Figure 2-28: Serial Device Connector
Secure the connector. Secure the serial device connector to the external
Step 3:
interface by tightening the two retention screws on either side of the connector.
2.9.3 USB Device Connection
To connect USB devices to the AFL2-W15A-N270, please follow the instructions below.
Located the USB connectors. The locations of the USB connectors are shown
Step 1:
in Figure 2-26.
Align the connectors. Align the USB device connector with one of the
Step 2:
connectors on the bottom panel. See Figure 2-29.
Figure 2-29: USB Device Connection
Page 38
AFL2-W15A-N270 Panel PC
Step 0: