3.7 At/Atx Mode Selection; 3.7.1 At Power Mode; 3.7.2 Atx Power Mode; Figure 3-11: At/Atx Switch Location - IEI Technology afl2-w15b-h61 Introductory Manual

Step 6: Replace the internal cover and back cover using previously removed retention
screws.

3.7 AT/ATX Mode Selection

AT or ATX power mode can be used on the AFL2-W15B-H61. The selection is made
through an AT/ATX switch located on the bottom panel. To select AT mode or ATX mode,
follow the steps below.
Step 1: Locate the AT/ATX switch on the bottom panel (

Figure 3-11: AT/ATX Switch Location

Step 2: Adjust the AT/ATX switch.

3.7.1 AT Power Mode

With the AT mode selected, the power is controlled by a central power unit rather than a
power switch. The AFL2-W15B-H61 panel PC turns on automatically when the power is
connected. The AT mode benefits a production line to control multiple panel PCs from a
central management center and other applications including:
ATM
Self-service kiosk
Plant environment monitoring system
Factory automation platform
Manufacturing shop flow

3.7.2 ATX Power Mode

With the ATX mode selected, the AFL2-W15B-H61 panel PC goes in a standby mode
when it is turned off. The panel PC can be easily turned on via network or a power switch
in standby mode. Remote power control is perfect for advertising applications since the
Page 28
Step 0:
Step 0:
AFL2-W15B-H61
F igure 3-11).
8 9 9 H