Figure C-30: Partitions For Linux - IEI Technology afl2-w15b-h61 Introductory Manual

AFL2-W15B-H61
Partition 1: /
Partition 2: SWAP
NOTE:
Please reserve enough space for partition 3 for saving recovery
images.

Figure C-30: Partitions for Linux

Step 3: Create a recovery partition. Insert the recovery CD into the optical disk drive.
Follow Step 1
commands (marked in red) to create a partition for recovery images.
system32>diskpart
DISKPART>list vol
DISKPART>sel disk 0
DISKPART>create part pri size=
DISKPART>assign letter=N
DISKPART>exit
system32>format N: /fs:ntfs /q /v:Recovery /y
system32>exit
Step 4: Build the recovery partition. Press any key to boot from the recovery CD. It will
take a while to launch the recovery tool. Please be patient. When the recovery
tool setup menu appears, type <3> and press <Enter> (
Symantec Ghost window appears and starts configuring the system to build a
~ Step 3 described in Section
___
C .2.2. Then type the following
1 1 1 6 H
F igure C-31). The
1 1 1 7 H
Page 179