Afl2-W15B-H61; System Maintenance Introduction - IEI Technology afl2-w15b-h61 Introductory Manual

7.1 System Maintenance Introduction

If the components of the AFL2-W15B-H61 fail they must be replaced. Components that
can be replaced include:
SO-DIMM module
WLAN module
Please contact the system reseller or vendor to purchase the replacement parts. Back
cover removal instructions for the AFL2-W15B-H61 are described below.
7.2 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the

AFL2-W15B-H61

AFL2-W15B-H61 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the AFL2-W15B-H61. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the AFL2-W15B-H61 is accessed internally, or any other
electrical component is handled, the following anti-static precautions are strictly adhered
to.
Wear an anti-static wristband: - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding: - Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad: - When configuring the AFL2-W15B-H61, place it on
an antic-static pad. This reduces the possibility of ESD damaging the
AFL2-W15B-H61.
Only handle the edges of the PCB: - When handling the PCB, hold the PCB
by the edges.
Page 122
may result in permanent
AFL2-W15B-H61
damage to the