.3 In s ta lla tio n a n d Co n fig u ra tio n Ste ps The following installation steps must be followed.

  • Page 43: Figure 4-1: Hdd Cover Retention Screws

    AFL2-17AB-H61 Figure 4-1: HDD Cover Retention Screws S te p 2: Remove the HDD cover from the device. Loosen the captive screw to release the HDD bracket from the chassis (Figure S te p 3: 4-2). Figure 4-2: HDD Bracket Screw P a g e 27...

  • Page 44: Figure 4-3: Removing The Hdd Bracket

    AFL2-17AB-H61 Slide the HDD bracket out of the device as shown (Figure 4-3). S te p 4: Figure 4-3: Removing the HDD Bracket Insert an HDD into the bracket as shown (Figure 4-4). S te p 5: Figure 4-4: Inserting the HDD P a g e 28...

  • Page 45: K-Type Temperature Sensor Installation

    AFL2-17AB-H61 S te p 6: Secure the HDD to the bracket using four (4) retention screws (two screws on each side) (Figure 4-5). Figure 4-5: Securing the HDD Slide the HDD module back into the device. S te p 7: Tighten the captive screw.

  • Page 46: Rfid Reader (Optional )

    4.6 RFID Re a d e r (Op tio n a l) The AFL2-17AB-H61 series (selected models only) supports RFID reader function. The RFID reader is located at the bottom of the screen. An optional Mifare 13.56 MHz or EM 125 KHz RFID reader can be integrated in the system.

  • Page 47: Dvd-Rom Installation (Optional )

    AFL2-17AB-H61 S te p 2: Connect the RFID connector of the RFID USB cable to the RFID connector on the motherboard (RFID_USB1). Attach the sticker of the RFID module to the bottom of the panel. S te p 3: Figure 4-8: Install the RFID module S te p 4: Secure the RFID module to the motherboard using two retention screws on either side.

  • Page 48: Figure 4-9: Dvd-Rom Cover

    AFL2-17AB-H61 Figure 4-9: DVD-ROM Cover Remove the DVD-ROM cover. S te p 2: S te p 3: Insert the DVD-ROM to the DVD-ROM bay. Attach the SATA cable to the DVD-ROM and fasten the SATA cable screws (Figure 4-10). Figure 4-10: Install the DVD-ROM P a g e 32...

  • Page 49: At/Atx Mode Selection

    AFL2-17AB-H61 S te p 4: Secure the DVD-ROM to the DVD-ROM bracket using four screws (two screws on each side) (Figure 4-11). Figure 4-11: DVD-ROM Bracket Screws Install the new DVD-ROM cover and fasten four screws on the DVD-ROM cover. S te p 5: The new DVD-ROM cover can be found in the packing list and is shown in Figure 4-12.

  • Page 50: At Power Mode

    AFL2-17AB-H61 Figure 4-13: AT/ATX Switch Location Adjust the AT/ATX switch. S te p 2: S te p 0: 4.8.1 AT P owe r Mo d e With the AT mode selected, the power is controlled by a central power unit rather than a power switch.

  • Page 51: Reset The System

    AFL2-17AB-H61 clear CMOS switch to clear CMOS mode for a few seconds then reinstall the clear CMOS switch back to keep CMOS mode. S te p 1: Locate the clear CMOS switch on the bottom panel (Figure 4-14). Figure 4-14: Clear CMOS Switch Location Adjust the clear CMOS switch.

  • Page 52: Powering Off The System

    AFL2-17AB-H61 Hold down the Function and Brightness Up buttons for three seconds to power S te p 2: on the system. S te p 0: 4.12 P owe rin g Off th e S ys te m To power off the system, follow the steps below: Locate the Function and Brightness Up function keys.

  • Page 53: Figure 4-16: Wall-Mounting Bracket

    AFL2-17AB-H61 S te p 3: Drill four pilot holes at the marked locations on the wall for the bracket retention screws. Align the wall-mounting bracket screw holes with the pilot holes. S te p 4: S te p 5: Secure the mounting-bracket to the wall by inserting the retention screws into the four pilot holes and tightening them (Figure 4-16).
  • Page 54 AFL2-17AB-H61 S te p 6: Insert the four monitor mounting screws provided in the wall mount kit into the four screw holes on the real panel of the flat bezel panel PC and tighten until the screw shank is secured against the rear panel (Figure 4-17). WARNING: Please use the M4 screws provided in the wall mount kit for the rear panel.

  • Page 55: Figure 4-17: Chassis Support Screws

    AFL2-17AB-H61 Figure 4-17: Chassis Support Screws S te p 9: Secure the panel PC by fastening the retention screw of the wall-mounting bracket. (Figure 4-18). S te p 0: Figure 4-18: Secure the Panel PC P a g e 39...

  • Page 56: Panel Mounting

    AFL2-17AB-H61 4.13.2 P a n e l Mo u n tin g To mount the AFL2-17AB-H61 flat bezel panel PC into a panel, please follow the steps below. S te p 1: Select the position on the panel to mount the flat bezel panel PC. S te p 2: Cut out a section corresponding to the size shown below.

  • Page 57: Stand Mounting

    AFL2-17AB-H61 S te p 8: Install the covers into the panel mounting bracket. Each mounting bracket  includes two side covers and one top cover (Figure 4-20 Figure 4-20: Tighten the Panel Mounting Clamp Screws 4.13.3 Sta n d Mo u n tin g To mount the AFL2-17AB-H61 using the stand mounting kit, please follow the steps below.

  • Page 58: Figure 4-21: Mounting Screw Location

    AFL2-17AB-H61 Figure 4-21: Mounting screw location S te p 2: Align the bracket with the screw holes. S te p 3: To secure the bracket to the AFL2-17AB-H61, insert the retention screws into the screw holes and tighten them. Figure 4-22: Stand Mounting P a g e 42...

  • Page 59: Arm Mounting

    AFL2-17AB-H61 4.13.4 Arm Mo u n tin g The AFL2-17AB-H61 is VESA (Video Electronics Standards Association) compliant and can be mounted on an arm with a 100mm interface pad. To mount the AFL2-17AB-H61 on an arm, please follow the steps below. S te p 1: The arm is a separately purchased item.

  • Page 60: External Peripheral Device Connection

    AFL2-17AB-H61 S te p 4: Secure the flat bezel panel PC to the interface pad by inserting four retention screws through the bottom of the mounting arm interface pad and into the flat bezel panel PC. Figure 4-24: Arm Mounting 4.14 Exte rn a l P e rip h e ra l De vic e Co n n e c tio n The following external peripheral devices can be connected to the external peripheral interface connectors.

  • Page 61: Audio Connection

    AFL2-17AB-H61 4.14.1 Au d io Co n n e c tio n The audio jacks on the external audio connector enable the AFL2-17AB-H61 to be connected to a stereo sound setup. To install the audio devices, follow the steps below. S te p 1: Identify the audio plugs.

  • Page 62: Figure 4-26: Hdmi Connection

    AFL2-17AB-H61 Locate the HDMI connector. The location is shown in Chapter 1. S te p 1: Align the connector. Align the HDMI connector with the HDMI port. Make sure S te p 2: the orientation of the connector is correct. Figure 4-26: HDMI Connection S te p 3: Insert the HDMI connector.

  • Page 63: Lan Connection

    AFL2-17AB-H61 Description Description +5V_HDMI HDMI_HPD Table 4-1: HDMI Pinouts 4.14.3 LAN Co n n e c tio n There are two external RJ-45 LAN connectors. The RJ-45 connector enables connection to an external network. To connect a LAN cable with an RJ-45 connector, please follow the instructions below.

  • Page 64: Serial Device Connection

    AFL2-17AB-H61 The pinouts of the RJ-45 LAN connectors are shown below. Description Description LAN1_MDI0+ LAN1_MDI0- LAN1_MDI1+ LAN1_MDI1- LAN1_MDI2+ LAN1_MDI2- LAN1_MDI3+ LAN1_MDI3- LAN1_LINK100 LAN1_LINK1000 LAN1_ACT-1 POWER Table 4-2: LAN1 Pinouts Description Description LAN2_MDI0+ LAN2_MDI0- LAN2_MDI1+ LAN2_MDI1- LAN12_MDI2+ LAN2_MDI2- LAN2_MDI3+ LAN2_MDI3- LAN12_LINK100 LAN2_LINK1000 LAN2_ACT-1 POWER...

  • Page 65: Figure 4-28: Db-9 Serial Port Connector

    AFL2-17AB-H61 Insert the serial connector. Insert the DB-9 connector of a serial device into S te p 2: the DB-9 connector on the bottom panel. See Figure 4-28. Figure 4-28: DB-9 Serial Port Connector S te p 3: Secure the connector. Secure the serial device connector to the external interface by tightening the two retention screws on either side of the connector.

  • Page 66: Usb Device Connection

    AFL2-17AB-H61 Description Description NCTS2 XRI2 Table 4-4: RS-232 Serial Ports Pinouts (COM1, COM2) The pinouts of the RS-422/485 serial ports are shown below. Description Description RXD485+ RXD485# TXD485+ TXD485# Table 4-5: RS-422/485 Serial Port Pinouts (COM3) 4.14.5 US B De vic e Co n n e c tio n NOTE: User must install the USB 3.0 driver before connecting a USB device to the system or else the system may not recognize the connected...

  • Page 67: Figure 4-29: Usb Device Connection

    AFL2-17AB-H61 Figure 4-29: USB Device Connection S te p 3: Insert the device connector. Once aligned, gently insert the USB device connector into the onboard connector. S te p 0: The pinouts of the USB 2.0 connectors are shown below. Description Description POWER...

  • Page 68: Vga Monitor Connection

    AFL2-17AB-H61 Description Description USB3_PWR1 USB2P0_DM1_L USB2P0_DP1_L USB3P0_RXDN1_L USB3P0_RXDP1_L USB3P0_TXDN1_C_L USB3P0_TXDP1_C_L USB3_PWR2 USB2P0_DM2_L USB2P0_DP2_L USB3P0_RXDN2_L USB3P0_RXDP2_L USB3P0_TXDN2_C_L USB3P0_TXDP2_C_L Table 4-8: USB 3.0 connectors Pinouts 4.14.6 VGA Mo n ito r Co n n e c tio n The AFL2-17AB-H61 has a single female DB-15 connector on the external peripheral interface panel.

  • Page 69: Figure 4-30: Vga Connector

    AFL2-17AB-H61 Figure 4-30: VGA Connector Secure the connector. Secure the DB-15 VGA connector from the VGA S te p 4: monitor to the external interface by tightening the two retention screws on either side of the connector. The pinouts of the VGA connector is shown below. Description Description CRT_RED...

  • Page 70: System Motherboard

    AFL2-17AB-H61 Ch a p te r S ys te m Mo th e rb o a rd P a g e 54...

  • Page 71: Overview

    AFL2-17AB-H61 5.1 Ove rvie w This chapter details all the jumpers and connectors of the system motherboard. 5.1.1 La yo u t The figures below show all the connectors and jumpers of the system motherboard.. Figure 5-1: Connectors and Jumpers (front) P a g e 55...

  • Page 72: Peripheral Interface Connectors

    AFL2-17AB-H61 Figure 5-2: Connectors and Jumpers (rear) 5.1.2 P e rip h e ra l In te rfa c e Co n n e c to rs The table below lists all the connectors on the board. Co n n e c to r Typ e La b e l Auto-dimming connector...
  • Page 73 AFL2-17AB-H61 Co n n e c to r Typ e La b e l EC debug connector 18-pin header CN15 EC programming connector 6-pin wafer JSPI2 Hotkey connector 9-pin wafer HOTKEYCN1 Hotkey LED connector 8-pin wafer HOTKEYLEDCN1 JSATA connector 20-pin connector JSATA3 K type thermocouple connector 2-pin wafer...

  • Page 74: Internal Peripheral Connectors

    AFL2-17AB-H61 Co n n e c to r Typ e La b e l LCD backlight button button DSW1 Reset button button RST1 Table 5-1: Peripheral Interface Connectors 5.2 In te rn a l P e rip h e ra l Co n n e c to rs The section describes all of the connectors on the AFL2-17AB-H61.

  • Page 75: Battery Connector

    AFL2-17AB-H61 PIN NO. DESCRIPTION PIN NO. DESCRIPTION VCC5DUAL VCC5DUAL IRRX GROUND AUTO_CLK AUTO_DATA GROUND Table 5-2: Auto-dimming Connector Pinouts 5.2.2 Ba tte ry Co n n e c to r CN La b e l: BAT2 CN Typ e : 2-pin wafer See Figure 5-4 CN Lo c a tio n :...

  • Page 76: Bios Programming Connector

    AFL2-17AB-H61 VBATT Table 5-3: Battery Connector Pinouts 5.2.3 BIOS P ro g ra m m in g Co n n e c to r CN La b e l: J S P I1 6-pin wafer CN Typ e : See Figure 5-5 CN Lo c a tio n : See Table 5-4 CN P in o u ts :...

  • Page 77: Bluetooth Connector

    AFL2-17AB-H61 5.2.4 Blu e to o th Co n n e c to r CN La b e l: BLUETOOTH1 4-pin wafer CN Typ e : CN Lo c a tio n : See Figure 5-6 CN P in o u ts : See Table 5-5 The Bluetooth connector connects to a Bluetooth module.

  • Page 78: Ddr3 So-Dimm Slots

    AFL2-17AB-H61 CN P in o u ts : See Table 5-6 The fan connector attaches to a CPU cooling fan. Figure 5-7: CPU Fan Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION +V12S FANIN1 +V3.3S Table 5-6: CPU Fan Connector Pinouts 5.2.6 DDR3 S O-DIMM S lo ts CN La b e l: DIMM1, DIMM2...

  • Page 79: Debug Port Connector

    AFL2-17AB-H61 Figure 5-8: DDR3 DIMM Slot Locations 5.2.7 De b u g P o rt Co n n e c to r CN La b e l: DEBUGCN1 CN Typ e : 9-pin header See Figure 5-9 CN Lo c a tio n : See Table 5-7 CN P in o u ts : The debug port connector is for system debug.

  • Page 80: Digital Microphone Connector

    AFL2-17AB-H61 PIN NO. DESCRIPTION PIN NO. DESCRIPTION BUF_PLT_RST# FIN_CLK LPC_AD3 LPC_AD2 LPC_AD1 LPC_AD0 LPC_FRAME# Table 5-7: Debug Port Connector Pinouts 5.2.8 Dig ita l Mic ro p h o n e Co n n e c to r CN La b e l: DMIC1 CN Typ e : 4-pin wafer...

  • Page 81: Ec Debug Connector

    AFL2-17AB-H61 PIN NO. DESCRIPTION PIN NO. DESCRIPTION DMIC_CLK DMIC_DATA VCC3 Table 5-8: Digital Microphone Connector Pinouts 5.2.9 EC De b u g Co n n e c to r CN15 CN La b e l: 18-pin header CN Typ e : CN Lo c a tio n : See Figure 5-11 CN P in o u ts :...

  • Page 82: Ec Programming Connector

    AFL2-17AB-H61 PIN NO. DESCRIPTION PIN NO. DESCRIPTION EC_EPP_PD6 EC_EPP_PE EC_EPP_PD7 EC_EPP_SLCT Table 5-9: Debug Port Connector Pinouts 5.2.10 EC P ro g ra m m in g Con n e c to r CN La b e l: J S P I2 6-pin header CN Typ e : CN Lo c a tio n :...

  • Page 83: Hotkey Connector

    AFL2-17AB-H61 5.2.11 Ho tke y Co n n e c to r CN La b e l: HOTKEYCN1 9-pin wafer CN Typ e : CN Lo c a tio n : See Figure 5-13 CN P in o u ts : See Table 5-11 The hotkey connector connects to the hotkeys on the bottom panel.

  • Page 84: Jsata Connector

    AFL2-17AB-H61 CN Typ e : 8-pin wafer CN Lo c a tio n : See Figure 5-14 See Table 5-12 CN P in o u ts : The hotkey LED connector connects to the hotkey LEDs on the front panel. Figure 5-14: Hotkey LED Connector Location PIN NO.

  • Page 85: K Type Thermocouple Connector

    AFL2-17AB-H61 The JSATA connector connects to the SATA rigid-flex board. Figure 5-15: JSATA Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION +V12S +V12S +V5S SATA20_PRX_C_DTX_P3 +V5S SATA20_PRX_C_DTX_N3 +V5S +V5S SATA20_PRX_C_DRX_P3 SATA20_PRX_C_DRX_N3 +V3.3S +V3.3S Table 5-13: JSATA Connector Pinouts 5.2.14 K Typ e Th e rm o c o u p le Co n n e c to r CN La b e l: CN13, CN14 2-pin wafer...

  • Page 86: Figure 5-16: K Type Thermocouple Connector Location

    AFL2-17AB-H61 CN Lo c a tio n : See Figure 5-16 CN P in o u ts : See Table 5-14 The K type thermocouple connector connects to the K type thermocouple. CN13 connects to the temperature sensor and CN14 connects to the K-type connector on the bottom panel.

  • Page 87: Lvds Connector

    AFL2-17AB-H61 PIN NO. DESCRIPTION PIN NO. DESCRIPTION D1-/D2- D1+/D2+ Table 5-14: K Type Thermocouple Connector Pinouts 5.2.15 LVDS Co n n e c to r CN La b e l: LVDS 1 30-pin crimp CN Typ e : See Figure 5-18 CN Lo c a tio n : CN P in o u ts : See Table 5-15...

  • Page 88: Lvds Backlight Inverter Connector

    AFL2-17AB-H61 CLK1P_C CLK1M_C A3P_C A3M_C A4P_C A4M_C A5P_C A5M_C A6P_C A6M_C CLK2P_C CLK2M_C A7P_C A7M_C Table 5-15: LVDS Connector Pinouts 5.2.16 LVDS Ba c klig h t In ve rte r Co n n e c to r CN La b e l: INVERTER1 6-pin wafer CN Typ e :...

  • Page 89: Led Connector

    AFL2-17AB-H61 Figure 5-19: LVDS Backlight Inverter Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION BKL_POWER BKL_POWER ENABKL BRIGHTNESS Table 5-16: LVDS Backlight Inverter Connector Pinouts 5.2.17 LED Co n n e c to r CN La b e l: LEDCN1 16-pin header CN Typ e : See Figure 5-20...

  • Page 90: Light Bar Connectors

    AFL2-17AB-H61 Figure 5-20: LED Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION AUDIO_LED# PWRLED01# MIC_LED# PWRLED02# CPU_LED02# AT_LED# CPU_LED01# ATX_LED# AD_LED# +V3.3S WiFi_LED# +V3.3S BT_LED# +V3.3A_EC VCC_RFID GROUND Table 5-17: LED Connector Pinouts 5.2.18 Lig h t Ba r Co n n e c to rs CN La b e l: CN1, CN2, CN3, CN4 6-pin wafer...

  • Page 91: Logo Led Connector

    AFL2-17AB-H61 The Light bar connectors connect to the LED bar module. Figure 5-21: LED Bar Connectors Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION SMBCLK_MAIN SMBDATA_MAIN +V5S Table 5-18: LED Bar Connectors Pinouts 5.2.19 LOGO LED Co n n e c tor CN La b e l: LOGO_LED 2-pin wafer...

  • Page 92: Mini Usb Connector

    AFL2-17AB-H61 Figure 5-22: LOGO LED Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION +V3.3S Table 5-19: LOGO LED Connector Pinouts 5.2.20 Min i US B Co n n e c to r CN La b e l: MINUS B1, MINUS B2 CN Typ e : 4-pin wafer See Figure 4-21, Figure 5-24...

  • Page 93: Figure 5-23: Mini Usb Connector Location (Minusb2)

    AFL2-17AB-H61 Figure 5-23: Mini USB Connector Location (MINUSB2) Figure 5-24: Mini USB Connector Location (MINUSB1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION -DATA4 +DATA4 Table 5-20: Mini USB Connector Pinouts (MINUSB2) P a g e 77...

  • Page 94: Pcie Mini Card Slot

    AFL2-17AB-H61 PIN NO. DESCRIPTION PIN NO. DESCRIPTION -DATA8 +DATA8 3VCC Table 5-21: Mini USB Connector Pinouts (MINUSB1) 5.2.21 P CIe Min i Ca rd S lo t CN La b e l: MINI_P CIE1, MINI_P CIE2 PCIe Mini card slot CN Typ e : See Figure 5-25 CN Lo c a tio n :...

  • Page 95: Power Button Connector

    AFL2-17AB-H61 5.2.22 P owe r Bu tto n Co n n e c to r CN La b e l: P W_BT1 2-pin wafer CN Typ e : CN Lo c a tio n : See Figure 5-26 CN P in o u ts : See Table 5-22 The power button connector connects to the power button on the bottom panel.

  • Page 96: Sata 3Gb/S Drive Connectors

    AFL2-17AB-H61 The RFID connector connects to a RFID module. Figure 5-27: RFID Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION -DATA5 +DATA5 Table 5-23: RFID Connector Pinouts 5.2.24 S ATA 3Gb /s Drive Co n n e c to rs CN La b e l: S ATA1 7-pin SATA connector...

  • Page 97: Sata Power Connector

    AFL2-17AB-H61 Figure 5-28: SATA 3Gb/s Drive Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION SATA20_PTX_P0 SATA20_PTX_N0 SATA20_PRX_N0 SATA20_PRX_P0 Table 5-24: SATA 3Gb/s Drive Connector Pinouts 5.2.25 S ATA P o we r Co n n e c to r CN La b e l: CN Typ e : 2-pin wafer CN Lo c a tio n :...

  • Page 98: Speaker Connector

    AFL2-17AB-H61 Figure 5-29: SATA Power Connector Locations PIN NO. DESCRIPTION PIN NO. DESCRIPTION +V5S Table 5-25: SATA Power Connector Pinouts 5.2.26 S p e a ke r Co n n e c to r CN La b e l: S P K_CN13 4-pin wafer CN Typ e : CN Lo c a tio n :...

  • Page 99: Touch Panel Connector (5-Wire Resistive Type)

    AFL2-17AB-H61 Figure 5-30: Speaker Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION SPK_L Analog_GND Analog_GND SPK_R Table 5-26: Speaker Connector Pinouts 5.2.27 To u c h p a n e l c o n n e c to r (5-wire re s is tive typ e ) CN La b e l: TS 1 9-pin wafer...

  • Page 100: Touch Panel Connector (Projected Capacitive Type)

    AFL2-17AB-H61 Figure 5-31: Touch Panel Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION -DATA1 +DATA1 Table 5-27: Touch Panel Connector Pinouts 5.2.28 To u c h p a n e l c o n n e c to r (p ro je c te d c a pa c itive typ e ) CN La b e l: TOUCH1 4-pin wafer...

  • Page 101: Tpm Connector

    AFL2-17AB-H61 Figure 5-32: Touch Panel Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION SENSE Table 5-28: Touch Panel Connector Pinouts 5.2.29 TP M Co n n e c to r CN La b e l: TPM1 20-pin header CN Typ e : See Figure 5-33 CN Lo c a tio n : CN P in o u ts :...

  • Page 102: Web Camera Connector

    AFL2-17AB-H61 Figure 5-33: TPM Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION TPMPCLK LPC_FRAME# BUF_PLT_RST# +V5S LPC_AD3 LPC_AD2 +V3.3S LPC_AD1 LPC_AD0 SMBCLK_MAIN SMBDATA_MAIN +V3.3A INT_SERIRQ PM_CLKRUN# PM_SUS_STAT# SIO_DRQ#0 Table 5-29: TPM Connector Pinouts 5.2.30 We b Ca m e ra Co n n e c to r CN La b e l: WEBCAMER1 4-pin wafer...

  • Page 103: Figure 5-34: Web Camera Connector Location

    AFL2-17AB-H61 The web camera connector connects to the web camera on the front panel. Figure 5-34: Web Camera Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION -DATA10 +DATA10 Table 5-30: Web Camera Connector Pinouts P a g e 87...

  • Page 104: Jumper Settings

    AFL2-17AB-H61 5.3 J u m p e r S e ttin g s NOTE: A jumper is a metal bridge used to close an electrical circuit. It consists of two or three metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.

  • Page 105: Lcd Panel Selection

    AFL2-17AB-H61 PIN NO. DESCRIPTION Short 1-2 +3.3 V Short 2-3 +5 V (Default) Table 5-32: LVDS Voltage Selection Jumper Settings Figure 5-35: LVDS Voltage Selection Jumper Location 5.3.2 LCD pa n e l s e le c tio n DJ3, DJ4, DJ5, DJ6 J u m p e r La b e l: 3-pin header J u m p e r Typ e :...

  • Page 106: Figure 5-36: Lcd Panel Selection Jumper Location

    AFL2-17AB-H61 Figure 5-36: LCD panel Selection Jumper Location P a g e 90...

  • Page 107: System Maintenance

    AFL2-17AB-H61 Chapter S ys te m Ma in te n a n c e P a g e 91...

  • Page 108: System Maintenance Introduction

    AFL2-17AB-H61 6.1 S ys te m Ma in te n a n c e In tro d u c tio n If the components of the AFL2-17AB-H61 fail they must be replaced. Components that can be replaced include:  SO-DIMM module ...

  • Page 109: Turn Off The Power

    AFL2-17AB-H61 6.3 Tu rn o ff th e P owe r WARNING: Failing to turn off the system before opening it can cause permanent damage to the system and serious or fatal injury to the user. Before any maintenance procedures are carried out on the system, make sure the system is turned off.

  • Page 110: Removing The Internal Aluminum Cover

    AFL2-17AB-H61 Figure 6-1: Back Cover Retention Screws S te p 4: Carefully separate the back cover from the chassis and lift the cover clear of the device S te p 0: 6.4.2 Re m o vin g th e In te rn a l Alu m in u m Co ve r To remove the internal aluminum cover, follow the steps below.

  • Page 111: Replacing Components

    AFL2-17AB-H61 S te p 2: Lift the aluminum cover off the AFL2-17AB-H61. The internal parts will all be viewable. S te p 3: Figure 6-3: Internal Components 6.5 Re p la c in g Co m p o n e n ts 6.5.1 Me m o ry Mo d u le Re p la c e m e n t The flat bezel panel PC is preinstalled with two 2.0 GB DDR3 memory module.

  • Page 112: Wlan Card Replacement

    AFL2-17AB-H61 S te p 8: Install the new DDR3 memory module by pushing it into the socket at an angle (Figure 6-4). Gently pull the spring retainer clips of the SO-DIMM socket out and push the S te p 9: rear of the DDR memory module down (Figure 6-4).

  • Page 113: Figure 6-5: Removing The Antennas

    AFL2-17AB-H61 S te p 5: Locate the WLAN card. Disconnect the main and auxiliary antennas on the WLAN module (Figure 6-5). S te p 6: Figure 6-5: Removing the Antennas S te p 7: Push the two spring clips in to release the WLAN card. Figure 6-6: Releasing the WLAN Card S te p 8: Grasp the WLAN card by the edges and carefully pull it out of the socket (Figure...

  • Page 114: Figure 6-7: Removing The Wlan Card

    AFL2-17AB-H61 Figure 6-7: Removing the WLAN card Install a new WLAN card by inserting the card into the slot at an angle S te p 9: S te p 10: Push the WLAN card down until the spring retainer clips lock into place. S te p 11: Connect the main (1) and auxiliary (2) antennas.

  • Page 115: Reinstalling The Covers

    AFL2-17AB-H61 S te p 12: Replace the internal aluminum cover and secure it to the chassis using seven (7) retention screws. Replace the back cover and secure it using fourteen (14) previously removed S te p 13: retention screws. S te p 0: 6.6 Re in s ta llin g th e Co ve rs WARNING: Failing to reinstall the covers may result in permanent damage to the...

  • Page 116: Bios Setup

    AFL2-17AB-H61 Chapter BIOS S e tu p P a g e 100...

  • Page 117: Introduction

    AFL2-17AB-H61 P a n e l P C 7.1 In tro d u c tio n A licensed copy of the BIOS is preprogrammed into the ROM BIOS. The BIOS setup program allows users to modify the basic system configuration. This chapter describes how to access the BIOS setup program and the configuration options that may be changed.

  • Page 118: Getting Help

    AFL2-17AB-H61 P a n e l P C F2 key Load previous values. F3 key Load optimized defaults F4 key Save changes and Exit BIOS Esc key Main Menu – Quit and do not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu -- Exit current page and return to Main Menu Table 7-1: BIOS Navigation Keys 7.1.3 Ge ttin g He lp...

  • Page 119: Main

    AFL2-17AB-H61 P a n e l P C 7.2 Ma in The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset...

  • Page 120: Advanced

    AFL2-17AB-H61 P a n e l P C  iWDD Ve rs io n  The iWDD Version displays the current iWDD version. The fields in iWDD Version cannot be changed.  Me m o ry In fo rm a tio n The Memory Information lists a brief summary of the on-board memory.

  • Page 121: Acpi Settings

    AFL2-17AB-H61 P a n e l P C Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit > ACPI Settings System ACPI Parameters. > RTC Wake Settings > Trusted Computing > CPU Configuration >...

  • Page 122: Rtc Wake Settings

    AFL2-17AB-H61 P a n e l P C  ACP I S le e p Sta te [S 1 (CP U Sto p Clo c k)] Use the ACPI Sleep State option to specify the sleep state the system enters when it is not being used.

  • Page 123: Trusted Computing

    AFL2-17AB-H61 P a n e l P C Use the Wake system with Fixed Time option to enable or disable the system wake on alarm event.  Disabled The real time clock (RTC) cannot generate a wake EFAULT event  Enabled If selected, the Wake up every day option appears allowing you to enable to disable the system to wake...

  • Page 124: Cpu Configuration

    AFL2-17AB-H61 P a n e l P C Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced TPM Configuration Enables or Disables TPM TPM SUPPORT [Disable] support. O.S. will not show TPM. Reset of Current TPM Status Information platform is required.

  • Page 125: Cpu Information

    AFL2-17AB-H61 P a n e l P C Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced CPU Configuration Socket specific CPU Information > CPU Information Hyper-threading [Enabled] ---------------------- Active Processor Cores [All] : Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.
  • Page 126 AFL2-17AB-H61 P a n e l P C Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced CPU Information Intel(R) Core(TM) i3-2100T CPU @ 2.50GHz CPU Signature 206a7 ---------------------- Microcode Patch Max CPU Speed 2500 MHz : Select Screen Min CPU Speed 1600 MHz ↑...

  • Page 127: Sata Configuration

    AFL2-17AB-H61 P a n e l P C 7.3.5 S ATA Co n fig u ra tio n Use the SATA Configuration menu (BIOS Menu 8) to change and/or set the configuration of the SATA devices installed in the system. Aptio Setup Utility –...

  • Page 128: Intel Txt (Lt) Configuration

    AFL2-17AB-H61 P a n e l P C  Configures the Serial-ATA controller to be in compatible Compatible EFAULT mode. In this mode, a SATA channel will replace one of the IDE channels.  S e ria l-ATA Co n tro lle r 1 [En h a n c e d ] Use the Serial-ATA Controller 1 option to configure the Serial-ATA controller mode when the SATA mode is set to IDE Mode.

  • Page 129: Usb Configuration

    AFL2-17AB-H61 P a n e l P C 7.3.7 US B Co n fig u ra tio n Use the USB Configuration menu (BIOS Menu 10) to read USB configuration information and configure the USB settings. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced USB Configuration USB Support Parameters...
  • Page 130 AFL2-17AB-H61 P a n e l P C keyboard can control the system even when there is no USB driver loaded onto the system.  Enabled Legacy USB support enabled EFAULT  Disabled Legacy USB support disabled  Auto Legacy USB support disabled if no USB devices are connected ...

  • Page 131: F81216 Super Io Configuration

    AFL2-17AB-H61 P a n e l P C 7.3.8 F81216 S u pe r IO Co nfig u ra tio n Use the F81216 Super IO Configuration menu (BIOS Menu 11) to set or change the configurations for the FDD controllers, parallel ports and serial ports. Aptio Setup Utility –...
  • Page 132 AFL2-17AB-H61 P a n e l P C 7.3.8.1.1 S e ria l P o rt 1 Co n fig u ra tio n  S e ria l P o rt [En a b le d ] Use the Serial Port option to enable or disable the serial port. ...
  • Page 133 AFL2-17AB-H61 P a n e l P C  Enable the serial port Enabled EFAULT  Ch a n g e S e ttin g s [Au to ] Use the Change Settings option to change the serial port IO port address and interrupt address.
  • Page 134 AFL2-17AB-H61 P a n e l P C  The serial port IO port address and interrupt Auto EFAULT address are automatically detected.  IO=3E8h; IRQ=7 Serial Port I/O port address is 3E8h and the interrupt address is IRQ7  IO=3F8h;...

  • Page 135: H/W Monitor

    AFL2-17AB-H61 P a n e l P C 7.3.9 H/W Mo n ito r The H/W Monitor menu (BIOS Menu 13) shows the hardware health status. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced CPU Temperature :+62 C The Temperature of Environment Temperature 1 :+29 C...
  • Page 136 AFL2-17AB-H61 P a n e l P C  Enables the Fanless Temp. Overwrite control function. Enabled  Disabled Disables the Fanless Temp. Overwrite control function. EFAULT  Te m p e ra tu re Of Fa n le s s [32 C] NOTE: If the Temperature of Fanless is enabled, the fan will only turn on when the Environment Temperature 1 reaches to the temperature set in the...

  • Page 137: Serial Port Console Redirection

    AFL2-17AB-H61 P a n e l P C  When the environment temperature is lower than 24 C, 24 C the fan will be switched off.  28 C When the environment temperature is lower than 28 C, the fan will be switched off. ...

  • Page 138: I E I Feature

    AFL2-17AB-H61 P a n e l P C  Disabled the console redirection function Disabled EFAULT  Enabled Enabled the console redirection function 7.4 iEi Fe a tu re Use the iEi Feature menu (BIOS Menu 15) to configure the auto recovery function. Aptio Setup Utility –...

  • Page 139: Chipset

    AFL2-17AB-H61 P a n e l P C  Mic ro S D Ca rd [En a b le d ] Use the Micro SD Card BIOS option to enable or disable the micro SD card. Once to run One Key Recovery function, disable the micro SD card firstly. ...

  • Page 140: Northbridge Configuration

    AFL2-17AB-H61 P a n e l P C 7.5.1 No rth b rid g e Co n fig u ra tio n Use the North Bridge menu (BIOS Menu 17) to configure the Northbridge chipset. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Chipset Memory Information Select which graphics...

  • Page 141: Southbridge Configuration

    AFL2-17AB-H61 P a n e l P C  32 MB of memory used by internal graphics device  64 MB of memory used by internal graphics device EFAULT  128M 128 MB of memory used by internal graphics device ...
  • Page 142 AFL2-17AB-H61 P a n e l P C Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Chipset Auto Power Button Status [OFF] Specify what state to go to when power is Restore AC Power Loss [Last State] re-applied after a power Power Saving Function [Disabled] failure (G3 state).
  • Page 143 AFL2-17AB-H61 P a n e l P C  WIFI Fu n c tio n [En a b le d ] Use the WIFI Function option to enable or disable the Wi-Fi function.  Wi-Fi function disabled Disabled  Enabled Wi-Fi function enabled EFAULT ...
  • Page 144 AFL2-17AB-H61 P a n e l P C  Aza lia HD Au d io [En a b le d ] Use the Azalia HD Audio option to enable or disable the High Definition Audio controller.  The onboard High Definition Audio controller is disabled Disabled ...

  • Page 145: Integrated Graphics

    AFL2-17AB-H61 P a n e l P C  The onboard PCIe LAN controller 2 is enabled Enabled EFAULT  P CIe US B 3.0 Co n tro lle r [En a b le d ] Use the PCIe USB 3.0 Controller BIOS option to enable or disable the PCIe USB 3.0 controller.

  • Page 146: Me Subsystem

    AFL2-17AB-H61 P a n e l P C  DVMT Mo d e S e le c t [DVMT Mo d e ] Use the DVMT Mode Select option to select the Intel Dynamic Video Memory Technology (DVMT) operating mode. ...
  • Page 147 AFL2-17AB-H61 P a n e l P C Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Chipset Intel ME Subsystem Configuration MEBx Mode Help ME Version 7.0.10.1203 --------------------- : Select Screen MEBx Mode [Normal] ↑ ↓: Select Item Unconfigure AMT/ME [Disabled] Enter Select...

  • Page 148: Boot

    AFL2-17AB-H61 P a n e l P C 7.6 Bo o t Use the Boot menu (BIOS Menu 21) to configure system boot options. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Boot Configuration Select the keyboard Bootup NumLock State...
  • Page 149 AFL2-17AB-H61 P a n e l P C  Qu ie t Bo o t [En a b le d ] Use the Quiet Boot BIOS option to select the screen display when the system boots.  Normal POST messages displayed Disabled ...

  • Page 150: Security

    AFL2-17AB-H61 P a n e l P C 7.7 S e c u rity Use the Security menu (BIOS Menu 22) to set system and user passwords. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save &...

  • Page 151: Save & Exit

    AFL2-17AB-H61 P a n e l P C 7.8 S a ve & Exit Use the Save & Exit menu (BIOS Menu 23) to load default BIOS values, optimal failsafe values and to save configuration changes. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset...
  • Page 152 AFL2-17AB-H61 P a n e l P C  S a ve a s Us e r De fa u lts Use the Save as User Defaults option to save the changes done so far as user defaults.  Re s to re Us e r De fa u lts Use the Restore User Defaults option to restore the user defaults to all the setup options.

  • Page 153: Cooling Management Console (Icmc)

    AFL2-17AB-H61 P a n e l P C Chapter Co o lin g Ma n a g e m e n t Co n s o le (iCMC) P a g e 137...

  • Page 154: Overview

    AFL2-17AB-H61 P a n e l P C 8.1 Ove rvie w The iCMC system cooling management console tracks system and CPU temperatures, frequency, cooling fan speeds, and allows users to configure light fanless settings. The iCMC quickly captures and reports system conditions to ensure operators can prevent system damage.

  • Page 155: Figure 8-2: Select Installation Folder

    AFL2-17AB-H61 P a n e l P C Select a folder for Cooling Management Console installation in Figure 8-2. Click S te p 4: Next to continue. Figure 8-2: Select Installation Folder S te p 5: The following screen appears. Click Next to confirm the installation. Figure 8-3: Confirm Installation P a g e 139...

  • Page 156: Figure 8-4: Installation Complete

    AFL2-17AB-H61 P a n e l P C S te p 6: The system starts installing the Cooling Management Console. When the Cooling Management Console is successfully installed, the following S te p 7: window appears. Click Close to exit. Figure 8-4: Installation Complete S te p 8: The confirmation screen offers the option of restarting the system now or later.

  • Page 157: Icmc Overview

    AFL2-17AB-H61 P a n e l P C Figure 8-6: Cooling Management Console Icon 8.2 iCMC Ove rview Figure 8-7 shows the iCMC interface. The iCMC interface is consisted of two panels: information panel (left) and chart panel (right). The chart panel can be hidden by selecting Chart visible option to “Off”.

  • Page 158: Figure 8-8: Icmc Information Panel

    AFL2-17AB-H61 P a n e l P C Figure 8-8: iCMC Information Panel Temperature The current CPU temperature. System 1 The current system temperature. System 2 The current system temperature. Environment 1 The current environment temperature detected by the temperature sensor on the system.

  • Page 159: Table 8-1: Icmc Information Panel Description

    AFL2-17AB-H61 P a n e l P C The system fan speed. “0” indicates the fan is off. System Info CPU Frequency The CPU frequency parameters. CPU Loading The CPU loading parameters. CPU Type The brand name of the CPU being used in the system. Light Fanless Settings BIOS Overwrite When the “Temperature of Fanless”...

  • Page 160: Chart Panel

    AFL2-17AB-H61 P a n e l P C 8.2.2 Ch a rt P a n e l Figure 8-9 shows the chart panel interface. The line chart is used to visualize the system data listed in the information panel. The following information is displayed in different color lines: ...

  • Page 161: Figure 8-10: Icmc - Time Interval Adjustment

    AFL2-17AB-H61 P a n e l P C The user can adjust the time interval between sampling by selecting the options in the Sampling drop down menu (see Figure 8-10). The x-axis of the line chart (Time in seconds) will change according to the adjustment. Figure 8-10: iCMC –...

  • Page 162: A Regulatory Compliance

    AFL2-17AB-H61 P a n e l P C Ap p e n d ix Re g u la to ry Co m p lia n c e P a g e 146...
  • Page 163 AFL2-17AB-H61 P a n e l P C DECLARATION OF CONFORMITY This equipment is in conformity with the following EU directives:  EMC Directive (2004/108/EC, 2014/30/EU)  Low-Voltage Directive (2006/95/EC, 2014/35/EU)  RoHS II Directive (2011/65/EU, 2015/863/EU)  Ecodesign Directive 2009/125/EC If the user modifies and/or install other devices in the equipment, the CE conformity declaration may no longer apply.
  • Page 164 AFL2-17AB-H61 P a n e l P C Español [Spanish] IEI Integration Corp declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/EU. Ελληνική [Greek] IEI Integration Corp ΔΗΛΩΝΕΙ ΟΤΙ ΕΞΟΠΛΙΣΜΟΣ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ...
  • Page 165 AFL2-17AB-H61 P a n e l P C Româna [Romanian] IEI Integration Corp declară că acest echipament este in conformitate cu cerinţele esenţiale şi cu celelalte prevederi relevante ale Directivei 2014/53/EU. Slovensko [Slovenian] IEI Integration Corp izjavlja, da je ta opreme v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 2014/53/EU.
  • Page 166 AFL2-17AB-H61 P a n e l P C FCC WARNING This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 167: B Safety Precautions

    AFL2-17AB-H61 P a n e l P C Appendix S a fe ty P re c a u tio n s P a g e 151...

  • Page 168: Safety Precautions

    AFL2-17AB-H61 P a n e l P C WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the AFL2-17AB-H61. B.1 S a fe ty P re c a u tio n s Please follow the safety precautions outlined in the sections that follow: B.1.1 Ge n e ra l S a fe ty P re c a u tio n s Please ensure the following safety precautions are adhered to at all times.

  • Page 169: Cpu Temperature Warning

    AFL2-17AB-H61 P a n e l P C B.1.2 CP U Te m p e ra tu re Wa rn in g WARNING: If the CPU Temperature Alert LED shows RED, the CPU core temperature is too high. To lower the CPU temperature, lower the environment temperature or decrease the amount of running programs.

  • Page 170: Product Disposal

    AFL2-17AB-H61 P a n e l P C B.1.4 P ro d u c t Dis p o s a l CAUTION: Risk of explosion if battery is replaced by an incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations.

  • Page 171: Maintenance And Cleaning

    AFL2-17AB-H61 P a n e l P C B.2.1 Ma in te n a n c e a n d Cle a n in g Prior to cleaning any part or component of the AFL2-17AB-H61, please read the details below. ...
  • Page 172 AFL2-17AB-H61 P a n e l P C  Cotton swabs - Cotton swaps moistened with or water are excellent tools for wiping hard to reach areas.  Foam swabs - Whenever possible, it is best to use lint free swabs such as foam swabs for cleaning.

  • Page 173: C Bios Menu Options

    AFL2-17AB-H61 P a n e l P C Appendix BIOS Me n u Op tio n s P a g e 157...
  • Page 174 AFL2-17AB-H61 P a n e l P C  BIOS Information .......................103  iWDD Vendor ........................103  iWDD Version ........................104  Memory Information ......................104  System Date [xx/xx/xx] ......................104  System Time [xx:xx:xx] .....................104  ACPI Sleep State [S1 (CPU Stop Clock)] .................106 ...
  • Page 175 AFL2-17AB-H61 P a n e l P C  Restore AC Power Loss [Last State] ................126  Power Saving Function [Disabled] ...................126  WIFI Function [Enabled] ....................127  DMIC Function [Enabled] ....................127  BT Function [Enabled] .......................127  RFID Function [Enabled] ....................127 ...

  • Page 176: D Hazardous Materials Disclosure

    AFL2-17AB-H61 P a n e l P C Appendix Ha za rd o u s Ma te ria ls Dis c lo s u re P a g e 160...
  • Page 177 AFL2-17AB-H61 P a n e l P C The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
  • Page 178 AFL2-17AB-H61 P a n e l P C 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯 醚 (P b ) (Hg ) (Cd ) (CR(VI)) (P BB) (P BDE) 壳体 显示 印刷电路板...

This manual is also suitable for:

Afl2-17ab-h61-i5/r-r13Afl2-17ab-h61-i3/r-r13Afl2-17ab-h61-i3/pc-r13Afl2-17ab-h61-p/pc-r13Afl2-17ab-h61-p/r-r13Afl2-17ab-h61-i5/pc-r13

Table of Contents