Starting Setup; Using Setup - IEI Technology afl2-w15b-h61 Introductory Manual

4.1 Introduction
A licensed copy of the BIOS is preprogrammed into the ROM BIOS. The BIOS setup
program allows users to modify the basic system configuration. This chapter describes
how to access the BIOS setup program and the configuration options that may be
changed.

4.1.1 Starting Setup

The UEFI BIOS is activated when the computer is turned on. The setup program can be
activated in one of two ways.
1. Press the DEL or F2 key as soon as the system is turned on or
2. Press the DEL or F2 key when the "Press DEL or F2 to enter
If the message disappears before the DEL or F2 key is pressed, restart the computer and
try again.

4.1.2 Using Setup

Use the arrow keys to highlight items, press E
PageDown keys to change entries, press F1 for help and press E
keys are shown in the following table.
Key
Up arrow Move to the item above
Down arrow Move to the item below
Left arrow Move to the item on the left hand side
Right arrow Move to the item on the right hand side
+ Increase the numeric value or make changes
- Decrease the numeric value or make changes
F1 key General help, only for Status Page Setup Menu and Option
Page Setup Menu
Page 50
SETUP" message appears on the screen.
Function
AFL2-W15B-H61
0.
to select, use the PageUp and
NTER
to quit. Navigation
SC