IEI Technology afl2-w15b-h61 Introductory Manual page 23

LED Indicator
Power
AT/ATX Mode
CPU Temperature Alert
Wi-Fi
RFID
Bluetooth
Auto-Dimming
Microphone
Audio Mute
Mini USB
Function
Page 6
Description
Off: power cord not attached or power supply failure
Blinking amber: the system is connected to a power
source and is ready to be turned on.
Solid blue: the system is turned on.
Power on/off by the hot keys. See
AT: the system is in AT power mode
ATX: the system is in ATX power mode
Controlled by the AT/ATX power mode switch.
Blue: CPU temperature is normal.
Red: CPU temperature is too high.
On: the Wi-Fi module is enabled
Off: the Wi-Fi module is disabled.
Controlled by the BIOS. See Section
On: the optional RFID reader is enabled
Off: the optional RFID reader is disabled.
Controlled by the hot keys. See
On: the Bluetooth module is enabled
Off: the Bluetooth module is disabled.
Controlled by the BIOS. See Section
On: the auto-dimming function is enabled
Off: the auto-dimming function is disabled.
Hold down Fn key for 3 seconds to enable/disable
auto-dimming function or control via BIOS setting (see
Section 4 .5.2).
8 7 6 H
On: the microphone is enabled
Off: the microphone is disabled.
Controlled by the BIOS. See Section
On (solid red): the audio is turned off
Off: the audio is turned on
Controlled by the hot keys. See
On: the Mini USB 2.0 module is enabled
Off: the Mini USB 2.0 module is disabled.
Controlled by the hot keys. See
Shows the status of the function keys below the LED
AFL2-W15B-H61
T able 1-3
8 7 2 H
4 .5.2
8 7 3 H
T able 1-3
8 7 4 H
4 .5.2
8 7 5 H
4 .5.2
8 7 7 H
T able 1-3
8 7 8 H
T able 1-3
8 7 9 H