IEI Technology AFL2-W19A-H61 Series User Manual
  1. Manuals
  2. Brands
  3. IEI Technology Manuals
  4. Touch Panel
  5. AFL2-W19A-H61 Series
  6. User manual

IEI Technology AFL2-W19A-H61 Series User Manual

Flat bezel panel pc with 2nd generation intel core i7/ i5/ i3, pentium and celeron processor, touch screen, wi-fi, usb, dual gbe lan , rs-232/422/485, 1.3m pixels camera, hd audio and rohs
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AFL2-W19A/AB-H61
IEI Te c h n o lo g y Co rp .
MODEL:
AFL2-W19A/AB-H61 S e rie s
Flat Bezel Panel PC with 2nd Generation Intel® Core™ i7/ i5/ i3,
Pentium® and Celeron® processor, Touch Screen, Wi-Fi, USB,
Dual GbE LAN , RS-232/422/485, 1.3M pixels Camera,
Re v. 1.21 - 25 J u ly, 2013
HD Audio and RoHS
Us e r Ma n u a l
Us e r Ma n u a l
Page I

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AFL2-W19A-H61 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for IEI Technology AFL2-W19A-H61 Series

Summary of Contents for IEI Technology AFL2-W19A-H61 Series

  • Page 1 AFL2-W19A/AB-H61 IEI Te c h n o lo g y Co rp . MODEL: AFL2-W19A/AB-H61 S e rie s Flat Bezel Panel PC with 2nd Generation Intel® Core™ i7/ i5/ i3, Pentium® and Celeron® processor, Touch Screen, Wi-Fi, USB, Dual GbE LAN , RS-232/422/485, 1.3M pixels Camera, HD Audio and RoHS Us e r Ma n u a l Us e r Ma n u a l...
  • Page 2 AFL2-W19A/AB-H61 Re vis io n Date Version Changes 25 July, 2013 1.21 Update the Note for CPU temperature alert LED in Section 1.2.1.1: LED Indicators 14 May, 2013 1.20 Add Section 1.2.1.2: LED light Update the mechanical keys to film keys 4 January, 2013 1.11 Update LED light bar overview...
  • Page 3 AFL2-W19A/AB-H61 Co p yrig h t COP YRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

  • Page 4: Table Of Contents

    AFL2-W19A/AB-H61 Ta b le o f Co n te n ts 1 INTRODUCTION ......................1 1.1 AFL2-W19A/AB-H61 F PC O ........2 EZEL ANEL VERVIEW 1.1.1 Model Variations ....................3 1.1.2 Features ......................3 1.1.3 Light Fanless Technology Design ..............4 1.2 E ....................
  • Page 5 AFL2-W19A/AB-H61 2.4.2.6 LIGHTBAR_BLNK_Settings ..............28 2.4.2.7 LIGHTBAR_BLNK_Type ................ 29 2.4.2.8 LIGHTBAR_LED_ModeSet ..............29 2.4.3 Structures ......................30 2.4.3.1 _LED_COLOR_INFO ................30 2.4.3.2 _LED_BLNK_SET ................... 30 2.4.3.3 _LED_BLNK_SET ................... 31 2.4.3.4 _LED_MODE_SETTINGS ..............32 2.4.4 Programming Example ..................32 2.4.4.1 Turn on LED - single ................32 2.4.4.2 Turn on LED - multiple ................
  • Page 6 AFL2-W19A/AB-H61 5.4 HDD I ....................52 NSTALLATION 5.5 K-T ............55 EMPERATURE ENSOR NSTALLATION 5.6 RFID R ) ..................56 EADER PTIONAL 5.7 DVD-ROM I ) ..............57 NSTALLATION PTIONAL 5.8 AT/ATX M ..................59 ELECTION 5.8.1 AT Power Mode ....................60 5.8.2 ATX Power Mode .....................
  • Page 7 AFL2-W19A/AB-H61 6.2.7 Debug Port Connector ..................88 6.2.8 Digital Microphone Connector ................ 89 6.2.9 EC Debug Connector ..................90 6.2.10 EC Programming Connector ................. 91 6.2.11 Hotkey Connector ................... 92 6.2.12 Hotkey LED Connector .................. 92 6.2.13 JSATA Connector ................... 93 6.2.14 K Type Thermocouple Connector ..............
  • Page 8 AFL2-W19A/AB-H61 7.5 R ..................120 EPLACING OMPONENTS 7.5.1 Memory Module Replacement ............... 120 7.5.2 WLAN Card Replacement ................121 7.6 R ................... 124 EINSTALLING THE OVERS 8 BIOS SETUP ......................125 8.1 I ....................... 126 NTRODUCTION 8.1.1 Starting Setup ....................126 8.1.2 Using Setup ....................
  • Page 9 AFL2-W19A/AB-H61 9 SOFTWARE DRIVERS .................... 162 9.1 A ................163 VAILABLE OFTWARE RIVERS 9.2 S ................163 TARTING THE RIVER ROGRAM 9.3 C ................164 HIPSET RIVER NSTALLATION 9.4 G ................168 RAPHICS RIVER NSTALLATION 9.5 T ..................173 OUCH CREEN RIVER 9.5.1 Calibrating the Touch Screen .................
  • Page 10 AFL2-W19A/AB-H61 C.1.1 System Requirement ..................217 C.1.2 Supported Operating System ................. 218 C.2 S ................ 219 ETUP ROCEDURE FOR INDOWS C.2.1 Hardware and BIOS Setup ................220 C.2.2 Create Partitions ................... 220 C.2.3 Install Operating System, Drivers and Applications ........224 C.2.4 Building the Recovery Partition ..............
  • Page 11 AFL2-W19A/AB-H61 Lis t o f Fig u re s Figure 1-1: AFL2-W19A/AB-H61 Flat Bezel Panel PC ..............2 Figure 1-2: AFL2-W19A/AB-H61 Front View ................5 Figure 1-3: LED Indicators ......................5 Figure 1-4: LED Light Software (Auto) ..................7 Figure 1-5: LED Light Software (Manual) ..................7 Figure 1-6: Function Keys ......................
  • Page 12 AFL2-W19A/AB-H61 Figure 3-7: Audio Jack .........................44 Figure 5-1: HDD Cover Retention Screws ..................53 Figure 5-2: HDD Bracket Screw ....................53 Figure 5-3: Removing the HDD Bracket ..................54 Figure 5-4: Inserting the HDD ......................54 Figure 5-5: Securing the HDD ......................55 Figure 5-6: Insert the K-type Temperature Sensor Cable ............56 Figure 5-7: Connect the RFID USB cable ...................56 Figure 5-8: Install the RFID module ....................57 Figure 5-9: DVD-ROM Cover ......................58...
  • Page 13 AFL2-W19A/AB-H61 Figure 6-8: DDR3 DIMM Slot Locations ..................88 Figure 6-9: Debug Port Connector Location ................88 Figure 6-10: Digital Microphone Connector Location ...............89 Figure 6-11: Debug Port Connector Location ................90 Figure 6-12: EC Programming Connector Location ..............91 Figure 6-13: Hotkey Connector Location ...................92 Figure 6-14: Hotkey LED Connector Location ................93 Figure 6-15: JSATA Connector Location ...................94 Figure 6-16: K Type Thermocouple Connector Location ............95...
  • Page 14 AFL2-W19A/AB-H61 Figure 7-7: Removing the WLAN card ..................123 Figure 7-8: Attaching the Antennas ..................123 Figure 9-1: Drivers ........................164 Figure 9-2: Chipset Driver Screen .....................165 Figure 9-3: Chipset Driver Welcome Screen ................165 Figure 9-4: Chipset Driver License Agreement ...............166 Figure 9-5: Chipset Driver Read Me File ..................167 Figure 9-6: Chipset Driver Setup Operations ................167 Figure 9-7: Chipset Driver Installation Finish Screen .............168 Figure 9-8: Graphics Driver Read Me File ................169...
  • Page 15 AFL2-W19A/AB-H61 Figure 9-34: Intel® ME Driver Read Me File ................184 Figure 9-35: Intel® ME Driver Setup Operations ..............185 Figure 9-36: Intel® ME Driver Installation Finish Screen ............185 Figure 9-37: USB 3.0 Driver Welcome Screen .................186 Figure 9-38: USB 3.0 Driver License Agreement ..............187 Figure 9-39: USB 3.0 Driver Installation ...................187 Figure 9-40: USB 3.0 Driver Update Complete ................188 Figure 9-41: License Agreement ....................189...
  • Page 16 AFL2-W19A/AB-H61 Figure C-5: Partition Creation Commands ................223 Figure C-6: Launching the Recovery Tool ................225 Figure C-7: Manual Recovery Environment for Windows ............225 Figure C-8: Building the Recovery Partition ................226 Figure C-9: Press Any Key to Continue ...................226 Figure C-10: Press F3 to Boot into Recovery Mode ..............227 Figure C-11: Recovery Tool Menu ....................227 Figure C-12: About Symantec Ghost Window .................228 Figure C-13: Symantec Ghost Path ..................228...
  • Page 17 AFL2-W19A/AB-H61 Figure C-40: Symantec Ghost Window ..................244 Page XVII...
  • Page 18 AFL2-W19A/AB-H61 Lis t o f Ta b le s Table 1-1: AFL2-W19A/AB-H61 Model Variations ................ 3 Table 1-2: LED Indicators ......................6 Table 1-3: Function Key Descriptions ..................8 Table 1-4: System Specifications ....................13 Table 2-1: LED Simulator Software Description ................20 Table 5-1: HDMI Pinouts ......................71 Table 5-2: LAN1 Pinouts ......................73 Table 5-3: LAN2 Pinouts ......................73...
  • Page 19 AFL2-W19A/AB-H61 Table 6-18: LED Bar Connectors Pinouts ................100 Table 6-19: LOGO LED Connector Pinouts ................101 Table 6-20: Mini USB Connector Pinouts (MINUSB2) .............102 Table 6-21: Mini USB Connector Pinouts (MINUSB1) .............103 Table 6-22: Power Button Connector Pinouts .................104 Table 6-23: RFID Connector Pinouts ..................105 Table 6-24: SATA 3Gb/s Drive Connector Pinouts ..............106 Table 6-25: SATA Power Connector Pinouts ................107 Table 6-26: Speaker Connector Pinouts ..................108...
  • Page 20 AFL2-W19A/AB-H61 Lis t o f BIOS Me n u s BIOS Menu 1: Main ........................128 BIOS Menu 2: Advanced ......................130 BIOS Menu 3: ACPI Configuration ....................130 BIOS Menu 4: RTC Wake Settings ....................131 BIOS Menu 5: TPM Configuration .....................133 BIOS Menu 6: CPU Configuration .....................134 BIOS Menu 7: CPU Configuration .....................135 BIOS Menu 8: IDE Configuration ....................136 BIOS Menu 9: Intel TXT(LT) Configuration ................137...

  • Page 21: Introduction

    AFL2-W19A/AB-H61 Chapter In tro d u c tio n P a g e 1...

  • Page 22: Afl2-W19A/Ab-H61 Flat Bezel Panel Pc Overview

    AFL2-W19A/AB-H61 1.1 AFL2-W19A/AB-H61 Fla t Be ze l P a n e l P C Ove rview Figure 1-1: AFL2-W19A/AB-H61 Flat Bezel Panel PC The AFL2-W19A/AB-H61 is a 2nd Generation Intel® Core™ i7/ i5/ i3, Pentium® and Celeron® processor powered flat bezel panel PC with a rich variety of functions and peripherals.

  • Page 23: Model Variations

    AFL2-W19A/AB-H61 1.1.1 Mo d e l Va ria tio n s The model variations of the AFL2-W19A/AB-H61 Series are listed below. Model No. Touch Screen LED Light Bar Intel® Core™ i5 Series AFL2-W19A-H61-i5/R-R11 Resistive Touch AFL2-W19AB-H61-i5/R-R11 Resistive Touch AFL2-W19A-H61-i5/PC-R11 Projected capacitive AFL2-W19AB-H61-i5/PC-R11 Projected capacitive Intel®...

  • Page 24: Light Fanless Technology Design

    AFL2-W19A/AB-H61  IP64 compliant front panel  Auto dimming control  Light fanless design  K-type thermalcouple temperature sensor  Wide range 9~36 VDC input 1.1.3 Lig h t Fa n le s s Te c h n o lo g y De s ig n AFL2-W19A/AB-H61 series panel PCs are designed with light fanless technology.

  • Page 25: External Overview

    AFL2-W19A/AB-H61 1.2 Exte rn a l Ove rview 1.2.1 Fro n t P a n e l The front side of the AFL2-W19A/AB-H61 is a flat bezel panel TFT LCD screen surrounded by a PC/ABS plastic frame. The LED light bars are for AFL2-W19AB-H61 series only.

  • Page 26: Table 1-2: Led Indicators

    AFL2-W19A/AB-H61 The descriptions of each LED indicator are listed below. LED In d ic a to r De s c rip tio n Shows power status. Power Orange: Standby mode. Blue: Power-on mode. Shows the power mode status. Controlled by the AT/ATX AT/ATX Mode power mode switch.

  • Page 27: Led Light

    AFL2-W19A/AB-H61 NOTE: The CPU temperature alert LED shows in red when the CPU temperature reaches 80ºC. If the CPU temperature alert LED shows in red, the user must lower the environments temperature or close some running applications to cool down the CPU. 1.2.1.2 LED Lig h t To configure the LED Indicators light through a quick and easy way, please follow the steps below:...

  • Page 28: Function Keys

    AFL2-W19A/AB-H61 1.2.1.3 Fu n c tio n Ke ys The corresponding Function Keys are located under the bottom right hand corner of the LCD screen (Figure 1-6). Figure 1-6: Function Keys The Function Keys are described in Table 1-3: Ke y Co m b in a tio n Fu n c tio n Ke y De s c rip tio n RFID Enable/Disable Fn + LCD On/Off...

  • Page 29: Rear Panel

    AFL2-W19A/AB-H61 1.2.2 Re a r P a n e l The rear panel provides access to retention screw holes that support various mounting. Refer to Figure 1-7. Figure 1-7: AFL2-W19A/AB-H61 Rear View 1.2.3 Bo tto m P a n e l The bottom panel of the AFL2-W19A/AB-H61 has the following features (Figure 1-8): ...

  • Page 30: Left Side Panel

    AFL2-W19A/AB-H61  2 x USB 2.0 connectors  2 x USB 3.0 connectors  1 x VGA port Figure 1-8: AFL2-W19A/AB-H61 Bottom Panel 1.2.4 Le ft S id e P a ne l The left side panel of the AFL2-W19A/AB-H61 has the following features (Figure 1-9): ...

  • Page 31: Right Side Panel

    AFL2-W19A/AB-H61 Figure 1-9: AFL2-W19A/AB-H61 Left Side Panel 1.2.5 Rig h t S id e P a ne l The right side panel of the AFL2-W19A/AB-H61 provides access to the CD-ROM (optional) (Figure 1-10): Figure 1-10: AFL2-W19A/AB-H61 Right Side Panel 1.3 In te rn a l Ove rview The AFL2-W19A/AB-H61 has the following components installed internally: ...

  • Page 32: System Specifications

    AFL2-W19A/AB-H61 1.4 S ys te m Sp e c ific a tio n s The technical specifications for the AFL2-W19A/AB-H61 systems are listed in Table 1-4. Specification AFL2-W19A/AB-H61 LCD Size W18.9” (16:9) Max. Resolution 1440 (W) X 900 (H) Brightness (cd/m Contrast Ratio 1000:1 LCD Color...

  • Page 33: Table 1-4: System Specifications

    AFL2-W19A/AB-H61 OSD Function LCD on / off, brightness up / down, volume up / down, Hot Key Construction Material PC + ABS plastic front frame Mounting Panel/Wall/Stand/Arm (VESA 100 mm x 100 mm) Front Panel Color Black Weight (Net/Gross) 7.9 kg / 10.0 kg Dimensions (W x H x D) (mm) 488 x 361x 65 Operation Temperature...

  • Page 34: Led Light Bar (Optional)

    AFL2-W19A/AB-H61 Chapter LED Lig h t Ba r (Op tio n a l) P a g e 14...

  • Page 35: Overview

    AFL2-W19A/AB-H61 2.1 Ove rvie w To notify field staffs in an efficient way to increase productivity, the AFL2-W19A-H61 integrates LED dash light system on the side frame. With the provided API software and LED simulator software, users can customize their notification according to their needs through a quick and easy user interface.

  • Page 36: Figure 2-2: Select Installation Folder Screen

    AFL2-W19A/AB-H61 Click Next to continue. S te p 7: The Select Installation Folder screen in Figure 2-2 appears. S te p 8: Figure 2-2: Select Installation Folder Screen Click Next to continue. S te p 9: S te p 10: The Confirm Installation screen in Figure 2-3 appears.

  • Page 37: Figure 2-3: Confirm Installation Screen

    AFL2-W19A/AB-H61 Figure 2-3: Confirm Installation Screen S te p 12: The program begins to install. When the installation is complete, the screen in Figure 2-4 appears. S te p 13: P a g e 17...

  • Page 38: Figure 2-4: Installation Complete

    AFL2-W19A/AB-H61 Figure 2-4: Installation Complete Click Close to complete the installation. S te p 14: The iEi LED Light Bar Display Simulator icon shows on the computer S te p 15: desktop. Double click it to open the iEi LED Light Bar Display Simulator, as shown in S te p 16: Figure 2-5.

  • Page 39: Figure 2-5: Iei Led Light Bar Display Simulator

    AFL2-W19A/AB-H61 Figure 2-5: iEi LED Light Bar Display Simulator The descriptions of iEi LED Light Bar Display Simulator are listed below. Fu n c tio n De s c rip tio n Clear all current commands Load the configuration file ( *.cld ) Load Save all current commands Save...

  • Page 40: Figure 2-6: Color Setting Area

    AFL2-W19A/AB-H61 Fu n c tio n De s c rip tio n Select all the LED simulation buttons Select the top LED simulation buttons Select the left LED simulation buttons LEFT Select the right LED simulation buttons RIGHT LED simulation buttons 1~34 Table 2-1: LED Simulator Software Description S te p 17:...

  • Page 41: Figure 2-8: Simulate The Led Light

    AFL2-W19A/AB-H61 S te p 19: After setting the color, click LED simulation button and the color of selected LED simulation button will automatically change. See Figure 2-8. Figure 2-8: Simulate the LED Light If you want to set all the left LED simulation buttons for a certain color at the S te p 20: same time, click the “LEFT"...

  • Page 42: Figure 2-9: Set The Left Leds

    AFL2-W19A/AB-H61 Figure 2-9: Set the Left LEDs If you want to set all the LED simulation buttons for a certain color at the same S te p 21: time, click the “ALL" button. Figure 2-10: Set All the LEDs P a g e 22...

  • Page 43: Figure 2-11: Light Duration

    AFL2-W19A/AB-H61 S te p 22: Enter the light duration. Please note that the unit is second, enter a number between 1 and 20. See Figure 2-11. Figure 2-11: Light Duration S te p 23: Press the Add button to insert a new control command. You may continue to set a new command in accordance with Step14 ~ Step19.

  • Page 44: Figure 2-12: Add New Command

    AFL2-W19A/AB-H61 Figure 2-12: Add new command Press the Loop Start button to set loop start point. S te p 24: Figure 2-13: Add Loop Start Press the Loop End button to set loop end point. S te p 25: P a g e 24...

  • Page 45: I E Iled Run

    AFL2-W19A/AB-H61 Figure 2-14: Add Loop End S te p 26: Press the Run button to simulate. 2.3 iEi LED Ru n To configure the LED light bars through a quick and easy way, please follow the steps below: S te p 1: Make sure the LED Bar driver is properly installed.

  • Page 46: Led Control Api

    AFL2-W19A/AB-H61 2.4 LED Co n tro l AP I 2.4.1 In tro d u c tio n This chapter aims to explain how to use LED Light Bar Control API, and support API version is V1.0.0.7. Due LED Light Bar driver only has x86 version, this API could be used in the Windows 2000/XP(x86)/2003/7(x86) environments.

  • Page 47: Lightbar_Driveruninit

    AFL2-W19A/AB-H61 2.4.2.2 LIGHTBAR_Drive rUn in it Syntax: PACSM_LIGHTBAR_CTRL STD_Void LIGHTBAR_DriverUninit(HANDLE hDev) Parameters: hDev [IN] – Handle be released. Return value: True if success. Remarks: Call this function to stop and uninitialized the LED Driver and to release resource of Handle. 2.4.2.3 LIGHTBAR_De vic e In it Syntax: PACSM_LIGHTBAR_CTRL STD_BOOLEN LIGHTBAR_DeviceInit(HANDLE hDev)

  • Page 48: Lightbar_Brightness_Single

    AFL2-W19A/AB-H61 2.4.2.5 LIGHTBAR_Brig h tn e s s _S in g le Syntax: PACSM_LIGHTBAR_CTRL STD_BOOLEN LIGHTBAR_Brightness_Single( HANDLE hDev, PLED_COLOR_INFO Brightness_Step, int INFO_Size) Parameters: hDev [IN] – Input Handle. Brightness_Step [IN] –Point to structures buffers to write. (see Section 2.4.3) INFO_Size [IN] – describe the data structure array size. Return value: True if success.

  • Page 49: Lightbar_Blnk_Type

    AFL2-W19A/AB-H61 2.4.2.7 LIGHTBAR_BLNK_Typ e Syntax: PACSM_LIGHTBAR_CTRL STD_BOOLEN LIGHTBAR_BLNK_Type( HANDLE hDev, PLED_BLNK_TYPE Blinking_Type) Parameters: hDev [IN] – Input Handle. Brightness_Step [IN] –Point to structures buffers to write. (see Section 2.4.3) Return value: True if success. Remarks: This function is used to turn on/off LED IC blinking control via drivers. 2.4.2.8 LIGHTBAR_LED_Mo d e S e t Syntax: PACSM_LIGHTBAR_CTRL STD_BOOLEN LIGHTBAR_LED_ModeSet (...

  • Page 50: Structures

    AFL2-W19A/AB-H61 2.4.3 Stru c tu re s 2.4.3.1 _LED_COLOR_INFO Syntax: typedef struct _LED_COLOR_INFO{ LED_INFO LED_Info; int R_LEVEL; int G_LEVEL; int B_LEVEL; }LED_COLOR_INFO, *PLED_COLOR_INFO; Parameters: R_LEVEL 、 G_LEVEL 、 B_LEVEL [int] - Store the Brightness Level information for R, G and B LED. The brightness level was from 0 to 7. LED_Info [structure] - The LED IC address was stored in Main_Addr on the I2c bus, and LED List number are stored in R_LN 、...

  • Page 51: Led_Blnk_Set

    AFL2-W19A/AB-H61 frequency 24Hz)，0xFF = (10.73s)，Frequency = [(0~255) + 1]/24= x(second)，Ex：300ms = (7 + 1) / 24 ≒ 0.333s。 Remarks: This structure has used to store the blinking duty cycle and frequency of LED IC. Please attention one LED IC only has one duty cycle and frequency to be group used, It means all LED has the same blink mode on a LED IC.

  • Page 52: Led_Mode_Settings

    AFL2-W19A/AB-H61 2.4.3.4 _LED_MODE_S ETTINGS Syntax: typedef struct _LED_MODE_SETTINGS{ UCHAR Main_Addr; //Main address LED_00; LED_01; LED_02; LED_03; LED_04; LED_05; LED_06; LED_07; LED_08; LED_09; LED_10; LED_11; LED_12; LED_13; LED_14; }LED_MODE_SETTINGS, *PLED_MODE_SETTINGS; Parameters: Main_Addr [UCHAR] – IC Address on I2C bus. LED_00 ~ LED_15: Each LED operation mode, defined by： #define LED_DispMode_OFF //Turn OFF LED.

  • Page 53: Turn On Led - Multiple

    AFL2-W19A/AB-H61 HANDLE hSMB_Dev = LIGHTBAR_DriverInit();//Init SMBAPI driver and get device Handle. LIGHTBAR_DeviceInit(hSMB_Dev);//Init Target device //Set LED level information. LEDCOLOR.R_LEVEL = 7; LEDCOLOR.G_LEVEL = 7; LEDCOLOR.B_LEVEL = 7; //Set LED Address LEDCOLOR.LED_Info.Main_Addr = 0xC0; LEDCOLOR.LED_Info.R_LN = 0x00; LEDCOLOR.LED_Info.G_LN = 0x01; LEDCOLOR.LED_Info.B_LN = 0x02; If(LIGHTBAR_Brightness_Single(hSMB_Dev, LEDCOLOR, 1) == False){ //Error message LIGHTBAR_DeviceClose(hSMB_Dev);...
  • Page 54 AFL2-W19A/AB-H61 LEDCOLOR [0].G_LEVEL = 7; LEDCOLOR [0].B_LEVEL = 7; LEDCOLOR [1].LED_Info.Main_Addr = 0xD0; LEDCOLOR [1].LED_Info.R_LN = 0x05; LEDCOLOR [1].LED_Info.G_LN = 0x06; LEDCOLOR [1].LED_Info.B_LN = 0x07; LEDCOLOR [1].R_LEVEL = 7; LEDCOLOR [1].G_LEVEL = 7; LEDCOLOR [1].B_LEVEL = 7; LEDCOLOR [2].LED_Info.Main_Addr = 0xD0; LEDCOLOR [2].LED_Info.R_LN = 0x08;...

  • Page 55: Led Blink - 1

    AFL2-W19A/AB-H61 LIGHTBAR_DeviceClose(hSMB_Dev); //Close Device. LIGHTBAR_DriverUninit(hSMB_Dev); //Close Driver Handle delete LEDCOLOR; 2.4.4.3 LED Blin k - 1 PLED_MODE_SETTINGS LED_ModeSet = (PLED_MODE_SETTINGS)malloc(sizeof(LED_MODE_SETTINGS)); PLED_BLNK_SET LED_Blinking_Set = (P LED_BLNK_SET)malloc(sizeof(LED_BLNK_SET)); PLED_BLNK_TYPE LED_Blinking_Type = (PLED_BLNK_TYPE)malloc(sizeof(LED_BLNK_TYPE)); // Set Structure: Set Broadcast address LED_ModeSet.Main_Addr = 0xD0; LED_Blinking_Set.Main_Addr = 0xD0; LED_Blinking_Type.Main_Addr = 0xD0;...

  • Page 56: Led Blink - 2

    AFL2-W19A/AB-H61 LED_ModeSet.LED_14 = LED_DispMode_BLNK; LED_ModeSet.LED_15 = LED_DispMode_BLNK; //Set Structure: Enable blinking of IC LED_Blinking_Type.BLNK_TYPE = LED_BLNK_ON; LIGHTBAR_BLNK_Settings(hSMB_Dev, LED_Blinking_Set); //Set LED blinking settings. LIGHTBAR_LED_ModeSet(hSMB_Dev, LED_ModeSet) //Set LED Operation Mode. LIGHTBAR_BLNK_Type(hSMB_Dev, LED_Blinking_Type); //Enable LED Blinking. 2.4.4.4 LED Blin k - 2 PLED_MODE_SETTINGS LED_ModeSet = (PLED_MODE_SETTINGS)malloc(sizeof(LED_MODE_SETTINGS));...
  • Page 57 AFL2-W19A/AB-H61 LED_ModeSet.LED_06 = LED_DispMode_Gen; LED_ModeSet.LED_07 = LED_DispMode_Gen; LED_ModeSet.LED_08 = LED_DispMode_Gen; LED_ModeSet.LED_09 = LED_DispMode_BLNK; LED_ModeSet.LED_10 = LED_DispMode_BLNK; LED_ModeSet.LED_11 = LED_DispMode_BLNK; LED_ModeSet.LED_12 = LED_DispMode_Gen; LED_ModeSet.LED_13 = LED_DispMode_Gen; LED_ModeSet.LED_14 = LED_DispMode_Gen; LED_ModeSet.LED_15 = LED_DispMode_BLNK; //Set Structure: Enable blinking of IC LED_Blinking_Type.BLNK_TYPE = LED_BLNK_ON; LIGHTBAR_BLNK_Settings(hSMB_Dev, LED_Blinking_Set);...
  • Page 58 AFL2-W19A/AB-H61 LED_B_ListNumber = 10 LED_R_ListNumber = 02 LED_G_ListNumber = 0F LED_G_ListNumber = 03 LED_R_ListNumber = 0E LED_B_ListNumber = 04 LED_B_ListNumber = 0D LED_R_ListNumber = 05 LED_G_ListNumber = 0C LED_G_ListNumber = 06 LED_R_ListNumber = 0B LED_B_ListNumber = 07 LED_B_ListNumber = 0A LED_R_ListNumber = 08 LED_G_ListNumber = 09 LED_G_ListNumber = 09...

  • Page 59: Detailed Specifications

    AFL2-W19A/AB-H61 Chapter De ta ile d S p e c ific a tio n s P a g e 39...

  • Page 60: Dimensions

    AFL2-W19A/AB-H61 3.1 Dim e n s io n s The AFL2-W19A/AB-H61 dimensions are shown below.  Width: 488.0 mm  Height: 361.0 mm  Depth: 65.0 mm Figure 3-1: AFL2-W19A/AB-H61 Dimensions (mm) P a g e 40...

  • Page 61: Intel ® Core ™ Desktop Processor

    AFL2-W19A/AB-H61 3.2 In te l® Co re ™ De s kto p P ro c e s s or An Intel® 2nd generation Core™ desktop processor is installed in the system. The Sandy Bridge CPU interfaces with the H61 chipset through a Direct Media Interface (DMI) and a Flexible Display Interface (FDI).

  • Page 62: Lan Connectivity

    AFL2-W19A/AB-H61 Figure 3-2: Serial Ports 3.4.2 LAN Co n n e c tivity The AFL2-W19A/AB-H61 has one RJ-45 LAN connector on the bottom panel and one RJ-45 LAN connector on the left side panel. Figure 3-3: RJ-45 Ethernet Connector (Bottom Panel) P a g e 42...

  • Page 63: External Usb Connectors

    AFL2-W19A/AB-H61 Figure 3-4: RJ-45 Ethernet Connector (Left Side Panel) The PCIe LAN from the Intel® H61 chipset of the AFL2-W19A/AB-H61 is interfaced to the Realtek RTL8111E PCIe gigabit Ethernet (GbE) controllers. The RTL8111E controllers are connected directly to the RJ-45 connectors and provide external GbE connectivity. 3.4.3 Exte rn a l US B Co n n e c to rs There are two USB 2.0 connectors and two USB 3.0 connectors on the bottom panel and one USB 2.0 connector on the left side panel of the AFL2-W19A/AB-H61.

  • Page 64: Audio

    AFL2-W19A/AB-H61 Figure 3-6: External USB Ports (Left Side Panel) 3.5 Au d io 3.5.1 Au d io Co d e c Co n tro lle r The integrated HD Audio compliant audio controller on the Intel® H61 PCH is integrated to a Realtek ALC892 audio codec.

  • Page 65: Unpacking

    AFL2-W19A/AB-H61 Chapter Un p a c kin g P a g e 45...

  • Page 66: Unpacking

    AFL2-W19A/AB-H61 4.1 Un pa c kin g To unpack the flat bezel panel PC, follow the steps below: WARNING! The front side LCD screen has a protective plastic cover stuck to the screen. Only remove the plastic cover after the flat bezel panel PC has been properly installed.
  • Page 67 AFL2-W19A/AB-H61 Power adapter (P/N: 63000-FSP120AAB-RS) Power cord (P/N: 32702-000401-100-RS) Power transfer cord (P/N: 32000-089400-RS) Infrared Remote Controller (P/N: 7Z000-SLPCB005-RS) IO bracket (P/N: 41013-0290C2-00-RS) Temperature Sensor Cable (P/N: 32133-004300-100-RS) (P/N: 43125-0002C0-00-RS) M3 screw pack (P/N: 44013-030041-RS) M4 screw pack (P/N: 44033-040061-RS) Utility CD One Key Recovery CD Op tio n a l...
  • Page 68 AFL2-W19A/AB-H61 Panel Mounting Kit (P/N: AFL2PK-15B) Wall mounting kit (P/N: AFLWK-19/AFLWK-19B) Rack Mounting Kit (P/N: AFL2RK-19A) (P/N: ARM-31-RS) Stand (P/N: STAND-A19/ STAND-B19/ STAND-C19/ STAND-210-R11) Hybrid Card Reader (P/N: AFL2P-12AMSI-U-R10) Magnetic Stripe Reader (P/N: AFL2P-12AMSR-U-R10) Slim DVD Burner (P/N: 73400-AD7700S01-RS) Bluetooth Module Kit (P/N: AFL2-BT-KIT01-R11) P a g e 48...
  • Page 69 AFL2-W19A/AB-H61 Trusted Platform Module (TPM) (P/N: TPM-IN01-R11) OS: Win CE 6.0 (DVD-ROM) (P/N: AFL2-17A-H61-CE060-R10) OS: Win XPE (DVD-ROM) (P/N: AFL2-17A-H61-XPE-R10) OS: Linux (DVD-ROM) (P/N: AFL2-17A-H61-LNX-R10) OS: Win 7 Embedded (DVD-ROM) (P/N: AFL2-17A-H61-WES7P-R10 AFL2-17A-H61-WES7E-R10) If any of these items are missing or damaged, contact the distributor or sales representative immediately.

  • Page 70: Installation

    AFL2-W19A/AB-H61 Chapter In s ta lla tio n P a g e 50...

  • Page 71: Anti - Static Precautions

    AFL2-W19A/AB-H61 5.1 An ti-s ta tic P re c a u tio n s WARNING: Failure to take ESD precautions during the maintenance of the AFL2-W19A/AB-H61 may result in permanent damage to the AFL2-W19A/AB-H61 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the AFL2-W19A/AB-H61.

  • Page 72: Installation And Configuration Steps

    AFL2-W19A/AB-H61  Anti-static Discharge: If a user open the rear panel of the flat bezel panel PC, to configure the jumpers or plug in added peripheral devices, ground themselves first and wear and anti-static wristband. 5.3 In s ta lla tio n a n d Co n fig u ra tio n Ste ps The following installation steps must be followed.

  • Page 73: Figure 5-1: Hdd Cover Retention Screws

    AFL2-W19A/AB-H61 Figure 5-1: HDD Cover Retention Screws S te p 2: Remove the HDD cover from the device. Loosen the captive screw to release the HDD bracket from the chassis (Figure S te p 3: 5-2). Figure 5-2: HDD Bracket Screw P a g e 53...

  • Page 74: Figure 5-3: Removing The Hdd Bracket

    AFL2-W19A/AB-H61 Slide the HDD bracket out of the device as shown (Figure 5-3). S te p 4: Figure 5-3: Removing the HDD Bracket Insert an HDD into the bracket as shown (Figure 5-4). S te p 5: Figure 5-4: Inserting the HDD Secure the HDD to the bracket using four (4) retention screws (two screws on S te p 6: each side) (Figure 5-5).

  • Page 75: K-Type Temperature Sensor Installation

    AFL2-W19A/AB-H61 Figure 5-5: Securing the HDD S te p 7: Slide the HDD module back into the device. S te p 8: Tighten the captive screw. Replace the HDD cover and secure it using two (2) retention screws. S te p 9: S te p 0: 5.5 K-Typ e Te m p e ra tu re S e n s o r In s ta lla tio n The AFL2-W19A/AB-H61 has a K-type connector on the external peripheral interface...

  • Page 76: Rfid Reader (Optional )

    AFL2-W19A/AB-H61 Figure 5-6: Insert the K-type Temperature Sensor Cable S te p 3: Insert the K-type connector. Gently insert the K-type temperature sensor cable. The connector should engage with a gentle push. 5.6 RFID Re a d e r (Op tio n a l) The AFL2-W19A/AB-H61 series (selected models only) supports RFID reader function.

  • Page 77: Dvd-Rom Installation (Optional )

    AFL2-W19A/AB-H61 S te p 4: Connect the RFID connector of the RFID USB cable to the RFID connector on the motherboard (RFID_USB1). Attach the sticker of the RFID module to the bottom of the panel. S te p 5: Figure 5-8: Install the RFID module S te p 6: Secure the RFID module to the motherboard using two retention screws on either side.

  • Page 78: Figure 5-9: Dvd-Rom Cover

    AFL2-W19A/AB-H61 Figure 5-9: DVD-ROM Cover Remove the DVD-ROM cover. S te p 2: S te p 3: Insert the DVD-ROM to the DVD-ROM bay. Attach the SATA cable to the DVD-ROM and fasten the SATA cable screws (Figure 5-10). Figure 5-10: Install the DVD-ROM P a g e 58...

  • Page 79: At/Atx Mode Selection

    AFL2-W19A/AB-H61 S te p 4: Secure the DVD-ROM to the DVD-ROM bracket using four screws (two screws on each side) (Figure 5-11). Figure 5-11: DVD-ROM Bracket Screws Install the new DVD-ROM cover and fasten four screws on the DVD-ROM cover. S te p 5: The new DVD-ROM cover can be found in the packing list and is shown in Figure 5-12.

  • Page 80: At Power Mode

    AFL2-W19A/AB-H61 Figure 5-13: AT/ATX Switch Location Adjust the AT/ATX switch. S te p 2: 5.8.1 AT P owe r Mo d e With the AT mode selected, the power is controlled by a central power unit rather than a power switch. The AFL2-W19A/AB-H61 panel PC turns on automatically when the power is connected.

  • Page 81: Reset The System

    AFL2-W19A/AB-H61 the clear CMOS switch to clear CMOS mode for a few seconds then reinstall the clear CMOS switch back to keep CMOS mode. S te p 1: Locate the clear CMOS switch on the bottom panel (Figure 5-14). Figure 5-14: Clear CMOS Switch Location Adjust the clear CMOS switch.

  • Page 82: Powering Off The System

    AFL2-W19A/AB-H61 Hold down the Function and Brightness Up buttons for three seconds to power S te p 2: on the system. S te p 0: 5.12 P owe rin g Off th e S ys te m To power off the system, follow the steps below: Locate the Function and Brightness Up function keys.

  • Page 83: Wall Mounting

    AFL2-W19A/AB-H61 5.13.1 Wa ll Mo u n tin g To mount the flat bezel panel PC onto the wall, please follow the steps below. S te p 1: Select the location on the wall for the wall-mounting bracket. S te p 2: Carefully mark the locations of the four screw holes in the bracket on the wall.
  • Page 84 AFL2-W19A/AB-H61 WARNING: Please use the M4 screws provided in the wall mount kit for the rear panel. If the screw is missing, the thread depth of the replacement screw should be not more than 4 mm. Align the mounting screws on the monitor rear panel with the mounting holes on S te p 9: the bracket.

  • Page 85: Figure 5-17: Chassis Support Screws

    AFL2-W19A/AB-H61 Figure 5-17: Chassis Support Screws S te p 11: Secure the panel PC by fastening the retention screw of the wall-mounting bracket. (Figure 5-18). S te p 0: Figure 5-18: Secure the Panel PC P a g e 65...

  • Page 86: Panel Mounting

    AFL2-W19A/AB-H61 5.13.2 P a n e l Mo u n tin g To mount the AFL2-W19A/AB-H61 flat bezel panel PC into a panel, please follow the steps below. S te p 1: Select the position on the panel to mount the flat bezel panel PC. S te p 2: Cut out a section from the panel that corresponds to the rear panel dimensions of the flat bezel panel PC.

  • Page 87: Stand Mounting

    AFL2-W19A/AB-H61 5.13.3 Sta n d Mo u n tin g To mount the AFL2-W19A/AB-H61 using the stand mounting kit, please follow the steps below. S te p 1: Locate the screw holes on the rear of the AFL2-W19A/AB-H61. This is where the bracket will be attached.

  • Page 88: External Peripheral Device Connection

    AFL2-W19A/AB-H61 NOTE: When purchasing the arm please ensure that it is VESA compliant and that the arm has a 100mm x 100mm interface pad. If the mounting arm is not VESA compliant it cannot be used to support the AFL2-W19A/AB-H61 flat bezel panel PC.

  • Page 89: Audio Connection

    AFL2-W19A/AB-H61  Audio devices  HDMI devices  RJ-45 Ethernet cable connector  Serial port devices  USB devices  VGA monitor To install these devices, connect the corresponding cable connector from the actual device to the corresponding AFL2-W19A/AB-H61 external peripheral interface connector making sure the pins are properly aligned.

  • Page 90: Hdmi Device Connection

    AFL2-W19A/AB-H61 Figure 5-22: Audio Connector S te p 3: Check audio clarity. Check that the sound is coming through the right speakers by adjusting the balance front to rear and left to right. 5.14.2 HDMI De vic e Co n n e c tio n The HDMI connector transmits a digital signal to compatible HDMI display devices such as a TV or computer screen.

  • Page 91: Figure 5-23: Hdmi Connection

    AFL2-W19A/AB-H61 Figure 5-23: HDMI Connection S te p 3: Insert the HDMI connector. Gently insert the HDMI connector. The connector should engage with a gentle push. If the connector does not insert easily, check again that the connector is aligned correctly, and that the connector is being inserted with the right way up.

  • Page 92: Lan Connection

    AFL2-W19A/AB-H61 5.14.3 LAN Co n n e c tio n There are two external RJ-45 LAN connectors. The RJ-45 connector enables connection to an external network. To connect a LAN cable with an RJ-45 connector, please follow the instructions below. Locate the RJ-45 connectors.

  • Page 93: Serial Device Connection

    AFL2-W19A/AB-H61 Description Description LAN1_MDI2+ LAN1_MDI2- LAN1_MDI3+ LAN1_MDI3- LAN1_LINK100 LAN1_LINK1000 LAN1_ACT-1 POWER Table 5-2: LAN1 Pinouts Description Description LAN2_MDI0+ LAN2_MDI0- LAN2_MDI1+ LAN2_MDI1- LAN12_MDI2+ LAN2_MDI2- LAN2_MDI3+ LAN2_MDI3- LAN12_LINK100 LAN2_LINK1000 LAN2_ACT-1 POWER Table 5-3: LAN2 Pinouts 5.14.4 S e ria l De vic e Co n n e c tio n There are two external RS-232 DB-9 connectors and one RS-422/485 DB-9 connector for serial device connection.

  • Page 94: Figure 5-25: Db-9 Serial Port Connector

    AFL2-W19A/AB-H61 Figure 5-25: DB-9 Serial Port Connector Secure the connector. Secure the serial device connector to the external S te p 3: interface by tightening the two retention screws on either side of the connector. Step 0: The pinouts of the RS-232 serial ports are shown below. Description Description NDCD1...

  • Page 95: Usb Device Connection

    AFL2-W19A/AB-H61 The pinouts of the RS-422/485 serial ports are shown below. Description Description RXD485+ RXD485# TXD485+ TXD485# Table 5-5: RS-422/485 Serial Port Pinouts (COM3) 5.14.5 US B De vic e Co n n e c tio n NOTE: User must install the USB 3.0 driver before connecting a USB device to the system or else the system may not recognize the connected device.

  • Page 96: Figure 5-26: Usb Device Connection

    AFL2-W19A/AB-H61 Figure 5-26: USB Device Connection Insert the device connector. Once aligned, gently insert the USB device S te p 3: connector into the onboard connector. S te p 0: The pinouts of the USB 2.0 connectors are shown below. Description Description POWER...

  • Page 97: Vga Monitor Connection

    AFL2-W19A/AB-H61 The pinouts of the USB 3.0 connectors are shown below. S te p 1: Description Description USB3_PWR1 USB2P0_DM1_L USB2P0_DP1_L USB3P0_RXDN1_L USB3P0_RXDP1_L USB3P0_TXDN1_C_L USB3P0_TXDP1_C_L USB3_PWR2 USB2P0_DM2_L USB2P0_DP2_L USB3P0_RXDN2_L USB3P0_RXDP2_L USB3P0_TXDN2_C_L USB3P0_TXDP2_C_L Table 5-8: USB 3.0 connectors Pinouts 5.14.6 VGA Mo n ito r Co n n e c tio n The AFL2-W19A/AB-H61 has a single female DB-15 connector on the external peripheral interface panel.

  • Page 98: Figure 5-27: Vga Connector

    AFL2-W19A/AB-H61 Figure 5-27: VGA Connector S te p 4: Secure the connector. Secure the DB-15 VGA connector from the VGA monitor to the external interface by tightening the two retention screws on either side of the connector. The pinouts of the VGA connector is shown below. Description Description CRT_RED...

  • Page 99: System Motherboard

    AFL2-W19A/AB-H61 Chapter S ys te m Mo th e rb o a rd P a g e 79...

  • Page 100: Overview

    AFL2-W19A/AB-H61 6.1 Ove rvie w This chapter details all the jumpers and connectors of the system motherboard. 6.1.1 La yo u t The figures below show all the connectors and jumpers of the system motherboard.. Figure 6-1: Connectors and Jumpers (front) P a g e 80...

  • Page 101: Peripheral Interface Connectors

    AFL2-W19A/AB-H61 Figure 6-2: Connectors and Jumpers (rear) 6.1.2 P e rip h e ra l In te rfa c e Co n n e c to rs The table below lists all the connectors on the board. Co n n e c to r Typ e La b e l Auto-dimming connector...

  • Page 102: Table 6-1: Peripheral Interface Connectors

    AFL2-W19A/AB-H61 Co n n e c to r Typ e La b e l EC debug connector 18-pin header CN15 EC programming connector 6-pin wafer JSPI2 Hotkey connector 9-pin wafer HOTKEYCN1 Hotkey LED connector 8-pin wafer HOTKEYLEDCN1 JSATA connector 20-pin connector JSATA3 K type thermocouple connector 2-pin wafer...

  • Page 103: Internal Peripheral Connectors

    AFL2-W19A/AB-H61 6.2 In te rn a l P e rip h e ra l Co n n e c to rs The section describes all of the connectors on the AFL2-W19A/AB-H61. 6.2.1 Au to -Dim m in g Co n n e c to r CN La b e l: J P 7 10-pin header...

  • Page 104: Battery Connector

    AFL2-W19A/AB-H61 6.2.2 Ba tte ry Co n n e c to r CN La b e l: BAT2 2-pin wafer CN Typ e : CN Lo c a tio n : See Figure 6-4 CN P in o u ts : See Table 6-3 This is connected to the system battery.

  • Page 105: Bluetooth Connector

    AFL2-W19A/AB-H61 The connector is for BIOS programming. Figure 6-5: BIOS Programming Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION SPI_VCC SPI_CS#0_CN SPI_SO0_CN SPI_CLK0_CN SPI_SI0_CN Table 6-4: BIOS Programming Connector Pinouts 6.2.4 Blu e to o th Co n n e c to r CN La b e l: BLUETOOTH1 4-pin wafer...

  • Page 106: Cpu Fan Connector

    AFL2-W19A/AB-H61 Figure 6-6: Bluetooth Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION -DATA9 +DATA9 Table 6-5: Bluetooth Connector Pinouts 6.2.5 CP U Fa n Co n n e c to r CN La b e l: CP U_FAN1 CN Typ e : 4-pin wafer See Figure 6-7 CN Lo c a tio n :...

  • Page 107: Ddr3 So-Dimm Slots

    AFL2-W19A/AB-H61 Figure 6-7: CPU Fan Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION +V12S FANIN1 +V3.3S Table 6-6: CPU Fan Connector Pinouts 6.2.6 DDR3 S O-DIMM S lo ts CN La b e l: DIMM1, DIMM2 DDR3 SO-DIMM slot CN Typ e : See Figure 6-8 CN Lo c a tio n : The DIMM slots are for DDR3 DIMM memory modules.

  • Page 108: Debug Port Connector

    AFL2-W19A/AB-H61 Figure 6-8: DDR3 DIMM Slot Locations 6.2.7 De b u g P o rt Co n n e c to r CN La b e l: DEBUGCN1 CN Typ e : 9-pin header See Figure 6-9 CN Lo c a tio n : See Table 6-7 CN P in o u ts : The debug port connector is for system debug.

  • Page 109: Digital Microphone Connector

    AFL2-W19A/AB-H61 PIN NO. DESCRIPTION PIN NO. DESCRIPTION BUF_PLT_RST# FIN_CLK LPC_AD3 LPC_AD2 LPC_AD1 LPC_AD0 LPC_FRAME# Table 6-7: Debug Port Connector Pinouts 6.2.8 Dig ita l Mic ro p h o n e Co n n e c to r CN La b e l: DMIC1 CN Typ e : 4-pin wafer...

  • Page 110: Ec Debug Connector

    AFL2-W19A/AB-H61 PIN NO. DESCRIPTION PIN NO. DESCRIPTION DMIC_CLK DMIC_DATA VCC3 Table 6-8: Digital Microphone Connector Pinouts 6.2.9 EC De b u g Co n n e c to r CN15 CN La b e l: 18-pin header CN Typ e : CN Lo c a tio n : See Figure 6-11 CN P in o u ts :...

  • Page 111: Ec Programming Connector

    AFL2-W19A/AB-H61 PIN NO. DESCRIPTION PIN NO. DESCRIPTION EC_EPP_PD6 EC_EPP_PE EC_EPP_PD7 EC_EPP_SLCT Table 6-9: Debug Port Connector Pinouts 6.2.10 EC P ro g ra m m in g Con n e c to r CN La b e l: J S P I2 6-pin header CN Typ e : CN Lo c a tio n :...

  • Page 112: Hotkey Connector

    AFL2-W19A/AB-H61 6.2.11 Ho tke y Co n n e c to r CN La b e l: HOTKEYCN1 9-pin wafer CN Typ e : CN Lo c a tio n : See Figure 6-13 CN P in o u ts : See Table 6-11 The hotkey connector connects to the hotkeys on the bottom panel.

  • Page 113: Jsata Connector

    AFL2-W19A/AB-H61 CN Typ e : 8-pin wafer CN Lo c a tio n : See Figure 6-14 See Table 6-12 CN P in o u ts : The hotkey LED connector connects to the hotkey LEDs on the front panel. Figure 6-14: Hotkey LED Connector Location PIN NO.

  • Page 114: K Type Thermocouple Connector

    AFL2-W19A/AB-H61 The JSATA connector connects to the SATA rigid-flex board. Figure 6-15: JSATA Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION +V12S +V12S +V5S SATA20_PRX_C_DTX_P3 +V5S SATA20_PRX_C_DTX_N3 +V5S +V5S SATA20_PRX_C_DRX_P3 SATA20_PRX_C_DRX_N3 +V3.3S +V3.3S Table 6-13: JSATA Connector Pinouts 6.2.14 K Typ e Th e rm o c o u p le Co n n e c to r CN La b e l: CN13, CN14 2-pin wafer...

  • Page 115: Figure 6-16: K Type Thermocouple Connector Location

    AFL2-W19A/AB-H61 CN Lo c a tio n : See Figure 6-16 CN P in o u ts : See Table 6-14 The K type thermocouple connector connects to the K type thermocouple. CN13 connects to the temperature sensor and CN14 connects to the K-type connector on the bottom panel.

  • Page 116: Lvds Connector

    AFL2-W19A/AB-H61 PIN NO. DESCRIPTION PIN NO. DESCRIPTION D1-/D2- D1+/D2+ Table 6-14: K Type Thermocouple Connector Pinouts 6.2.15 LVDS Co n n e c to r CN La b e l: LVDS 1 30-pin crimp CN Typ e : See Figure 6-18 CN Lo c a tio n : CN P in o u ts : See Table 6-15...

  • Page 117: Lvds Backlight Inverter Connector

    AFL2-W19A/AB-H61 CLK1P_C CLK1M_C A3P_C A3M_C A4P_C A4M_C A5P_C A5M_C A6P_C A6M_C CLK2P_C CLK2M_C A7P_C A7M_C Table 6-15: LVDS Connector Pinouts 6.2.16 LVDS Ba c klig h t In ve rte r Co n n e c to r CN La b e l: INVERTER1 6-pin wafer CN Typ e :...

  • Page 118: Led Connector

    AFL2-W19A/AB-H61 Figure 6-19: LVDS Backlight Inverter Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION BKL_POWER BKL_POWER ENABKL BRIGHTNESS Table 6-16: LVDS Backlight Inverter Connector Pinouts 6.2.17 LED Co n n e c to r CN La b e l: LEDCN1 16-pin header CN Typ e : See Figure 6-20...

  • Page 119: Light Bar Connectors

    AFL2-W19A/AB-H61 Figure 6-20: LED Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION AUDIO_LED# PWRLED01# MIC_LED# PWRLED02# CPU_LED02# AT_LED# CPU_LED01# ATX_LED# AD_LED# +V3.3S WiFi_LED# +V3.3S BT_LED# +V3.3A_EC VCC_RFID GROUND Table 6-17: LED Connector Pinouts 6.2.18 Lig h t Ba r Co n n e c to rs CN La b e l: CN1, CN2, CN3, CN4 6-pin wafer...

  • Page 120: Logo Led Connector

    AFL2-W19A/AB-H61 The Light bar connectors connect to the LED bar module. Figure 6-21: LED Bar Connectors Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION SMBCLK_MAIN SMBDATA_MAIN +V5S Table 6-18: LED Bar Connectors Pinouts 6.2.19 LOGO LED Co n n e c tor CN La b e l: LOGO_LED 2-pin wafer...

  • Page 121: Mini Usb Connector

    AFL2-W19A/AB-H61 Figure 6-22: LOGO LED Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION +V3.3S Table 6-19: LOGO LED Connector Pinouts 6.2.20 Min i US B Co n n e c to r CN La b e l: MINUS B1, MINUS B2 CN Typ e : 4-pin wafer See Figure 6-23, Figure 6-24...

  • Page 122: Figure 6-23: Mini Usb Connector Location (Minusb2)

    AFL2-W19A/AB-H61 Figure 6-23: Mini USB Connector Location (MINUSB2) Figure 6-24: Mini USB Connector Location (MINUSB1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION -DATA4 +DATA4 Table 6-20: Mini USB Connector Pinouts (MINUSB2) P a g e 102...

  • Page 123: Pcie Mini Card Slot

    AFL2-W19A/AB-H61 PIN NO. DESCRIPTION PIN NO. DESCRIPTION -DATA8 +DATA8 3VCC Table 6-21: Mini USB Connector Pinouts (MINUSB1) 6.2.21 P CIe Min i Ca rd S lo t CN La b e l: MINI_P CIE1, MINI_P CIE2 PCIe Mini card slot CN Typ e : See Figure 6-25 CN Lo c a tio n :...

  • Page 124: Power Button Connector

    AFL2-W19A/AB-H61 6.2.22 P owe r Bu tto n Co n n e c to r CN La b e l: P W_BT1 2-pin wafer CN Typ e : CN Lo c a tio n : See Figure 6-26 CN P in o u ts : See Table 6-22 The power button connector connects to the power button on the bottom panel.

  • Page 125: Sata 3Gb/S Drive Connectors

    AFL2-W19A/AB-H61 The RFID connector connects to a RFID module. Figure 6-27: RFID Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION -DATA5 +DATA5 Table 6-23: RFID Connector Pinouts 6.2.24 S ATA 3Gb /s Drive Co n n e c to rs CN La b e l: S ATA1 7-pin SATA connector...

  • Page 126: Sata Power Connector

    AFL2-W19A/AB-H61 Figure 6-28: SATA 3Gb/s Drive Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION SATA20_PTX_P0 SATA20_PTX_N0 SATA20_PRX_N0 SATA20_PRX_P0 Table 6-24: SATA 3Gb/s Drive Connector Pinouts 6.2.25 S ATA P o we r Co n n e c to r CN La b e l: CN Typ e : 2-pin wafer CN Lo c a tio n :...

  • Page 127: Speaker Connector

    AFL2-W19A/AB-H61 Figure 6-29: SATA Power Connector Locations PIN NO. DESCRIPTION PIN NO. DESCRIPTION +V5S Table 6-25: SATA Power Connector Pinouts 6.2.26 S p e a ke r Co n n e c to r CN La b e l: S P K_CN13 4-pin wafer CN Typ e : CN Lo c a tio n :...

  • Page 128: Touch Panel Connector (5-Wire Resistive Type)

    AFL2-W19A/AB-H61 Figure 6-30: Speaker Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION SPK_L Analog_GND Analog_GND SPK_R Table 6-26: Speaker Connector Pinouts 6.2.27 To u c h p a n e l c o n n e c to r (5-wire re s is tive typ e ) CN La b e l: TS 1 9-pin wafer...

  • Page 129: Touch Panel Connector (Projected Capacitive Type)

    AFL2-W19A/AB-H61 Figure 6-31: Touch Panel Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION -DATA1 +DATA1 Table 6-27: Touch Panel Connector Pinouts 6.2.28 To u c h p a n e l c o n n e c to r (p ro je c te d c a pa c itive typ e ) CN La b e l: TOUCH1 4-pin wafer...

  • Page 130: Tpm Connector

    AFL2-W19A/AB-H61 Figure 6-32: Touch Panel Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION SENSE Table 6-28: Touch Panel Connector Pinouts 6.2.29 TP M Co n n e c to r CN La b e l: TPM1 20-pin header CN Typ e : See Figure 6-33 CN Lo c a tio n : CN P in o u ts :...

  • Page 131: Web Camera Connector

    AFL2-W19A/AB-H61 Figure 6-33: TPM Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION TPMPCLK LPC_FRAME# BUF_PLT_RST# +V5S LPC_AD3 LPC_AD2 +V3.3S LPC_AD1 LPC_AD0 SMBCLK_MAIN SMBDATA_MAIN +V3.3A INT_SERIRQ PM_CLKRUN# PM_SUS_STAT# SIO_DRQ#0 Table 6-29: TPM Connector Pinouts 6.2.30 We b Ca m e ra Co n n e c to r CN La b e l: WEBCAMER1 4-pin wafer...

  • Page 132: Figure 6-34: Web Camera Connector Location

    AFL2-W19A/AB-H61 The web camera connector connects to the web camera on the front panel. Figure 6-34: Web Camera Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION -DATA10 +DATA10 Table 6-30: Web Camera Connector Pinouts P a g e 112...

  • Page 133: Jumper Settings

    AFL2-W19A/AB-H61 6.3 J u m p e r S e ttin g s NOTE: A jumper is a metal bridge used to close an electrical circuit. It consists of two or three metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.

  • Page 134: Lcd Panel Selection

    AFL2-W19A/AB-H61 PIN NO. DESCRIPTION Short 1-2 +3.3 V Short 2-3 +5 V (Default) Table 6-32: LVDS Voltage Selection Jumper Settings Figure 6-35: LVDS Voltage Selection Jumper Location 6.3.2 LCD pa n e l s e le c tio n DJ3, DJ4, DJ5, DJ6 J u m p e r La b e l: 3-pin header J u m p e r Typ e :...

  • Page 135: Figure 6-36: Lcd Panel Selection Jumper Location

    AFL2-W19A/AB-H61 Figure 6-36: LCD panel Selection Jumper Location P a g e 115...

  • Page 136: System Maintenance

    AFL2-W19A/AB-H61 Chapter S ys te m Ma in te n a n c e P a g e 116...

  • Page 137: System Maintenance Introduction

    AFL2-W19A/AB-H61 7.1 S ys te m Ma in te n a n c e In tro d u c tio n If the components of the AFL2-W19A/AB-H61 fail they must be replaced. Components that can be replaced include:  SO-DIMM module ...

  • Page 138: Turn Off The Power

    AFL2-W19A/AB-H61 7.3 Tu rn o ff th e P owe r WARNING: Failing to turn off the system before opening it can cause permanent damage to the system and serious or fatal injury to the user. Before any maintenance procedures are carried out on the system, make sure the system is turned off.

  • Page 139: Removing The Internal Aluminum Cover

    AFL2-W19A/AB-H61 Figure 7-1: Back Cover Retention Screws S te p 4: Carefully separate the back cover from the chassis and lift the cover clear of the device S te p 0: 7.4.2 Re m o vin g th e In te rn a l Alu m in u m Co ve r To remove the internal aluminum cover, follow the steps below.

  • Page 140: Replacing Components

    AFL2-W19A/AB-H61 S te p 2: Lift the aluminum cover off the AFL2-W19A/AB-H61. The internal parts will all be viewable. S te p 3: Figure 7-3: Internal Components 7.5 Re p la c in g Co m p o n e n ts 7.5.1 Me m o ry Mo d u le Re p la c e m e n t The flat bezel panel PC is preinstalled with two 2.0 GB DDR3 memory module.

  • Page 141: Wlan Card Replacement

    AFL2-W19A/AB-H61 S te p 8: Install the new DDR3 memory module by pushing it into the socket at an angle (Figure 7-4). Gently pull the spring retainer clips of the SO-DIMM socket out and push the S te p 9: rear of the DDR memory module down (Figure 7-4).

  • Page 142: Figure 7-5: Removing The Antennas

    AFL2-W19A/AB-H61 S te p 5: Locate the WLAN card. Disconnect the main and auxiliary antennas on the WLAN module (Figure 7-5). S te p 6: Figure 7-5: Removing the Antennas S te p 7: Push the two spring clips in to release the WLAN card. Figure 7-6: Releasing the WLAN Card S te p 8: Grasp the WLAN card by the edges and carefully pull it out of the socket (Figure...

  • Page 143: Figure 7-7: Removing The Wlan Card

    AFL2-W19A/AB-H61 Figure 7-7: Removing the WLAN card Install a new WLAN card by inserting the card into the slot at an angle S te p 9: S te p 10: Push the WLAN card down until the spring retainer clips lock into place. S te p 11: Connect the main (1) and auxiliary (2) antennas.

  • Page 144: Reinstalling The Covers

    AFL2-W19A/AB-H61 S te p 12: Replace the internal aluminum cover and secure it to the chassis using seven (7) retention screws. Replace the back cover and secure it using fourteen (14) previously removed S te p 13: retention screws. S te p 0: 7.6 Re in s ta llin g th e Co ve rs WARNING: Failing to reinstall the covers may result in permanent damage to the...

  • Page 145: Bios Setup

    AFL2-W19A/AB-H61 Chapter BIOS S e tu p P a g e 125...

  • Page 146: Introduction

    AFL2-W19A/AB-H61 8.1 In tro d u c tio n A licensed copy of the BIOS is preprogrammed into the ROM BIOS. The BIOS setup program allows users to modify the basic system configuration. This chapter describes how to access the BIOS setup program and the configuration options that may be changed.

  • Page 147: Getting Help

    AFL2-W19A/AB-H61 F2 key Load previous values. F3 key Load optimized defaults F4 key Save changes and Exit BIOS Esc key Main Menu – Quit and do not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu -- Exit current page and return to Main Menu Table 8-1: BIOS Navigation Keys 8.1.3 Ge ttin g He lp...

  • Page 148: Main

    AFL2-W19A/AB-H61 8.2 Ma in The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset...

  • Page 149: Advanced

    AFL2-W19A/AB-H61  iWDD Ve rs io n  The iWDD Version displays the current iWDD version. The fields in iWDD Version cannot be changed.  Me m o ry In fo rm a tio n The Memory Information lists a brief summary of the on-board memory. The fields in Memory Information cannot be changed.

  • Page 150: Acpi Settings

    AFL2-W19A/AB-H61 Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit > ACPI Settings System ACPI Parameters. > RTC Wake Settings > Trusted Computing > CPU Configuration > SATA Configuration ---------------------- > Intel TXT(LT) Configuration : Select Screen >...

  • Page 151: Rtc Wake Settings

    AFL2-W19A/AB-H61  ACP I S le e p Sta te [S 1 (CP U Sto p Clo c k)] Use the ACPI Sleep State option to specify the sleep state the system enters when it is not being used.  Suspend function disabled.

  • Page 152: Trusted Computing

    AFL2-W19A/AB-H61 Use the Wake system with Fixed Time option to enable or disable the system wake on alarm event.  Disabled The real time clock (RTC) cannot generate a wake EFAULT event  Enabled If selected, the Wake up every day option appears allowing you to enable to disable the system to wake every day at the specified time.

  • Page 153: Cpu Configuration

    AFL2-W19A/AB-H61 Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced TPM Configuration Enables or Disables TPM TPM SUPPORT [Disable] support. O.S. will not show TPM. Reset of Current TPM Status Information platform is required. NO TPM Hardware ---------------------- : Select Screen ↑...

  • Page 154: Cpu Information

    AFL2-W19A/AB-H61 Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced CPU Configuration Socket specific CPU Information > CPU Information Hyper-threading [Enabled] ---------------------- Active Processor Cores [All] : Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt. General Help Previous Values Optimized Defaults...

  • Page 155: Bios Menu 7: Cpu Configuration

    AFL2-W19A/AB-H61 Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced CPU Information Intel(R) Core(TM) i3-2100T CPU @ 2.50GHz CPU Signature 206a7 ---------------------- Microcode Patch Max CPU Speed 2500 MHz : Select Screen Min CPU Speed 1600 MHz ↑ ↓: Select Item Processor Cores Intel HT Technology Supported...

  • Page 156: Sata Configuration

    AFL2-W19A/AB-H61 8.3.5 S ATA Co n fig u ra tio n Use the SATA Configuration menu (BIOS Menu 8) to change and/or set the configuration of the SATA devices installed in the system. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced SATA Configuration Enable/Disable IDE Mode.

  • Page 157: Intel Txt (Lt) Configuration

    AFL2-W19A/AB-H61  Configures the Serial-ATA controller to be in compatible Compatible EFAULT mode. In this mode, a SATA channel will replace one of the IDE channels.  S e ria l-ATA Co n tro lle r 1 [En h a n c e d ] Use the Serial-ATA Controller 1 option to configure the Serial-ATA controller mode when the SATA mode is set to IDE Mode.

  • Page 158: Usb Configuration

    AFL2-W19A/AB-H61 8.3.7 US B Co n fig u ra tio n Use the USB Configuration menu (BIOS Menu 10) to read USB configuration information and configure the USB settings. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced USB Configuration USB Support Parameters USB Devices:...
  • Page 159 AFL2-W19A/AB-H61 keyboard can control the system even when there is no USB driver loaded onto the system.  Enabled Legacy USB support enabled EFAULT  Disabled Legacy USB support disabled  Auto Legacy USB support disabled if no USB devices are connected ...

  • Page 160: F81216 Super Io Configuration

    AFL2-W19A/AB-H61 8.3.8 F81216 S u pe r IO Co nfig u ra tio n Use the F81216 Super IO Configuration menu (BIOS Menu 11) to set or change the configurations for the FDD controllers, parallel ports and serial ports. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced F81216 Super IO Configuration Set Parameters of Serial...
  • Page 161 AFL2-W19A/AB-H61 8.3.8.1.1 S e ria l P o rt 1 Co n fig u ra tio n  S e ria l P o rt [En a b le d ] Use the Serial Port option to enable or disable the serial port. ...
  • Page 162 AFL2-W19A/AB-H61  Enable the serial port Enabled EFAULT  Ch a n g e S e ttin g s [Au to ] Use the Change Settings option to change the serial port IO port address and interrupt address.  Auto The serial port IO port address and interrupt EFAULT address are automatically detected.
  • Page 163 AFL2-W19A/AB-H61  The serial port IO port address and interrupt Auto EFAULT address are automatically detected.  IO=3E8h; IRQ=7 Serial Port I/O port address is 3E8h and the interrupt address is IRQ7  IO=3F8h; IRQ=3, Serial Port I/O port address is 3F8h and the 4,5,6,7,10,11,12 interrupt address is IRQ3, 4, 5, 6, 7, 10, 11, 12 ...

  • Page 164: H/W Monitor

    AFL2-W19A/AB-H61 8.3.9 H/W Mo n ito r The H/W Monitor menu (BIOS Menu 13) shows the hardware health status. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced CPU Temperature :+62 C The Temperature of Environment Temperature 1 :+29 C Fanless can be set after Environment Temperature 2...
  • Page 165 AFL2-W19A/AB-H61  Enables the Fanless Temp. Overwrite control function. Enabled  Disabled Disables the Fanless Temp. Overwrite control function. EFAULT  Te m p e ra tu re Of Fa n le s s [32 C] NOTE: If the Temperature of Fanless is enabled, the fan will only turn on when the Environment Temperature 1 reaches to the temperature set in the following Temperature of Fanless option.

  • Page 166: Serial Port Console Redirection

    AFL2-W19A/AB-H61  When the environment temperature is lower than 24 C, 24 C the fan will be switched off.  28 C When the environment temperature is lower than 28 C, the fan will be switched off.  32 C When the environment temperature is lower than 32 C, EFAULT the fan will be switched off.

  • Page 167: I E I Feature

    AFL2-W19A/AB-H61  Disabled the console redirection function Disabled EFAULT  Enabled Enabled the console redirection function 8.4 iEi Fe a tu re Use the iEi Feature menu (BIOS Menu 15) to configure the auto recovery function. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced iEi Feature Auto Recovery Function...

  • Page 168: Chipset

    AFL2-W19A/AB-H61  Mic ro S D Ca rd [En a b le d ] Use the Micro SD Card BIOS option to enable or disable the micro SD card. Once to run One Key Recovery function, disable the micro SD card firstly. ...

  • Page 169: Northbridge Configuration

    AFL2-W19A/AB-H61 8.5.1 No rth b rid g e Co n fig u ra tio n Use the North Bridge menu (BIOS Menu 17) to configure the Northbridge chipset. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Chipset Memory Information Select which graphics controller to use as the Total Memory...

  • Page 170: Southbridge Configuration

    AFL2-W19A/AB-H61  32 MB of memory used by internal graphics device  64 MB of memory used by internal graphics device EFAULT  128M 128 MB of memory used by internal graphics device  256M 256 MB of memory used by internal graphics device ...

  • Page 171: Bios Menu 18: Southbridge Chipset Configuration

    AFL2-W19A/AB-H61 Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Chipset Auto Power Button Status [OFF] Specify what state to go to when power is Restore AC Power Loss [Last State] re-applied after a power Power Saving Function [Disabled] failure (G3 state).
  • Page 172 AFL2-W19A/AB-H61  WIFI Fu n c tio n [En a b le d ] Use the WIFI Function option to enable or disable the Wi-Fi function.  Wi-Fi function disabled Disabled  Enabled Wi-Fi function enabled EFAULT  DMIC Fu n c tio n [En a b le d ] Use the DMIC Function option to enable or disable the Microphone function.
  • Page 173 AFL2-W19A/AB-H61  Aza lia HD Au d io [En a b le d ] Use the Azalia HD Audio option to enable or disable the High Definition Audio controller.  The onboard High Definition Audio controller is disabled Disabled  Enabled The onboard High Definition Audio controller is detected EFAULT...

  • Page 174: Integrated Graphics

    AFL2-W19A/AB-H61  The onboard PCIe LAN controller 2 is enabled Enabled EFAULT  P CIe US B 3.0 Co n tro lle r [En a b le d ] Use the PCIe USB 3.0 Controller BIOS option to enable or disable the PCIe USB 3.0 controller.

  • Page 175: Me Subsystem

    AFL2-W19A/AB-H61  DVMT Mo d e S e le c t [DVMT Mo d e ] Use the DVMT Mode Select option to select the Intel Dynamic Video Memory Technology (DVMT) operating mode.  A fixed portion of graphics memory is reserved as Fixed Mode graphics memory.

  • Page 176: Bios Menu 20: Me Subsystem

    AFL2-W19A/AB-H61 Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Chipset Intel ME Subsystem Configuration MEBx Mode Help ME Version 7.0.10.1203 --------------------- : Select Screen MEBx Mode [Normal] ↑ ↓: Select Item Unconfigure AMT/ME [Disabled] Enter Select Change Opt. General Help Previous Values Optimized Defaults...

  • Page 177: Boot

    AFL2-W19A/AB-H61 8.6 Bo o t Use the Boot menu (BIOS Menu 21) to configure system boot options. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Boot Configuration Select the keyboard Bootup NumLock State [On] NumLock state...
  • Page 178 AFL2-W19A/AB-H61  Qu ie t Bo o t [En a b le d ] Use the Quiet Boot BIOS option to select the screen display when the system boots.  Normal POST messages displayed Disabled  Enabled OEM Logo displayed instead of POST messages EFAULT ...

  • Page 179: Security

    AFL2-W19A/AB-H61 8.7 S e c u rity Use the Security menu (BIOS Menu 22) to set system and user passwords. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Password Description Set Setup Administrator Password If ONLY the Administrator’s password is set,...

  • Page 180: Save & Exit

    AFL2-W19A/AB-H61 8.8 S a ve & Exit Use the Save & Exit menu (BIOS Menu 23) to load default BIOS values, optimal failsafe values and to save configuration changes. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot...
  • Page 181 AFL2-W19A/AB-H61  S a ve a s Us e r De fa u lts Use the Save as User Defaults option to save the changes done so far as user defaults.  Re s to re Us e r De fa u lts Use the Restore User Defaults option to restore the user defaults to all the setup options.

  • Page 182: Software Drivers

    AFL2-W19A/AB-H61 Chapter S o ftwa re Drive rs P a g e 162...

  • Page 183: Available Software Drivers

    AFL2-W19A/AB-H61 P a n e l P C 9.1 Ava ila b le S o ftwa re Drive rs NOTE: The content of the CD may vary throughout the life cycle of the product and is subject to change without prior notice. Visit the IEI website or contact technical support for the latest updates.

  • Page 184: Chipset Driver Installation

    AFL2-W19A/AB-H61 P a n e l P C Figure 9-1: Drivers 9.3 Ch ips e t Drive r In s ta lla tio n To install the chipset driver, please do the following. S te p 1: Access the driver list. (See Section 9.2) S te p 2: Click “Chipset.”...

  • Page 185: Figure 9-2: Chipset Driver Screen

    AFL2-W19A/AB-H61 P a n e l P C Figure 9-2: Chipset Driver Screen S te p 5: When the setup files are completely extracted the Welcome Screen in Figure 9-3 appears. S te p 6: Click Next to continue. Figure 9-3: Chipset Driver Welcome Screen P a g e 165...

  • Page 186: Figure 9-4: Chipset Driver License Agreement

    AFL2-W19A/AB-H61 P a n e l P C The license agreement in Figure 9-4 appears. S te p 7: Read the License Agreement. S te p 8: Click Yes to continue. S te p 9: Figure 9-4: Chipset Driver License Agreement The Read Me file in Figure 9-5 appears.

  • Page 187: Figure 9-5: Chipset Driver Read Me File

    AFL2-W19A/AB-H61 P a n e l P C Figure 9-5: Chipset Driver Read Me File S te p 12: Setup Operations are performed as shown in Figure 9-6. Once the Setup Operations are complete, click Next to continue. S te p 13: Figure 9-6: Chipset Driver Setup Operations The Finish screen in Figure 9-7 appears.

  • Page 188: Graphics Driver Installation

    AFL2-W19A/AB-H61 P a n e l P C Select “Yes, I want to restart this computer now” and click Finish.S te p 0: S te p 15: Figure 9-7: Chipset Driver Installation Finish Screen 9.4 Gra p h ic s Drive r In s ta lla tio n To install the Graphics driver, please do the following.

  • Page 189: Figure 9-8: Graphics Driver Read Me File

    AFL2-W19A/AB-H61 P a n e l P C Figure 9-8: Graphics Driver Read Me File S te p 6: The installation files are extracted. See Figure 9-9. Click Next to continue. S te p 7: Figure 9-9: Graphics Driver Setup Files Extracted The Welcome Screen in Figure 9-10 appears.

  • Page 190: Figure 9-10: Graphics Driver Welcome Screen

    AFL2-W19A/AB-H61 P a n e l P C Click Next to continue. S te p 9: Figure 9-10: Graphics Driver Welcome Screen The License Agreement in Figure 9-11 appears. S te p 10: Click Yes to accept the agreement and continue. S te p 11: Figure 9-11: Graphics Driver License Agreement P a g e 170...

  • Page 191: Figure 9-12: Graphics Driver Read Me File

    AFL2-W19A/AB-H61 P a n e l P C The Read Me file in Figure 9-12 appears. S te p 12: Click Next to continue. S te p 13: Figure 9-12: Graphics Driver Read Me File Setup Operations are performed as shown in Figure 9-13. S te p 14: Once the Setup Operations are complete, click Next to continue.

  • Page 192: Figure 9-13: Graphics Driver Setup Operations

    AFL2-W19A/AB-H61 P a n e l P C Figure 9-13: Graphics Driver Setup Operations S te p 16: The Finish Screen in Figure 9-14 appears. Select “Yes, I want to restart this computer now” and click Finish.S te p 0: S te p 17: Figure 9-14: Graphics Driver Installation Finish Screen P a g e 172...

  • Page 193: Touch Screen Driver

    AFL2-W19A/AB-H61 P a n e l P C 9.5 To u c h S c re e n Drive r To install the touch panel software driver, please follow the steps below. S te p 1: Access the driver list. (See Section 9.2) Click “Touch Screen.”...

  • Page 194: Figure 9-16: Touch Screen Driver License Agreement

    AFL2-W19A/AB-H61 P a n e l P C Figure 9-16: Touch Screen Driver License Agreement S te p 8: Browse for an install location or use the one suggested (Figure 9-17). Click I to continue. S te p 9: NS TALL Figure 9-17: Touch Screen Driver Choose Install Location P a g e 174...

  • Page 195: Figure 9-18: Touch Screen Driver Installation Screen

    AFL2-W19A/AB-H61 P a n e l P C The Install screen appears and displays the progress of the installation (Figure S te p 10: 9-18). S te p 11: Click N to continue. Figure 9-18: Touch Screen Driver Installation Screen S te p 12: When the installation is complete, click F to exit setup.

  • Page 196: Calibrating The Touch Screen

    AFL2-W19A/AB-H61 P a n e l P C 9.5.1 Ca lib ra tin g th e To uc h S c re e n To calibrate the touch screen cursor with the motion of the touch screen pen (or finger), please follow the steps below: S te p 1: Make sure the touch screen driver is properly installed.

  • Page 197: Figure 9-22: Configuration Screen

    AFL2-W19A/AB-H61 P a n e l P C Figure 9-22: Configuration Screen S te p 6: Double click the PenMount 9000 icon as shown in Figure 9-22. The calibration initiation screen in Figure 9-23 appears. S te p 7: Select the Standard Calibration button as shown in Figure 9-23. S te p 8: Figure 9-23: Calibration Initiation Screen P a g e 177...

  • Page 198: Audio Driver Installation

    AFL2-W19A/AB-H61 P a n e l P C The calibration screen in is shown. See Figure 9-24. S te p 9: Figure 9-24: Calibration Screen S te p 10: Follow the instructions. The user is asked touch the screen at five specified points after which the screen is calibrated.

  • Page 199: Figure 9-25: Audio Driver Welcome Screen

    AFL2-W19A/AB-H61 P a n e l P C Figure 9-25: Audio Driver Welcome Screen The audio driver installation begins. See Figure 9-26. S te p 6: Figure 9-26: Audio Driver Installation P a g e 179...

  • Page 200: Lan Driver Installation

    AFL2-W19A/AB-H61 P a n e l P C When the installation is complete, the screen in Figure 9-27 appears. S te p 7: Select “Yes, I want to restart my computer now” and click Finish. S te p 8: S te p 0: Figure 9-27: Audio Driver Installation Complete 9.7 LAN Drive r In s ta lla tio n To install the LAN driver, please do the following.

  • Page 201: Figure 9-28: Lan Driver Welcome Screen

    AFL2-W19A/AB-H61 P a n e l P C Figure 9-28: LAN Driver Welcome Screen S te p 5: Click Next to continue. The Ready to Install the Program Screen in Figure 9-29 appears. S te p 6: Click Install to proceed with the installation. S te p 7: Figure 9-29: LAN Driver Ready to Install Screen The program begins to install.

  • Page 202: Figure 9-30: Lan Driver Setup Status Screen

    AFL2-W19A/AB-H61 P a n e l P C The Setup Status screen in Figure 9-30 appears. S te p 9: Figure 9-30: LAN Driver Setup Status Screen When the driver installation is complete, the screen in Figure 9-31 appears. S te p 10: Click Finish to exit.

  • Page 203: Intel ® Management Engine Components Installation

    AFL2-W19A/AB-H61 P a n e l P C 9.8 In te l® Ma n a g e m e n t En g in e Co m p o n e n ts In s ta lla tio n The package of the Intel® ME components includes ...

  • Page 204: Figure 9-33: Intel® Me Driver License Agreement

    AFL2-W19A/AB-H61 P a n e l P C Read the License Agreement. S te p 7: Click Yes to continue. S te p 8: Figure 9-33: Intel® ME Driver License Agreement The Read Me file in Figure 9-34 appears. S te p 9: Click Next to continue.

  • Page 205: Figure 9-35: Intel® Me Driver Setup Operations

    AFL2-W19A/AB-H61 P a n e l P C Setup Operations are performed as shown in Figure 9-35. S te p 11: Once the Setup Operations are complete, click Next to continue. S te p 12: Figure 9-35: Intel® ME Driver Setup Operations The Finish screen in Figure 9-36 appears.

  • Page 206: Usb 3.0 Driver Installation

    AFL2-W19A/AB-H61 P a n e l P C 9.9 US B 3.0 Drive r In s ta lla tio n To install the touch panel software driver, please follow the steps below. S te p 1: Access the driver list. (See Section 9.2) Click “USB 3.0”.

  • Page 207: Figure 9-38: Usb 3.0 Driver License Agreement

    AFL2-W19A/AB-H61 P a n e l P C Figure 9-38: USB 3.0 Driver License Agreement to continue. S te p 8: Click N Figure 9-39: USB 3.0 Driver Installation The Install screen appears and displays the progress of the installation. S te p 9: When the installation is complete, click Finish to exit setup.

  • Page 208: W I -F I Driver Installation

    AFL2-W19A/AB-H61 P a n e l P C Figure 9-40: USB 3.0 Driver Update Complete 9.10 Wi-Fi Drive r In s ta lla tio n To install the wireless LAN driver, please follow the steps below. S te p 1: Access the driver list.

  • Page 209: Figure 9-41: License Agreement

    AFL2-W19A/AB-H61 P a n e l P C Figure 9-41: License Agreement S te p 4: Accept the conditions of the license agreement and click NEXT to continue. The Setup Type screen in Figure 9-42 appears. S te p 5: Figure 9-42: Setup Type Select “Install driver and Ralink WLAN Utility”...

  • Page 210: Figure 9-43: Configuration Tool

    AFL2-W19A/AB-H61 P a n e l P C The Configuration Tool screen in Figure 9-43 appears. S te p 7: Figure 9-43: Configuration Tool Select “Ralink Configuration Tool”and click NEXT to continue. S te p 8: The Ready to Install the Program screen in Figure 9-44 appears. S te p 9: Figure 9-44: Ready to Install the Program P a g e 190...

  • Page 211: Figure 9-45: Setup Status

    AFL2-W19A/AB-H61 P a n e l P C Click Install to proceed with the installation. S te p 10: The Setup Status screen in Figure 9-45 appears and displays the progress of S te p 11: the installation. Figure 9-45: Setup Status S te p 12: When the driver installation is complete, the screen in Figure 9-46 appears.

  • Page 212: Led Bar Driver Installation

    AFL2-W19A/AB-H61 P a n e l P C Figure 9-46: Installation Complete Click FINISH to complete installation. S te p 13: 9.11 LED Ba r Drive r Ins ta lla tio n To install the LED bar driver, please do the following. S te p 1: Access the driver list shown in Figure 9-1 (See Section 9.2).

  • Page 213: Figure 9-47: The Installshield Wizard Starts

    AFL2-W19A/AB-H61 P a n e l P C Figure 9-47: The InstallShield Wizard Starts The Welcome screen in Figure 9-48 appears. S te p 5: Figure 9-48: Welcome Screen Click Next to continue. S te p 6: S te p 7: The Ready to Install screen in Figure 9-49 appears.

  • Page 214: Figure 9-49: Ready To Install

    AFL2-W19A/AB-H61 P a n e l P C Figure 9-49: Ready to Install S te p 9: The program begins to install. S te p 10: The installation progress can be monitored in the progress bar shown in Figure 9-50. Figure 9-50: Installation When the driver installation is complete, the screen in Figure 9-51 appears.

  • Page 215: Amc Ap Driver Installation

    AFL2-W19A/AB-H61 P a n e l P C Figure 9-51: Installation Complete S te p 12: Click F to complete the installation. INISH S te p 13: You must restart your system for the configuration changes made to SMBAPI to take effect.

  • Page 216: Figure 9-52: Amcap Driver Welcome Screen

    AFL2-W19A/AB-H61 P a n e l P C Figure 9-52: AMCap Driver Welcome Screen S te p 6: Browse for an install location or use the one suggested (Figure 9-53). Click I to continue. S te p 7: NS TALL Figure 9-53: AMCap Driver Choose Install Location The program begins to install.

  • Page 217: Figure 9-54: Amcap Driver Installation Complete

    AFL2-W19A/AB-H61 P a n e l P C When the driver installation is complete, the screen in Figure 9-54 appears. S te p 9: Click Finish to save and exit. S te p 10: S te p 0: Figure 9-54: AMCap Driver Installation Complete P a g e 197...

  • Page 218: Cooling Management Console (Icmc)

    AFL2-W19A/AB-H61 P a n e l P C Chapter Co o lin g Ma n a g e m e n t Co n s o le (iCMC) P a g e 198...

  • Page 219: Overview

    AFL2-W19A/AB-H61 P a n e l P C 10.1 Ove rvie w The iCMC system cooling management console tracks system and CPU temperatures, frequency, cooling fan speeds, and allows users to configure light fanless settings. The iCMC quickly captures and reports system conditions to ensure operators can prevent system damage.

  • Page 220: Figure 10-2: Select Installation Folder

    AFL2-W19A/AB-H61 P a n e l P C Select a folder for Cooling Management Console installation in Figure 10-2. S te p 4: Click Next to continue. Figure 10-2: Select Installation Folder S te p 5: The following screen appears. Click Next to confirm the installation. Figure 10-3: Confirm Installation P a g e 200...

  • Page 221: Figure 10-4: Installation Complete

    AFL2-W19A/AB-H61 P a n e l P C S te p 6: The system starts installing the Cooling Management Console. When the Cooling Management Console is successfully installed, the following S te p 7: window appears. Click Close to exit. Figure 10-4: Installation Complete S te p 8: The confirmation screen offers the option of restarting the system now or later.

  • Page 222: Icmc Overview

    AFL2-W19A/AB-H61 P a n e l P C Figure 10-6: Cooling Management Console Icon 10.2 iCMC Ove rview Figure 10-7 shows the iCMC interface. The iCMC interface is consisted of two panels: information panel (left) and chart panel (right). The chart panel can be hidden by selecting Chart visible option to “Off”.

  • Page 223: Figure 10-8: Icmc Information Panel

    AFL2-W19A/AB-H61 P a n e l P C Figure 10-8: iCMC Information Panel Temperature The current CPU temperature. System 1 The current system temperature. System 2 The current system temperature. Environment 1 The current environment temperature detected by the temperature sensor on the system.

  • Page 224: Table 10-1: Icmc Information Panel Description

    AFL2-W19A/AB-H61 P a n e l P C The system fan speed. “0” indicates the fan is off. System Info CPU Frequency The CPU frequency parameters. CPU Loading The CPU loading parameters. CPU Type The brand name of the CPU being used in the system. Light Fanless Settings BIOS Overwrite When the “Temperature of Fanless”...

  • Page 225: Chart Panel

    AFL2-W19A/AB-H61 P a n e l P C 10.2.2 Ch a rt P a n e l Figure 10-9 shows the chart panel interface. The line chart is used to visualize the system data listed in the information panel. The following information is displayed in different color lines: ...

  • Page 226: Figure 10-10: Icmc - Time Interval Adjustment

    AFL2-W19A/AB-H61 P a n e l P C The user can adjust the time interval between sampling by selecting the options in the Sampling drop down menu (see Figure 10-10). The x-axis of the line chart (Time in seconds) will change according to the adjustment. Figure 10-10: iCMC –...

  • Page 227: A Safety Precautions

    AFL2-W19A/AB-H61 P a n e l P C Appendix S a fe ty P re c a u tio n s P a g e 207...

  • Page 228: Safety Precautions

    AFL2-W19A/AB-H61 P a n e l P C WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the AFL2-W19A/AB-H61. A.1 S a fe ty P re c a u tio n s Please follow the safety precautions outlined in the sections that follow: A.1.1 Ge n e ra l S a fe ty P re c a u tio n s Please ensure the following safety precautions are adhered to at all times.

  • Page 229: Cpu Temperature Warning

    AFL2-W19A/AB-H61 P a n e l P C A.1.2 CP U Te m p e ra tu re Wa rn in g WARNING: If the CPU Temperature Alert LED shows RED, the CPU core temperature is too high. To lower the CPU temperature, lower the environment temperature or decrease the amount of running programs.

  • Page 230: Product Disposal

    AFL2-W19A/AB-H61 P a n e l P C A.1.4 P ro d u c t Dis p o s a l CAUTION: Risk of explosion if battery is replaced by and incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations.

  • Page 231: Cleaning Tools

    AFL2-W19A/AB-H61 P a n e l P C  Except for the LCD panel, never spray or squirt liquids directly onto any other components. To clean the LCD panel, gently wipe it with a piece of soft dry cloth or a slightly moistened cloth. ...

  • Page 232: B Bios Menu Options

    AFL2-W19A/AB-H61 P a n e l P C Appendix BIOS Me n u Op tio n s P a g e 212...
  • Page 233 AFL2-W19A/AB-H61 P a n e l P C  BIOS Information .......................128  iWDD Vendor ........................128  iWDD Version ........................129  Memory Information ......................129  System Date [xx/xx/xx] ......................129  System Time [xx:xx:xx] .....................129  ACPI Sleep State [S1 (CPU Stop Clock)] .................131 ...
  • Page 234 AFL2-W19A/AB-H61 P a n e l P C  Restore AC Power Loss [Last State] ................151  Power Saving Function [Disabled] ...................151  WIFI Function [Enabled] ....................152  DMIC Function [Enabled] ....................152  BT Function [Enabled] .......................152  RFID Function [Enabled] ....................152 ...

  • Page 235: C One Key Recovery

    AFL2-W19A/AB-H61 P a n e l P C Ap p e n d ix On e Ke y Re c o ve ry P a g e 215...

  • Page 236: One Key Recovery Introduction

    AFL2-W19A/AB-H61 P a n e l P C C.1 On e Ke y Re c o ve ry In tro d u c tio n The IEI one key recovery is an easy-to-use front end for the Norton Ghost system backup and recovery tool.

  • Page 237: System Requirement

    AFL2-W19A/AB-H61 P a n e l P C 5. Create factory default image (see Section C.2.5) After completing the five initial setup procedures as described above, users can access the recovery tool by pressing <F3> while booting up the system. The detailed information of each function is described in Section C.5.

  • Page 238: Supported Operating System

    AFL2-W19A/AB-H61 P a n e l P C The partition created for recovery images must be big enough to contain both the factory default image and the user backup image. The size must be calculated before creating the partitions. Please take the following table as a reference when calculating the size of the partition.

  • Page 239: Setup Procedure For Windows

    AFL2-W19A/AB-H61 P a n e l P C RedHat RHEL-5.4 RedHat 9 (Ghirke) Ubuntu 8.10 (Intrepid) Ubuntu 7.10 (Gutsy) Ubuntu 6.10 (Edgy) Debian 5.0 (Lenny) Debian 4.0 (Etch) SuSe 11.2 SuSe 10.3 NOTE: Installing unsupported OS versions may cause the recovery tool to fail. C.2 S e tu p P ro c e d u re fo r Win d ows Prior to using the recovery tool to backup or restore, a few setup procedures are required.

  • Page 240: Hardware And Bios Setup

    AFL2-W19A/AB-H61 P a n e l P C NOTE: The setup procedures described below are for Microsoft Windows operating system users. For Linux, most of the setup procedures are the same except for several steps described in Section C.3. C.2.1 Ha rdwa re a n d BIOS S e tu p S te p 1: Make sure the system is powered off and unplugged.

  • Page 241: Figure C-2: Launching The Recovery Tool

    AFL2-W19A/AB-H61 P a n e l P C Figure C-2: Launching the Recovery Tool S te p 3: The recovery tool setup menu is shown as below. Figure C-3: Recovery Tool Setup Menu S te p 4: Press <6> then <Enter>. P a g e 221...

  • Page 242: Figure C-4: Command Prompt

    AFL2-W19A/AB-H61 P a n e l P C Figure C-4: Command Prompt The command prompt window appears. Type the following commands (marked S te p 5: in red) to create two partitions. One is for the OS installation; the other is for saving recovery files and images which will be an invisible partition.

  • Page 243: Figure C-5: Partition Creation Commands

    AFL2-W19A/AB-H61 P a n e l P C Figure C-5: Partition Creation Commands P a g e 223...

  • Page 244: Install Operating System, Drivers And Applications

    AFL2-W19A/AB-H61 P a n e l P C NOTE: Use the following commands to check if the partitions were created successfully. S te p 6: Press any key to exit the recovery tool and automatically reboot the system. Please continue to the following procedure: Build the Recovery Partition.S t e p 0 : C.2.3 In s ta ll Op e ra tin g S ys te m , Drive rs a n d Ap p lic a tio n s Install the operating system onto the unlabelled partition.

  • Page 245: Building The Recovery Partition

    AFL2-W19A/AB-H61 P a n e l P C C.2.4 Bu ild in g th e Re c o ve ry P a rtitio n Put the recover CD in the optical drive. S te p 1: Start the system. S te p 2: S te p 3: Boot the system from the recovery CD.

  • Page 246: Figure C-8: Building The Recovery Partition

    AFL2-W19A/AB-H61 P a n e l P C S te p 5: The Symantec Ghost window appears and starts configuring the system to build a recovery partition. In this process the partition created for recovery files in Section C.2.2 is hidden and the recovery tool is saved in this partition. Figure C-8: Building the Recovery Partition S te p 6: After completing the system configuration, press any key in the following window...

  • Page 247: Create Factory Default Image

    AFL2-W19A/AB-H61 P a n e l P C C.2.5 Cre a te Fa c to ry De fa u lt Im a g e NOTE: Before creating the factory default image, please configure the system to a factory default environment, including driver and application installations.

  • Page 248: Figure C-12: About Symantec Ghost Window

    AFL2-W19A/AB-H61 P a n e l P C Figure C-12: About Symantec Ghost Window S te p 4: Use mouse to navigate to the option shown below (Figure C-13). Figure C-13: Symantec Ghost Path S te p 5: Select the local source drive (Drive 1) as shown in Figure C-14. Then click OK. P a g e 228...

  • Page 249: Figure C-14: Select A Local Source Drive

    AFL2-W19A/AB-H61 P a n e l P C Figure C-14: Select a Local Source Drive Select a source partition (Part 1) from basic drive as shown in Figure C-15. S te p 6: Then click OK. Figure C-15: Select a Source Partition from Basic Drive Select 1.2: [Recovery] NTFS drive and enter a file name called S te p 7: (Figure C-16).

  • Page 250: Figure C-16: File Name To Copy Image To

    AFL2-W19A/AB-H61 P a n e l P C Figure C-16: File Name to Copy Image to When the Compress Image screen in Figure C-17 prompts, click High to make S te p 8: the image file smaller. Figure C-17: Compress Image P a g e 230...

  • Page 251: Figure C-18: Image Creation Confirmation

    AFL2-W19A/AB-H61 P a n e l P C The Proceed with partition image creation window appears, click Yes to S te p 9: continue. Figure C-18: Image Creation Confirmation The Symantec Ghost starts to create the factory default image (Figure C-19). S te p 10: Figure C-19: Image Creation Complete When the image creation completes, a screen prompts as shown in Figure C-20.

  • Page 252: Auto Recovery Setup Procedure

    AFL2-W19A/AB-H61 P a n e l P C S te p 12: The recovery tool main menu window is shown as below. Press any key to reboot the system. S t e p 0 : Figure C-21: Press Any Key to Continue C.3 Au to Re c o ve ry S e tu p P ro c e d u re The auto recovery function allows a system to automatically restore from the factory default image after encountering a Blue Screen of Death (BSoD) or a hang for around 10...

  • Page 253: Figure C-22: Auto Recovery Utility

    AFL2-W19A/AB-H61 P a n e l P C Figure C-22: Auto Recovery Utility Reboot the system from the recovery CD. When prompted, press any key to S te p 3: boot from the recovery CD. It will take a while to launch the recovery tool. Please be patient! Figure C-23: Launching the Recovery Tool When the recovery tool setup menu appears, press <4>...

  • Page 254: Figure C-25: Building The Auto Recovery Partition

    AFL2-W19A/AB-H61 P a n e l P C S te p 5: The Symantec Ghost window appears and starts configuring the system to build an auto recovery partition. In this process the partition created for recovery files in Section C.2.2 is hidden and the auto recovery tool is saved in this partition. Figure C-25: Building the Auto Recovery Partition After completing the system configuration, the following message prompts to S te p 6:...

  • Page 255: Figure C-27: Image Creation Complete

    AFL2-W19A/AB-H61 P a n e l P C The Symantec Ghost starts to create the factory default image (Figure C-27). S te p 7: Figure C-27: Image Creation Complete S te p 8: After completing the system configuration, press any key in the following window to restart the system.

  • Page 256: Bios Menu 24: Iei Feature

    AFL2-W19A/AB-H61 P a n e l P C Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced iEi Feature Auto Recovery Function Reboot and recover Auto Recovery Function [Disabled] system automatically within 10 min, when OS Micro SD Card [Enabled] crashes.

  • Page 257: Setup Procedure For Linux

    AFL2-W19A/AB-H61 P a n e l P C C.4 S e tu p P ro c e d u re fo r Lin u x The initial setup procedure for Linux system is mostly the same with the procedure for Microsoft Windows.

  • Page 258: Figure C-30: Manual Recovery Environment For Linux

    AFL2-W19A/AB-H61 P a n e l P C Create a recovery partition. Insert the recovery CD into the optical disk drive. S te p 3: Follow Step 1 Step 3 described in Section C.2.2. Then type the following commands (marked in red) to create a partition for recovery images. system32>diskpart DISKPART>list vol DISKPART>sel disk 0...

  • Page 259: Figure C-31: Access Menu.lst In Linux (Text Mode)

    AFL2-W19A/AB-H61 P a n e l P C cd /boot/grub vi menu.lst Figure C-31: Access menu.lst in Linux (Text Mode) Modify the menu.lst as shown below. S te p 6: S te p 7: The recovery tool menu appears. (Figure C-32) Figure C-32: Recovery Tool Menu P a g e 239...

  • Page 260: Recovery Tool Functions

    AFL2-W19A/AB-H61 P a n e l P C Create a factory default image. Follow Step 2 Step 12 described in Section S te p 8: C.2.5 to create a factory default image. S t e p 0 : C.5 Re c o ve ry To o l Fu n c tio n s After completing the initial setup procedures as described above, users can access the recovery tool by pressing <F3>...

  • Page 261: Factory Restore

    AFL2-W19A/AB-H61 P a n e l P C WARNING: All data in the system will be deleted during the system recovery. Please backup the system files before restoring the system (either Factory Restore or Restore Backup). C.5.1 Fa c to ry Re s to re To restore the factory default image, please follow the steps below.

  • Page 262: Backup System

    AFL2-W19A/AB-H61 P a n e l P C Figure C-35: Recovery Complete Window C.5.2 Ba c ku p S ys te m To backup the system, please follow the steps below. Type <2> and press <Enter> in the main menu. S te p 1: The Symantec Ghost window appears and starts to backup the system.

  • Page 263: Restore Your Last Backup

    AFL2-W19A/AB-H61 P a n e l P C Figure C-37: System Backup Complete Window C.5.3 Re s to re Yo u r La s t Ba c ku p To restore the last system backup, please follow the steps below. Type <3>...

  • Page 264: Manual

    AFL2-W19A/AB-H61 P a n e l P C Figure C-39: Restore System Backup Complete Window C.5.4 Ma n u a l To restore the last system backup, please follow the steps below. Type <4> and press <Enter> in the main menu. S te p 2: The Symantec Ghost window appears.

  • Page 265: Restore Systems From A Linux Server Through Lan

    AFL2-W19A/AB-H61 P a n e l P C C.6 Re s to re S ys te m s fro m a Lin u x S e rve r thro u g h LAN The One Key Recovery allows a client system to automatically restore to a factory default image saved in a Linux system (the server) through LAN connectivity after encountering a Blue Screen of Death (BSoD) or a hang for around 10 minutes.

  • Page 266: Configure Dhcp Server Settings

    AFL2-W19A/AB-H61 P a n e l P C C.6.1 Co n fig u re DHCP S e rve r S e ttin g s Install the DHCP S te p 1: #yum install dhcp (CentOS, commands marked in red) #apt-get install dhcp3-server (Debian, commands marked in blue) Confirm the operating system default settings: dhcpd.conf.

  • Page 267: Configure Tftp Settings

    AFL2-W19A/AB-H61 P a n e l P C filename “pxelinux.0”; C.6.2 Co n fig u re TFTP S e ttin g s S te p 1: Install the tftp, httpd and syslinux. #yum install tftp-server httpd syslinux (CentOS) #apt-get install tftpd-hpa xinetd syslinux (Debian) S te p 2: Enable the TFTP server by editing the “/etc/xinetd.d/tftp”...

  • Page 268: Configure One Key Recovery Server Settings

    AFL2-W19A/AB-H61 P a n e l P C Debian Replace the TFTP settings from “inetd” to “xinetd” and annotate the “inetd” by adding “#”. #vi /etc/inetd.conf Modify: #tftp dgram udp wait root /usr/sbin..(as shown below) #vi /etc/xinetd.d/tftp C.6.3 Co n fig u re On e Ke y Re c o ve ry S e rve r S e ttin g s Copy the Utility/RECOVERYR10.TAR.BZ2 package from the One Key S te p 1: Recovery CD to the system (server side).

  • Page 269: Start The Dhcp, Tftp And Http

    AFL2-W19A/AB-H61 P a n e l P C C.6.4 Sta rt th e DHCP, TFTP a n d HTTP Start the DHCP, TFTP and HTTP. For example: CentOS #service xinetd restart #service httpd restart #service dhcpd restart Debian #/etc/init.d/xinetd reload #/etc/init.d/xinetd restart #/etc/init.d/dhcp3-server restart C.6.5 Cre a te S ha re d Dire c to ry...

  • Page 270: Setup A Client System For Auto Recovery

    AFL2-W19A/AB-H61 P a n e l P C Modify: [image] comment = One Key Recovery path = /share/image browseable = yes writable = yes public = yes create mask = 0644 directory mask = 0755 S te p 4: Edit “/etc/samba/smb.conf” for your environment. For example: Modify the hostname S te p 5: #vi /etc/hostname...
  • Page 271 AFL2-W19A/AB-H61 P a n e l P C Continue to configure the Boot Option Priorities BIOS option of the client S te p 2: system: Boot Option #1  remain the default setting to boot from the original OS. Boot Option #2  select the boot from LAN option. Save changes and exit BIOS menu.
  • Page 272 AFL2-W19A/AB-H61 P a n e l P C NOTE: A firewall or a SELinux is not in use in the whole setup process. If there is a firewall or a SELinux protecting the system, modify the configuration information to accommodate them. P a g e 252...

  • Page 273: Other Information

    AFL2-W19A/AB-H61 P a n e l P C C.7 Oth e r In fo rm a tio n C.7.1 Us in g AHCI Mo d e o r ALi M5283 / VIA VT6421A Co n tro lle r When the system uses AHCI mode or some specific SATA controllers such as ALi M5283 or VIA VT6421A, the SATA RAID/AHCI driver must be installed before using one key recovery.
  • Page 274 AFL2-W19A/AB-H61 P a n e l P C When the following window appears, press <S> to select “Specify Additional S te p 5: Device”. In the following window, select a SATA controller mode used in the system. Then S te p 6: press <Enter>.

  • Page 275: System Memory Requirement

    AFL2-W19A/AB-H61 P a n e l P C S te p 7: After pressing <Enter>, the system will get into the recovery tool setup menu. Continue to follow the setup procedure from Step 4 in Section C.2.2 Create Partitions to finish the whole setup process. S t e p 0 : C.7.2 S ys te m Me m o ry Re q u ire m e n t To be able to access the recovery tool by pressing <F3>...

  • Page 276: D Hazardous Materials Disclosure

    AFL2-W19A/AB-H61 P a n e l P C Appendix Ha za rd o u s Ma te ria ls Dis c lo s u re P a g e 256...

  • Page 277: Hazardous Material Disclosure Table For Ipb Products Certified As

    AFL2-W19A/AB-H61 P a n e l P C D.1 Ha za rd o u s Ma te ria l Dis c lo s ure Ta b le fo r IP B P ro d u c ts Ce rtifie d a s Ro HS Co m p lia n t Un d e r 2002/95/EC With o u t Me rc u ry The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards.
  • Page 278 AFL2-W19A/AB-H61 P a n e l P C Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl Ethers (CR(VI)) (PBB) (PBDE) Housing Display Printed Circuit Board Metal Fasteners Cable Assembly Fan Assembly Power Supply Assemblies...
  • Page 279 AFL2-W19A/AB-H61 P a n e l P C 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本 产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (CR(VI)) (PBB) (PBDE) 壳体 显示 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在...

This manual is also suitable for:

Afl2-w19ab-h61 seriesAfl2-w19a-h61-i5/r-r11Afl2-w19ab-h61-i5/r-r11Afl2-w19a-h61-i5/pc-r11Afl2-w19ab-h61-i5/pc-r11Afl2-w19a-h61-i3/r-r11 ... Show all

Table of Contents