Figure 3-24: Stand Mounting (Stand-A/Bxx) - IEI Technology afl2-w15b-h61 Introductory Manual

3.12.5 Stand Mounting
To mount the AFL2-W15B-H61 using the stand mounting kit, please follow the steps
below.
Step 1: Locate the screw holes on the rear of the AFL2-W15B-H61. This is where the
bracket will be attached.
Step 2: Align the bracket with the screw holes.
Step 3: To secure the bracket to the AFL2-W15B-H61 insert the retention screws into
the screw holes and tighten

Figure 3-24: Stand Mounting (Stand-A/Bxx)

3.13 External Peripheral Device Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
Audio devices
Page 40
them.S t e p 0 :
AFL2-W15B-H61