Figure 3-9: Rfid Reader Module Installation; Figure 3-10: Rfid Reader Connection - IEI Technology afl2-w15b-h61 Introductory Manual
Flat bezel panel pc with 2nd generation intel core i7/i5/i3, pentium and celeron processor, touchscreen, wi-fi, usb, gbe lan, rs-232/422/485, 1.3m pixels camera, hd audio and rohs
Table of Contents
Advertisement
AFL2-W15B-H61
Step 3:
Install the RFID reader module in the location shown in
retention screws.
Figure 3-9: RFID Reader Module Installation
Step 4:
Connect the RFID module to the RFID connector on the main board (
3-10). The RFID connector pinouts are listed in Section
Step 5:
Place the RFID antenna on the location shown in
RFID antenna to the RFID antenna connector on the RFID module.
Figure 3-10: RFID Reader Connection
F igure 3-9 by two
8 9 5 H
F igure
8 9 6 H
8 .2.17.
8 9 7 H
F igure 3-10. Connect the
8 9 8 H
Page 27
Advertisement
Chapters
Table of Contents
