Usb Device Connection; Figure 4-27: Usb Device Connection - IEI Technology AFL A-N270 Series User Manual

4.11.3 USB Device Connection

There are two external USB 2.0 connectors. To connect a USB 2.0 or USB 1.1 device,
please follow the instructions below.
Located the USB connectors. The locations of the USB connectors are shown
Step 1:
in Chapter 2.
Align the connectors. Align the USB device connector with one of the
Step 2:
connectors on the bottom panel. See Figure 4-27.

Figure 4-27: USB Device Connection

Insert the device connector. Once aligned, gently insert the USB device
Step 3:
connector into the onboard connector.
Page 56
AFL-xxA-N270 Series Panel PC
Step 0: